# CNC Toolkit — Feeds, V-carve & shop log

> Feeds, V-carve & shop log (iPhone/iPad app by Nerd Alchemy LLC.)

- Source: https://appshunter.io/ios/app/cnc-toolkit/id6829531065 (this page in markdown: same URL + `.md`)
- Developer: [Nerd Alchemy LLC](https://appshunter.io/developer/927008025)
- Category: Utilities, Productivity
- Price: $9.99
- Age rating: 4+
- Requires: iOS 26.0 · 7 MB
- Languages: American English
- Released: 2026-11-02
- Data updated: 2026-11-06

## What is CNC Toolkit?

CNC Toolkit is a control panel for the hobby and small-shop CNC router. Load a bit from your rack, read the setup like a DRO, and get on with the cut.

It doesn't guess your chipload. You enter the numbers from your bit maker's chart once, per bit and per material, and every tool uses them.

CUTTING
• Feeds & speeds: RPM, feed rate and surface speed, either way round, inch or metric
• Chipload check: your feed and RPM against the range you saved for that bit
• Chip thinning: the feed for light side cuts, with an engagement diagram
• Stepover & stepdown, and ball-nose scallop height both ways

V-CARVING
• V-bit depth and width for any angle, flat tip or sharp
• V-carve inlay: where the plug seats, the glue gap and the board gap, drawn to scale

PLANNING
• Surfacing time and passes for spoilboards and slabs
• Job time from your CAM's path lengths, plunges, rapids and tool changes
• Sheet yield: parts per sheet and sheets per job, with the bit's width between parts
• Full-size printable templates: spoilboard hole grid, V-bit angle gauge, test-cut sheet

SHOP RECORDS
• My Bits: diameter, flutes, angle, max RPM and your chipload ranges
• Machines: travel, spindle range, rapid rate, run hours and maintenance due
• Job log with photos, and one tap to recall a job's settings

REFERENCE
• Bit types, with drawings: upcut, downcut, compression, O-flute, ball, tapered ball, V, surfacing and more
• G- and M-codes in plain words
• Tap drills from the percentage-of-thread formula, with the nearest inch, number, letter and metric drills
• Wood species density and hardness, and cutting notes for sheet goods, plastics, foam and aluminium
• Fraction calculator and converter, to 1/64 with the error in mm

Inches, fractions or millimetres throughout. Dark control-panel look, or light. Works offline. No account, no ads, no tracking.

Results are calculations from the numbers you enter, not cutting recommendations. Check them against your bit maker's data and make a test cut. Never run a bit above its rated speed.

## Is CNC Toolkit safe?

Not enough ratings yet to assess CNC Toolkit.

## Is CNC Toolkit legit?

CNC Toolkit appears legitimate, with a few gaps. The AppsHunter Legitimacy Score for CNC Toolkit is 75 out of 100 points across 7 verification signals from App Store and developer data.


## Version history (last 1 release)

### 1.0 — 2026-11-02

No release notes.

## More apps by Nerd Alchemy LLC

- [Lake Martin Voice](https://appshunter.io/ios/app/lake-martin-voice/id953304313)
- [Aikido Encyclopedia](https://appshunter.io/ios/app/aikido-encyclopedia/id1104990681)
- [Diamond Sports Trivia](https://appshunter.io/ios/app/diamond-sports-trivia/id1153777521)
- [SiteWrench](https://appshunter.io/ios/app/sitewrench/id6829261775)
- [Luthier Toolkit](https://appshunter.io/ios/app/luthier-toolkit/id6829345424)
- [Amp Tech Toolkit](https://appshunter.io/ios/app/amp-tech-toolkit/id6829353883)

All apps by Nerd Alchemy LLC: https://appshunter.io/developer/927008025

---

*Data collected daily from the US App Store and indexed by [AppsHunter](https://appshunter.io/). User reviews are verbatim App Store reviews. Ratings, prices and chart positions refresh continuously; this snapshot is from 2026-11-06.*