# 3D Print Assistant — Print settings made simple

> Generates optimized 3D printing slicer settings for printers and filaments. (iPhone/iPad app by Mustafa Ozturk.)

- Source: https://appshunter.io/ios/app/3d-print-assistant/id6761634761 (this page in markdown: same URL + `.md`)
- Developer: [Mustafa Ozturk](https://appshunter.io/developer/1890554318)
- Category: Utilities, Productivity
- Price: Free
- Rating: 5.00/5 from 1 App Store ratings · 1 written reviews indexed
- Age rating: 4+
- Requires: iOS 17.0 · 7 MB
- Languages: American English, Danish
- Released: 2026-04-16
- Data updated: 2026-08-19
- Monetization: free with in-app purchases
- User reviews in markdown: https://appshunter.io/ios/app/3d-print-assistant/id6761634761/reviews.md

## What is 3D Print Assistant?

Working slicer settings for your exact printer and filament — in under a minute.

Pick your printer, nozzle, material, and what you're actually trying to print. 3D Print Assistant turns that into an optimised slicer profile — layer height, speeds, temperatures, infill, supports, and more — organised to match the tab structure of Bambu Studio, OrcaSlicer, or PrusaSlicer.

EXPORT STRAIGHT TO YOUR SLICER
For 66 of the 83 supported printers, export a real profile file and import it — no retyping. Where your slicer genuinely ships no profile for a machine, the app says so up front and hands you the settings as text instead.

TWO MODES — YOUR CHOICE
Simple gives you just the essentials. Switch to Advanced for the full picture, with every setting explained so you know what it does and why it's set that way.

WHAT'S INCLUDED
• 80+ printers across 14 brands — with optional alerts when more are ready
• 19 filament profiles — PLA, PETG, ABS, ASA, TPU, PA, PC, CF blends, PLA Metal, and more
• 9 nozzle types with compatibility checking
• Native profile export when your slicer publishes a matching machine preset — with a clear text fallback everywhere else
• Workshop profile saving plus clear backup and restore
• A pre-print checklist tailored to your exact material and config
• Works offline after install — no account or subscription required

BUILT BY SOMEONE WHO USES IT
3D Print Assistant started because I couldn't find a structured way to pick the right settings for a new material or printer. So I built it. The recommendations draw on community knowledge, hands-on experience, and manufacturer defaults — a starting point you can trust, then tune to your setup. Every setting shows what it does and why it was chosen, so you stay in control.

Everything in the app is free. If it saves you a failed print or two, there's an optional tip jar — nothing is locked behind it.

Works with Bambu Studio, OrcaSlicer, and PrusaSlicer.

## Key features

- Optimized slicer profile generation
- Printer and filament compatibility
- Direct profile export to slicers
- Simple and Advanced modes
- Pre-print checklist
- Offline functionality
- Workshop profile saving

## Recent user reviews (1 of 1)

All indexed reviews: https://appshunter.io/ios/app/3d-print-assistant/id6761634761/reviews.md

### 5/5 — Outstanding hidden gem

*2026-08-17*

What a fantastic find! This app is an amazing resource for anyone involved in 3D printing who needs guidance or support. The developer has done a great job, and I can’t wait to see where it goes next. Highly recommended!

**Developer response:** Thank you so much 🙏 I’m cooking something very special for the upcoming weeks.. Stay tuned 😊

## Frequently asked questions about 3D Print Assistant

### What printers does 3D Print Assistant support?

3D Print Assistant supports over 80 printers across 14 brands. The app provides compatibility checking for nozzle types and aims to offer native profile export for many of these machines.

### Can I export settings to my slicer?

Yes, for 66 of the 83 supported printers, you can export a real profile file directly to Bambu Studio, OrcaSlicer, or PrusaSlicer. Where native export isn't possible, the app provides the settings as clear text.

### Does 3D Print Assistant work offline?

Yes, 3D Print Assistant works offline after installation. No account or subscription is required to use its core features, making it convenient for use anywhere.

### What is the difference between Simple and Advanced modes?

The Simple mode provides only the essential settings for quick profile generation. The Advanced mode offers a more comprehensive view, explaining every setting in detail so you understand its purpose and why it's configured that way.

### How often is 3D Print Assistant updated?

The app was last updated on August 19, 2026, with version 1.1.4. Updates may include new printer profiles or enhancements based on user feedback and community knowledge.

### Is 3D Print Assistant free to use?

The app is free to use, with an optional tip jar for users who find it helpful. Nothing is locked behind a paywall, and the tip jar is entirely voluntary.

### What is the age rating for 3D Print Assistant?

3D Print Assistant has an age rating of 4+, making it suitable for a wide range of users interested in 3D printing.

### What filament types are supported?

The app includes profiles for 19 different filament types, such as PLA, PETG, ABS, ASA, TPU, PA, PC, CF blends, and PLA Metal, among others.

## Version history (last 5 releases)

### 1.1.4 — 2026-08-19

This update makes profiles safer, expands printer coverage, and improves Danish output.

