# BendCalc AI: Conduit Bending — EMT Bender: Offset Saddle Fill

> Conduit bending calculator for electricians, providing exact bend marks and code compliance. (iPhone/iPad app by MMG Labs ltd.)

- Source: https://appshunter.io/ios/app/bendcalc-ai-conduit-bending/id6760951628 (this page in markdown: same URL + `.md`)
- Developer: [MMG Labs ltd](https://appshunter.io/developer/1499277120)
- Category: Utilities, Productivity
- Price: Free with in-app purchases
- Rating: 4.40/5 from 11 App Store ratings
- Age rating: 4+
- Requires: iOS 18.0 · 5 MB
- Languages: American English
- Released: 2026-03-22
- Data updated: 2026-10-05
- Monetization: free with in-app purchases

## What is BendCalc AI?

Meet Foreman: the AI assistant for electricians, built into BendCalc.
Stub-Up + Offset: free and unlimited
BendCalc Pro: every calculator, jobs, NEC Chapter 9 fill and Foreman
Already bought BendCalc Pro? Everything you bought stays yours.

BendCalc turns bend math into field-ready marks. Pick your bender once —
results use its published take-up where it applies, shown in tape fractions
to the nearest 1/16".

FOREMAN, THE AI FOR ELECTRICIANS (BETA)
• A chat that keeps up — ask, follow up, and Foreman keeps the last few
  questions of the conversation in mind
• Plans — describe a run in your own words and Foreman works out the
  calculator and the inputs; open it in the calculator for the marks
• Troubleshooting — "Marks didn't land?" gets ranked causes, each with one
  next step
• Conduit fill — ask about a wire list and a conduit, with the NEC Chapter 9
  rows cited
• Explanations — ask about the result on screen and get the marks explained
  in trade language
• Material lists — conduit, bend counts, cut lengths and couplings for a job
• NEC questions — electrical answers with the articles to check in the latest
  NEC edition
• Read aloud — Foreman can read its answers out loud
• Not a member yet? Try Foreman with 3 questions

Foreman is in Beta and can make mistakes. Check its figures in the
calculators, and check code answers against the latest NEC edition and your
local amendments.

FREE AND UNLIMITED
• Stub-Up — mark from the conduit end, arrow alignment, your bender's take-up
• Offset — distance between marks and shrink from the published field tables

THE BENDCALC PRO SUBSCRIPTION
• Foreman, the AI assistant (Beta) — chat, plans, troubleshooting, fill,
  explanations, material lists and NEC questions
• Rolling Offset - true offset, marks, shrink, and rotation from horizontal
• Back-to-Back - both 90° marks from the conduit end
• 3-Point Saddle - center and outer marks, plus shrink
• 4-Point Saddle - all four marks from the saddle center, plus shrink
• Kick — kick mark spacing and shrink
• Rack Offsets - nested marks for every conduit in a rack, 2 to 8 pipes
• NEC Chapter 9 Conduit Fill - fill-limit status for THHN/THWN conductors
  (NEC 2023, Chapter 9 Tables 1, 4, and 5)
• Jobs, history, share cards, site marking, bender calibration and the
  technique lessons

BendCalc Pro is a monthly or annual subscription, with a 7-day trial for new
subscribers. Subscribe monthly or annually for all calculators, premium tools and AI assistance. Subscriptions renew automatically unless cancelled. Access continues until your subscription expires.

IF YOU ALREADY BOUGHT BENDCALC PRO
Thank you. Everything you bought stays yours. Your lifetime purchase keeps all calculators and offline Pro tools unlocked permanently. AI assistance requires an optional monthly or annual subscription. You can also try
Foreman with 3 questions.

WHEN A SUBSCRIPTION ENDS
• Your saved jobs, history and results stay on your iPhone, and you can still
  open them and export a share card or a job PDF
• Adding, editing and recalculating need an active subscription, or the
  calculators you already own

BUILT FOR THE FIELD
• Every constant is sourced — check Math & Sources in the app
• Calculators work offline; Foreman needs a connection. No account required.
• Restore Purchases on any device with your Apple Account

Prices are shown in the App Store before you subscribe, and a subscription is
managed and cancelled in your Apple Account settings.

