# CNC Offsider: G-code & Feeds — Check each file before you cut

> Check each file before you cut (iPhone/iPad app by Nicholas BELL.)

- Source: https://appshunter.io/ios/app/cnc-offsider-g-code-and-feeds/id6820932497 (this page in markdown: same URL + `.md`)
- Developer: [Nicholas BELL](https://appshunter.io/developer/6820932499)
- Category: Utilities, Productivity
- Price: Free with in-app purchases
- Age rating: 4+
- Requires: iOS 16.4 · 62 MB
- Languages: American English
- Released: 2026-11-05
- Data updated: 2026-11-06

## What is CNC Offsider?

The pre-flight check for your CNC router. You design the cut; The Spindler checks the numbers.

CNC Offsider reads the G-code file you're about to run on your CNC and checks it against your bits, your material and your machine — before the bit touches the wood. It catches the expensive mistakes: a feed that will snap a small bit, a pass too deep for your machine, a plunge that burns, a job bigger than your bed, a stepover that chatters.
FILE CHECK
Pick the file your CAM software exported — VCarve, Aspire, Carbide Create, Fusion and most others write standard G-code — and get a verdict in seconds:
• Feed rate and chip load against your bit and material
• Depth per pass against your bit and your machine's rigidity
• Real stepover read from the toolpath itself, and the chatter risk that comes with it
• Plunge speed, Z travel, work area and spindle speed against your machine's limits
• The tool named in the file matched to the bit in your library
• Run time, energy use and running cost, resin volume for inlays and pours

LEARNS YOUR SHOP
• Pre-flight compares each file with your own history, so an unusual depth, feed or run time stands out
• Learns how you usually set up — where you zero X/Y and Z, how high your rapids clear — and flags a file that doesn't match
• Tell it how a job ran and it remembers what worked: proven settings for each bit in each material, and "this chattered last time" before you repeat it
• Enough good runs and it offers to tune its numbers to your machine. Nothing changes without your OK
• "What The Spindler knows" shows everything it has learned in one place

SHOP TOOLS
• CNC feeds & speeds calculator for pocketing, profiling, V-carving, drilling, 3D roughing and finishing
• Bit library — import your Vectric tool database — and 60+ woods, plastics and metals with sourced chip loads
• Machine profiles with rigidity, travel and spindle limits
• Cost & Pricing: material, bit wear, electricity, your time and overhead, priced from a checked file in one tap
• Cut log, maintenance reminders, LED strip estimates for signs

NO ACCOUNT NEEDED. WORKS OFFLINE.
Everything runs on your phone. Your G-code files are read on the device and never uploaded. An account is optional and only adds sync between your devices.

FREE AND PRO
Your first three File Checks are free and run in full, along with the calculator, libraries, machine setup, cut log, maintenance and backup. CNC Offsider Pro adds unlimited File Checks, the learning, sync across devices, Cost & Pricing and resin, energy and LED estimates — monthly or yearly, with a free trial.

Estimates from published manufacturer data and CNC Offsider's own model. Always start conservatively and stay with the machine.

Privacy: https://deckedoutdisplays.github.io/cncoffsider-site/privacy.html
Terms of use: https://www.apple.com/legal/internet-services/itunes/dev/stdeula/

## Pricing and in-app purchases

Base price: Free.

**Subscriptions**

| Subscription | Price | Period |
| --- | --- | --- |
| Pro Monthly | $5.99 | per month |
| Pro Yearly | $39.99 | per year |


## Is CNC Offsider safe?

Not enough ratings yet to assess CNC Offsider.

## Is CNC Offsider legit?

CNC Offsider: G-code & Feeds has limited verification signals. The AppsHunter Legitimacy Score for CNC Offsider is 50 out of 100 points across 7 verification signals from App Store and developer data.


## Version history (last 1 release)

### 1.0 — 2026-11-05

No release notes.

---

*Data collected daily from the US App Store and indexed by [AppsHunter](https://appshunter.io/). User reviews are verbatim App Store reviews. Ratings, prices and chart positions refresh continuously; this snapshot is from 2026-11-06.*
