# Bubble Level: Tilt & Angle — Slope, tilt & inclinometer

> Slope, tilt & inclinometer (iPhone/iPad app by Mario Sombria.)

- Source: https://appshunter.io/ios/app/bubble-level-tilt-and-angle/id6829533409 (this page in markdown: same URL + `.md`)
- Developer: [Mario Sombria](https://appshunter.io/developer/6829533411)
- Category: Utilities, Productivity
- Price: Free
- Age rating: 4+
- Requires: iOS 17.0 · 4 MB
- Languages: American English, French (France), German (Germany), Italian, Brazilian Portuguese, European Spanish
- Released: 2026-11-06
- Data updated: 2026-11-16

## What is Bubble Level?

Level turns your iPhone or iPad into a bubble level and an angle finder (clinometer). It is made for when one hand is busy and the phone is resting on the surface: put it down, read the slope and carry on.

No ads, no account, no connection and no permissions to accept.

Measure in the unit you need:
• Degrees, with one decimal.
• Percent slope (%), for ramps, drains and gutters.
• Millimeters per meter (mm/m), for leveling against a building reference.
• Inches per foot (in/ft), with two decimals.
Switch units with one tap, choose which ones to show in Settings; the app remembers your choice.

Three modes, chosen automatically:
• Flat: a 360° bubble for tables, countertops, washing machines or the floor.
• Horizontal and Vertical: a tube along the measured axis, for shelves, picture frames and walls.
The name of the mode is always shown as text on screen.

Set a target and save it:
• Set a target angle and the phone guides you with vibration or beeps, closer together as you approach, until you reach it.
• Save measurements with a name, set one as your target with a tap, and reorder or delete them.

Calibrate your phone in two steps:
• Corrects the sensor error of each resting side, without needing a level surface.
• Rest the phone against a stop and turn it half a turn on the table: a beep and a vibration tell you when, without looking at the screen.
• You can remove the calibration of a side and undo it.
• The app shows "Not calibrated" when the side it is resting on hasn't been calibrated.

Hold the reading and step back:
• One button holds the reading; "Hold when steady" does it by itself once the phone stops moving, with a beep and a vibration.
• While held, the bubble (or tube) turns gray, so it is not mistaken for a live reading.

Level without looking at the screen:
• When it gets level, the phone vibrates with two short pulses, and can beep if you turn that on; both are set in Settings.
• Choose the level margin: 0.2° for long shelves, 0.5° for general use or 1° for outdoors.

Designed to be accessible:
• Designed for VoiceOver: it tells you the slope with its value and its unit and, while you measure, which side is lower; every button and switch has a name.
• Vibration and beeps to calibrate, hold the reading and level without looking at the screen.
• Status in words, not just color: "Measuring…", "Stabilizing…", "Almost level" and "Level".
• Follows the system text size (Dynamic Type), even very large text, with good contrast in light and dark theme.

A tutorial the first time you open it:
• Short steps on top of the level, which keeps measuring. Replay it any time from Settings.

Built to read at a glance:
• Large digits.
• The screen stays on while you measure.
• A button to rotate the screen with your phone even if system rotation is locked.

Private by design:
• No ads.
• No account or sign-up.
• Works without Internet: the app sends nothing anywhere.
• Your settings, calibration and saved measurements stay on your phone, and you can delete them from Settings.

What it's for:
Hanging a picture or a shelf, assembling furniture, leveling a washing machine, a tripod or a camper van, checking the slope of a ramp, a drain or a gutter.

An honest note:
Level uses your phone's sensor, not a certified instrument, and accuracy depends on that sensor (calibrating helps). For work with strict tolerances use a professional level. If your device doesn't have the required sensor, the app tells you so.

Questions or ideas? Write to hola@crankgrid.app.

## Is Bubble Level safe?

Not enough ratings yet to assess Bubble Level.

## Is Bubble Level legit?

Bubble Level: Tilt & Angle has limited verification signals. The AppsHunter Legitimacy Score for Bubble Level is 58 out of 100 points across 7 verification signals from App Store and developer data.


## Version history (last 4 releases)

### 0.5.0 — 2026-11-15

• Now in French, German, Italian and Portuguese (Brazil and Portugal), as well as English and Spanish.
• Tidier Settings: the theme moves to “Appearance”, with its own screen.
• Other improvements and fixes.

### 0.4.1 — 2026-11-14

• Lighter tutorial: each step in one short sentence.
• The tutorial's “Level” highlight is now centered.
• Other improvements and fixes.

### 0.4.0 — 2026-11-08

• Foldables: half open, the screen splits at the hinge and the level makes use of each half.
• Phones with limited sensors: full six-face calibration and a more reliable "Level".
• Clearer Settings: each option explains what it does in its own row.
• With a target angle, the bubble no longer freezes and the guide no longer beeps nonstop.
• More comfortable tutorial with large text, and other fixes.

### 0.3.0 — 2026-11-06

No release notes.

## Related topics

[clinometer bubble level](https://appshunter.io/ios/topics/clinometer-bubble-level)

---

*Data collected daily from the US App Store and indexed by [AppsHunter](https://appshunter.io/). User reviews are verbatim App Store reviews. Ratings, prices and chart positions refresh continuously; this snapshot is from 2026-11-16.*