Terms of Use: https://www.apple.com/legal/internet-services/itunes/dev/stdeula/

## Key features

- Precise bend mark calculations
- Multiple calculator types (stub-up, offset, saddle)
- Supports various hand benders with presets
- Works 100% offline
- NEC conduit fill calculations
- Clear diagrams and readable results

## Pricing and in-app purchases

Base price: Free.

**One-time purchases**

| Purchase | Price | Type |
| --- | --- | --- |
| BendCalc Pro | $9.99 | one-time |


## Is BendCalc AI safe?

Not enough ratings yet to assess BendCalc AI.

## Is BendCalc AI legit?

BendCalc AI: Conduit Bending appears legitimate, with a few gaps. The AppsHunter Legitimacy Score for BendCalc AI is 65 out of 100 points across 7 verification signals from App Store and developer data.


## Frequently asked questions about BendCalc AI

### What types of conduit bends can BendCalc calculate?

BendCalc offers calculators for Stub-Up, Offset, Rolling Offset, 3-Point Saddle, 4-Point Saddle, and Kick bends. It also includes NEC Conduit Fill calculations to ensure code compliance.

### Does BendCalc work offline?

Yes, BendCalc is designed to work 100% offline, making it ideal for use in locations without a signal, such as basements or attics.

### How accurate are BendCalc's calculations?

Calculations use standard centerline-radius methods and are cross-checked against published bender guides and NEC 2023 Chapter 9. It also accounts for specific bender take-up values.

### What is the difference between the free and Pro versions of BendCalc?

The free version includes Stub-Up and Offset calculators. The Pro version, a one-time purchase of $9.99, unlocks all calculators, bender presets, custom bender support, and NEC conduit fill features.

### Can I use BendCalc with my specific conduit bender?

BendCalc comes with standard trade take-up values and a preset for Klein benders. You can also enter your own custom deduct values for other benders, and the app will remember them.

### What devices does BendCalc support?

BendCalc is available for iPhone and iPad, indicated by its support for these devices.

### How often is BendCalc updated?

The app was last updated on June 11, 2026, indicating active development and support for fixing issues.

### What is the age rating for BendCalc?

BendCalc has an age rating of 4+, making it suitable for a wide range of users.

## Version history (last 5 releases)

### 2.14.0 — 2026-09-26

Start your BendCalc Pro trial right after setup.

• After your first worked mark, new installs can start the 7-day BendCalc Pro trial: every calculator, jobs and Foreman, the AI assistant.
• Not ready? Continue with the free calculators. Stub-Up and Offset stay free and unlimited.
• Subscriptions renew automatically unless cancelled. Manage or cancel them in your Apple Account settings.

Already a member or a lifetime owner? Nothing changes for you.

### 2.13.0 — 2026-09-24

Meet Foreman: BendCalc's AI assistant for electricians, in a chat that keeps up with you.

NEW
• Foreman has its own tab. Ask in your own words, follow up, and the conversation carries on.
• Plans: describe a run and Foreman sets up the calculator and the inputs.
• Troubleshooting: "Marks didn't land?" gets ranked causes, each with one next step.
• Conduit fill and explanations: ask about a wire list, or about the result on screen.
• Material lists for a job: conduit, bend counts, cut lengths and couplings.
• NEC questions, with the articles to check in the latest NEC edition.
• Answers can be read aloud.
• Not a member yet? You get 3 questions to try Foreman.
• Foreman is in Beta, so check important figures in the calculators.

BendCalc Pro is now a monthly or annual subscription, with a 7-day trial for new subscribers: every calculator, jobs and Foreman. Subscribe monthly or annually for all calculators, premium tools and AI assistance. Subscriptions renew automatically unless cancelled. Access continues until your subscription expires.
• Stub-Up and Offset stay free and unlimited, as before.
• Saved work is never taken away: if a subscription ends, your jobs, history and results stay readable and exportable.

Already bought BendCalc Pro? Your lifetime purchase keeps all calculators and offline Pro tools unlocked permanently. AI assistance requires an optional monthly or annual subscription.

Thank you, Pro owners: everything you bought stays yours.

### 2.7.0 — 2026-09-15

Three things for the job site: a marking mode built for the bender, your first mark in two taps, and a history of every bend you work.