- Added Creality Ender-3 S1, Ender-3 S1 Pro, and Hi, plus FlashForge Adventurer 3 and Anycubic Kobra 2 Neo.
- Added epoxy-resin build-plate guidance and reliable selection persistence.
- Added an acceleration safety clamp so recommendations respect each printer's published limit.
- Added Elegoo to the primary brand list.
- Added swipe-from-the-edge to go back a step.
- Improved Danish text across profile output, export, and error states.
- Fixed scrolling on the brand screen when a swipe starts on a brand card.
- Fixed the nozzle list offering sizes your printer can't actually fit.

### 1.1.3 — 2026-07-31

Turns out "Export" only really worked if you owned a Bambu Lab printer. Everyone else got a very confident error message blaming their phone. That one's on me.

Export now works on 66 printers instead of 17 — and when your slicer genuinely has no profile for your machine, the app says so instead of pretending.

### 1.1.0 — 2026-07-24

A big update focused on getting from a profile to an actual print faster.

- Native export to Bambu Studio, OrcaSlicer, and PrusaSlicer — build your profile here, send it straight to your slicer, and print. No more copying settings by hand.
- A smarter Workshop — save your profiles and back them up or restore them anytime, one at a time or all at once.
- Optional notifications when new printers and meaningful app updates arrive — completely off until you choose to turn them on, and easy to change anytime.
- Fixed a false "unsaved changes" prompt after saving or loading a Workshop profile, and repaired the community Discord link.

Still built by one person, still tested on real settings, and still shaped by your feedback.

### 1.0.4 — 2026-05-20

A quiet but honest update, focused on better recommendations when you print outside a perfect room.

- Smarter environment handling: a cold garage, hot room, or humid space now adjusts fan speeds, temperatures, and first-layer bed warmth more accurately.
- More honest warnings: when your printer's limits cap a recommended temperature, the app now shows the value it actually applied - no more optimistic numbers.
- Cleaner warning text, with duplicate environment labels removed.
- Advanced cooling now shows environment-scaled fan values plus a "slow below layer time" row.
- Added the Creality i7 to the built-in printer catalog.

Still built by one person, still tested on real settings, and still learning from your feedback.

### 1.0.3 — 2026-05-11

A small-but-useful update shaped by real printer feedback.

- Added more printer coverage, including Elegoo Centauri Carbon plus Bambu H2D Pro and X2D.
- Cleaned up the Anycubic Kobra X profile so it behaves like the open-frame machine it actually is.
- Added PLA Metal support, because shiny filament deserves settings with fewer vibes and more plan.
- Improved safer temperature and nozzle recommendations, including better clamping for printer limits.
- Improved Advanced output with separate initial-layer and other-layer nozzle and bed temperatures.
- Added a safer catalog update path so future printer support can be delivered more reliably.
- Added lightweight, privacy-friendly usage analytics so I can see which printers and materials people actually use - no accounts, no personal tracking, no generated profile data.
- Added a gentle review prompt, because App Store reviews really do help small hobby projects.

As always: built by one person, tested on real settings, and still very much learning from your feedback.

## Apps similar to 3D Print Assistant

| App | Rating | Price | Category |
| --- | --- | --- | --- |
| [SpoolFlux](https://appshunter.io/ios/app/spoolflux/id6757957454) | 5.0 (3) | Free | Utilities |
| [3D Object & Room Scanner](https://appshunter.io/ios/app/3d-object-and-room-scanner/id6480382590) | 4.3 (27) | Free | Utilities |
| [TigerTag RFID Connect](https://appshunter.io/ios/app/tigertag-rfid-connect/id6745437963) | 5.0 (1) | Free | Utilities |
| [3D Printing Thingiverse Models](https://appshunter.io/ios/app/3d-printing-thingiverse-models/id6749553636) | 5.0 (3) | Free | Utilities |
| [Spool Programmer](https://appshunter.io/ios/app/spool-programmer/id6753324939) | 5.0 (3) | Free | Utilities |
| [Printer Tools App](https://appshunter.io/ios/app/printer-tools-app/id6745528803) | 2.7 (3) | Free | Utilities |

## Related topics

[anycubic kobra s1](https://appshunter.io/ios/topics/anycubic-kobra-s1) · [anycubic slicer](https://appshunter.io/ios/topics/anycubic-slicer) · [elegoo centauri carbon](https://appshunter.io/ios/topics/elegoo-centauri-carbon) · [flashforge ad5x](https://appshunter.io/ios/topics/flashforge-ad5x) · [anycubic kobra](https://appshunter.io/ios/topics/anycubic-kobra) · [anycubic](https://appshunter.io/ios/topics/anycubic) · [prusaslicer](https://appshunter.io/ios/topics/prusaslicer) · [anycubic kobra x](https://appshunter.io/ios/topics/anycubic-kobra-x)

---

*Data collected daily from the US App Store and indexed by [AppsHunter](https://appshunter.io/). User reviews are verbatim App Store reviews. Ratings, prices and chart positions refresh continuously; this snapshot is from 2026-08-19.*