# amina charging — Configure your amina charger

> Configure your amina charger (iPhone/iPad app by amina charging.)

- Source: https://appshunter.io/ios/app/amina-charging/id6822180841 (this page in markdown: same URL + `.md`)
- Developer: [amina charging](https://appshunter.io/developer/6822180843)
- Category: Utilities, Productivity
- Price: Free
- Age rating: 4+
- Requires: iOS 16.4 · 50 MB
- Languages: American English
- Released: 2026-10-19
- Data updated: 2026-10-29

## What is amina charging?

amina charging sets up amina EV chargers over Bluetooth. Stand next to the charger, connect, and configure it from your phone. No laptop or cable needed, and no account. 

FOR INSTALLERS 
• Connect the charger to Wi-Fi, or change its Wi-Fi settings later 
• Choose or change the OCPP back end the charger reports to 
• Update the charger's firmware on site 
• Check the charger's status: charging speed right now and the last session 

FOR EVERYONE ELSE
• Change your charger's Wi-Fi settings, for example after getting a new router 
• Check the charger's status and keep its firmware up to date 

WORKS WITH 
• amina C, amina C2, amina M and amina M2: all features 
• amina S and amina S2: status, and firmware updates 

ABOUT YOUR DATA 
There is no account to create, and the app sends nothing about you or your charger to amina. 

LANGUAGE 
The app is in English for now. Norwegian, Danish, Swedish and Finnish versions will follow. 

HELP
aminacharging.com/support

## Is amina charging safe?

Not enough ratings yet to assess amina charging.

## Is amina charging legit?

amina charging has limited verification signals. The AppsHunter Legitimacy Score for amina charging is 58 out of 100 points across 7 verification signals from App Store and developer data.


## Version history (last 5 releases)

### 1.6.9 — 2026-10-28

• Locate now works on every charger, with a radar sweep, "warmer / colder" guidance and a victory buzz when you find it
• Name your chargers (stored on your phone only)
• Your last-used charger has its own card with a Connect button
• Clearer Connection screen: backend and operator on separate rows, with operator icons
• One tap to use this phone's Wi-Fi name during setup
• Spinners while LTE and Ethernet connect
• Tidier failed-connection cards

### 1.6.7 — 2026-10-27

This version makes it easier to see which operator your charger uses, and makes the Connection and Software tabs clearer while the app talks to the charger.

Operators
• Each operator now shows its logo: Monta, Spirii, Road, eMabler, Current, Fount, Ampeco and Virta. The picker shows the logo of your operator, and the list shows each logo with its name.
• The row says "Connect to" when you pick a different operator than the charger has. It goes back to "Connected to" when the charger reports the change.
• The operator you pick is highlighted in the list, and the list scrolls on small screens.
• A certificate that your phone trusts now shows a checkmark seal.

Connection tab
• When the charger is connected to its operator, the operator's logo shows under "Connected to".
• After you change the operator or its certificate, the charger restarts its connectivity board. The tab now shows "Waiting…" for up to 2 minutes instead of "Disconnected".

Software tab
• The first card is now "Firmware". It shows the connectivity board and the power board versions side by side (amina C and M), with a refresh button.
• "New software" has a refresh button in place of pull-to-refresh.

Everywhere
• Grey placeholders replace spinners and "Reading…" while the app reads from the charger, so screens do not jump when the values arrive.
• Settings choices and some small buttons are bigger and easier to tap.
• No white corners behind screens when you move between them in Dark Mode.
• The Wi-Fi signal strength is removed, because the charger does not report it yet.
• The support email address is updated.

### 1.6.2 — 2026-10-24

For amina C/M:
Operator card improvements

General:
Popup info buttons rather than expandable info

### 1.6.1 — 2026-10-23

This version makes the connection to your charger more dependable.
The app connects again to a charger when the phone drops the link. Before, the app could stop at the first failure and showed an error.

### 1.5.5 — 2026-10-22

In this version, we have done a few tweaks and improvements.

What's new
• Beta and alpha software is marked and asks you to confirm before installing.
• The Installed card is colour-coded by the kind of software, with a key to the colours (Production is listed first).
• Software that is only available on request shows how to ask support for it.
• The Connection screen highlights the chosen connection in orange, and refresh works for every connection.
• The app now fits small phones: on the Overview and Software screens the charger picture and text adapt to the screen, and "Choose file" moves up beside the title.
• On a small phone the charger's status shows in the heading at the top.

What's fixed
• The software list is simpler, and shows the full date.
• Operator now comes before Find this charger in Advanced, and the restart button says "Restart connectivity".
• If you leave the Bluetooth PIN empty or dismiss it, the app no longer opens the charger as if it were paired. It tells you pairing did not complete.
• Opening a software version on a small phone no longer squeezes the details out of view, and the details now scroll.
• The current graph no longer covers the charger picture on small phones.
• The charger picture appears once its size is settled, instead of resizing as the screen opens.
• Small tweaks behind the scenes for better functionality.

## Apps similar to amina charging

| App | Rating | Price | Category |
| --- | --- | --- | --- |
| [AMPiiN](https://appshunter.io/ios/app/ampiin/id6753648209) | — | Free | Utilities |
| [Plugchoice](https://appshunter.io/ios/app/plugchoice/id6447251299) | — | Free | Utilities |
| [Smart NFC: Read & Write Tags](https://appshunter.io/ios/app/smart-nfc-read-and-write-tags/id6749724229) | — | Free | Utilities |
| [Saveeye](https://appshunter.io/ios/app/saveeye/id6444961865) | — | Free | Utilities |
| [EnergyPricing - Electricity](https://appshunter.io/ios/app/energypricing-electricity/id6748013332) | — | $1.99 | Utilities |
| [Konnect +](https://appshunter.io/ios/app/konnect-plus/id1500212342) | 3.0 (2) | Free | Utilities |

---

*Data collected daily from the US App Store and indexed by [AppsHunter](https://appshunter.io/). User reviews are verbatim App Store reviews. Ratings, prices and chart positions refresh continuously; this snapshot is from 2026-10-29.*