NEW
• Site marking mode: one giant mark at a time, in tape fractions, with where to measure from and which symbol to line up. Tap to advance. The screen stays on while you mark.
• Hide the keypad on any calculator so the diagram, measurement origins and every result are on screen at once. Bring it back with one tap; your numbers stay put.
• First launch shows a worked stub-up in two taps using labelled defaults. Set up your bender and conduit then, or later in Settings.
• History keeps the exact inputs and assumptions of every bend you work. Reopen one from Home or the History screen; star the ones you repeat.
• Cleared a field or a wire by mistake? Tap Undo.

IMPROVED
• Offset and Rolling Offset now say where each measurement starts.
• Worked examples on Pro screens lay out cleanly at every text size.
• Onboarding steps scroll at large text sizes so every step can be finished.

### 2.6.0 — 2026-08-27

Every calculator now has a pinned keypad with your answer in the bar right above it — type a measurement and read the mark without scrolling or losing your place.

NEW
• Pinned keypad on every calculator, with the running result always in view
• Conduit type, size and bender collapse into one summary row, giving the diagram and marks the screen
• Conduit Fill remembers your wire list between launches — build it once, come back to it on site
• The NEC fill limit is now stated in plain language and marked directly on the fill bar

IMPROVED
• Shrink constants in Reference read as tape fractions, matching the marks you actually measure
• Results line up cleanly with their rules, and fraction glyphs no longer look clipped
• Settings follows your light or dark theme choice

FIXED
• Offset diagram: the distance callout no longer collides with the mark pills
• Kick diagram draws its bend on open instead of appearing flat
• Custom benders reject implausible take-up values, and each take-up band matches its own conduit type
• The fill bar now sizes correctly against its own track on every screen

### 2.5.0 — 2026-07-28

bug fixes and peformance improvements

## Apps similar to BendCalc AI

| App | Rating | Price | Category |
| --- | --- | --- | --- |
| [BendPro: Conduit Bending](https://appshunter.io/ios/app/bendpro-conduit-bending/id6757287018) | 3.0 (2) | Free | Utilities |
| [Easy Bend: Conduit Bending](https://appshunter.io/ios/app/easy-bend-conduit-bending/id6761666115) | 4.4 (7) | Free | Utilities |
| [Conduit Mate: Pipe Bender](https://appshunter.io/ios/app/conduit-mate-pipe-bender/id6757356982) | — | Free | Utilities |
| [Conduit Fill & Bending Calc](https://appshunter.io/ios/app/conduit-fill-and-bending-calc/id6768075426) | 4.5 (4) | Free | Utilities |
| [Conduit Bending with Offset](https://appshunter.io/ios/app/conduit-bending-with-offset/id6787007384) | — | Free | Utilities |
| [Conduit Bender: Bend Calc](https://appshunter.io/ios/app/conduit-bender-bend-calc/id6786548483) | — | Free | Utilities |

## More apps by MMG Labs ltd

- [CueUp - Video Teleprompter](https://appshunter.io/ios/app/cueup-video-teleprompter/id6758866264)
- [Pennr: Fuel Finder UK & Petrol](https://appshunter.io/ios/app/pennr-fuel-finder-uk-and-petrol/id6760430119)
- [Kash: AI Cash Register & POS](https://appshunter.io/ios/app/kash-ai-cash-register-and-pos/id6760980709)
- [InkStencil: AI Tattoo Design](https://appshunter.io/ios/app/inkstencil-ai-tattoo-design/id6761027004)
- [Glazed: AI Nail Design](https://appshunter.io/ios/app/glazed-ai-nail-design/id6761081928)

All apps by MMG Labs ltd: https://appshunter.io/developer/1499277120

## Related topics

[conduit bending with offset](https://appshunter.io/ios/topics/conduit-bending-with-offset) · [conduit bending calculator](https://appshunter.io/ios/topics/conduit-bending-calculator) · [emt bender](https://appshunter.io/ios/topics/emt-bender) · [bendpocket conduit bender calc](https://appshunter.io/ios/topics/bendpocket-conduit-bender-calc) · [electrical conduit bender](https://appshunter.io/ios/topics/electrical-conduit-bender) · [3d conduit bending calc](https://appshunter.io/ios/topics/3d-conduit-bending-calc) · [free conduit bending](https://appshunter.io/ios/topics/free-conduit-bending)

---

*Data collected daily from the US App Store and indexed by [AppsHunter](https://appshunter.io/). User reviews are verbatim App Store reviews. Ratings, prices and chart positions refresh continuously; this snapshot is from 2026-10-05.*