# AntennaAlign — Aim antennas with AR & terrain

> Aim antennas with AR & terrain (iPhone/iPad app by Jack Flowerday.)

- Source: https://appshunter.io/ios/app/antennaalign/id6823517407 (this page in markdown: same URL + `.md`)
- Developer: [Jack Flowerday](https://appshunter.io/developer/6803827008)
- Category: Utilities, Navigation
- Price: $2.99
- Age rating: 4+
- Requires: iOS 16.4 · 37 MB
- Languages: American English
- Released: 2026-11-04
- Data updated: 2026-11-06

## What is AntennaAlign?

Aim an antenna exactly where it needs to go.

AntennaAlign shows you where to point, on a map and through your camera, so you can align a dish, Yagi or point-to-point radio without guesswork. It's a handy companion for mesh and LoRa networks, where a well-aimed directional antenna and a clear path make the difference between a dropped link and a solid one.

ALIGN WITH AUGMENTED REALITY • Open the camera view and a target marker appears over the real horizon • Clear on-screen guidance: turn left or right, tilt up or down, until it reads ON TARGET • A green terrain outline with shaded ridgelines is drawn over the camera image, so you can see the hills between you and the target, out to around 100 km • Instantly see when the target sits behind terrain • Take a screenshot of the view to keep a record of your setup

PLAN ON THE MAP • Tap the map to set a target, or set your own origin by hand if GPS isn't available • Instant distance, bearing and tilt angle, using ground elevation at both ends • Set your antenna height, the target's antenna height and the link frequency

CHECK THE PATH • A terrain profile between you and the target • Line of sight and first Fresnel zone clearance, including earth curvature and refraction (k-factor) • A clear verdict (path clear, marginal or blocked) and where the worst point is • Set the link frequency to match your radio, for example 868 or 915 MHz for LoRa, 2.4 or 5.8 GHz for Wi-Fi links

SCAN FOR NEARBY CELL SITES (AUSTRALIA, CANADA, NEW ZEALAND, UK AND USA) • Hold up your camera to see floating labels over nearby cell sites, or switch to your own saved targets • Each cell site shows its carrier and distance, plus 4G or 5G and licensed bands (such as B28, B66 or n78) where known • Labels shade from green when close to red at the edge of your scan distance, which you can set from 1 to 100 km • Faded, dashed labels are hidden behind terrain, so you can see which sites have a clear path • Save a screenshot of the scan to your photos • Australia and Canada use regulator licence records (ACMA and ISED), so a site may be listed even if its equipment has since changed • UK, New Zealand and most US sites come from crowdsourced OpenCelliD data, so their positions are estimates and are marked ≈

SAVE YOUR TARGETS • Save a target with its antenna height and frequency, and reopen it any time • Add a target by typing in its coordinates

CALIBRATE FOR YOUR PHONE • Sync the heading against a landmark you can see • Compass and tilt offsets, magnetic declination and camera field of view settings

BUILT FOR THE FIELD • Works on iPhone and iPad • Light and dark appearance • The camera views remind you when your position has been set by hand rather than by GPS • No account, no ads and no tracking

Good to know: terrain and map data are downloaded as you use the app, so you need a data connection. Terrain data is bare-earth at about 90 m resolution, so trees and buildings are not included. Metal can throw off a phone's compass, so calibrate a few metres away from steel masts and brackets.

## Is AntennaAlign safe?

Not enough ratings yet to assess AntennaAlign.

## Is AntennaAlign legit?

AntennaAlign has limited verification signals. The AppsHunter Legitimacy Score for AntennaAlign is 50 out of 100 points across 7 verification signals from App Store and developer data.


## Version history (last 2 releases)

### 1.0.2 — 2026-11-05

Scan now shows nearby cell sites in Canada, New Zealand, the UK and the USA, as well as Australia. • Canada: carrier, 4G/5G and bands from ISED licence records • USA: FCC licence records, plus crowdsourced OpenCelliD sites • UK and New Zealand: crowdsourced OpenCelliD sites • Crowdsourced positions are estimates and are marked ≈ • Australian sites now come from the latest ACMA register

### 1.0.1 — 2026-11-02

No release notes.

---

*Data collected daily from the US App Store and indexed by [AppsHunter](https://appshunter.io/). User reviews are verbatim App Store reviews. Ratings, prices and chart positions refresh continuously; this snapshot is from 2026-11-06.*
