# ConXus > Remote boiler monitoring and control application for smart devices. (iPhone/iPad app by Lochinvar Corporation.) - Source: https://appshunter.io/ios/app/conxus/id891482782 (this page in markdown: same URL + `.md`) - Developer: [Lochinvar Corporation](https://appshunter.io/developer/891482785) - Category: Utilities - Price: Free - Rating: 2.54/5 from 26 App Store ratings · 14 written reviews indexed - Age rating: 4+ - Requires: iOS 17.6 · 19 MB - Languages: English - Released: 2014-08-26 - Data updated: 2026-07-07 - Monetization: free - User reviews in markdown: https://appshunter.io/ios/app/conxus/id891482782/reviews.md ## What is ConXus? From anywhere in the world, check operating conditions, receive status alerts and modify boiler parameters, using a smart device. From a single boiler to an 8-unit cascade system, check operating status or reprogram any boiler function. Wherever you are, you’ll be able to control set points, domestic hot water, reset curves, pump controls and more. Con-X-Us mobile connect will keep you in touch and in control. ## Key features - Remote boiler monitoring - Adjust boiler parameters - Receive status alerts - Control set points - Manage domestic hot water - Reprogram boiler functions ## Recent user reviews (10 of 14) All indexed reviews: https://appshunter.io/ios/app/conxus/id891482782/reviews.md ### 3/5 — Graph Feature Mod Suggestion *2026-03-15* Would be a useful feature to be able to select the start/stop date/time for the x-axis. It currently is set for a fixed start date of several weeks in the past. Be better if we could select the start date to be say 24 hours ago or even 1 hour ago so the plotted data would have more time resolution. Would also be more useful if the Lochinvar Boiler and this app could be synced to real (NTP) time. Right now time seems to be displayed based on Lochinvar Boiler time which is losing more than 30 minutes each day. ### 1/5 — Awful *2025-04-08* App crashes every time I hit “About.” It also doesn’t display any of the sensors like it should. It worked for a while and then all of a sudden stopped. All I get now is basic run state. ### 1/5 — Very disappointing *2025-01-15* The app only works (for me) to check status of the boilers. I had two faulted out recently on LWCO (test not reset). Unable to do any about it. The graphs are useless and seem to pick arbitrary dates and parameters. They appear non-adjustable. Having data from 5 weeks ago doesn’t help much. The ranges are really too wide to be of use. A example is on a temperature graph it shows a range of -40F to 240F over a two week period. Lochinvar can do better. The boilers are fine units and this app is far below that standard. It’s obviously a low priority for them to improve this. ### 1/5 — Does not seem to work on Apple iOS *2024-10-02* I have follow instructions and videos on how to register and link to app. Got boiler connected via WiFi and it’s showing solid connection. Registered boiler . Issue is that once logged into app I don’t see any current readings at all as if the unit is not connected. Tried to re-register unit but that failed. There is no way to log into web based site account to delete and re-register to see if that corrects issue. Have read that the app does not work well for Apple devices. Just disappointing that I cannot get this online for remote diagnostics. ### 2/5 — missing basic features *2024-01-30, version 3.3.3* there is no option to remove boilers from the list and re enter them . there is a malfunction where the boilers list on the app as OFF . they are on . i could delete them and re enter them but no such option . so tech support calls me back 2 hours after i have left the site . repeat on loop . customer complaining about a feature we sold them . no support . hours spent $$ . Fail . ### 2/5 — Registration issues, landscape lock, & naming *2022-03-18* Couldn’t the first two boilers to register, then without changing an info enter in my second armor registered all the sudden and then the first did as well. Having same issue with another pair but the first still won’t register and then another outta a third pair that won’t register as well. Also like others said it locks you into landscape. Lastly once registered you can’t rename. I named a pair backwards by mistake trying to register them and can’t rename them to correct my mistake. ### 2/5 — Maybe update the app? *2021-12-18* 100s of thousands in condensing boilers & HWHs with “remote capability” and this is what they have to offer? Needs significant work in every aspect. Why even offer and app? ### 1/5 — Very disappointing *2021-10-18, version 3.3.3* The app only works (for me) to check status of the boilers. I had two faulted out recently on LWCO (test not reset). Unable to do any about it. The graphs are useless and seem to pick arbitrary dates and parameters. They appear non-adjustable. Having data from 5 weeks ago doesn’t help much. The ranges are really too wide to be of use. A example is on a temperature graph it shows a range of -40F to 240F over a two week period. Lochinvar can do better. The boilers are fine units and this app is far below that standard. It’s obviously a low priority for them to improve this. ### 4/5 — A couple odd probs but overall good *2021-01-11* Yes, like others reviewers say, there is a landscape lock problem that screws up your phone on occasion, and there is a problem where if you access your boiler via local net then it won’t show up later remote over internet unless you close the app and restart, and vice versa. Also, I have a strange problem where my boiler shows system return temp at the boiler, but the app always shows zero!!! However the app, at the end of the day is still really useful, just has a few bugs and also one of the poorest UI’s I’ve experienced. Very difficult to find where things are hidden. ### 1/5 — Barely functional *2021-01-02* The app requires multiple logouts/logins for the registered devices to populate in the account. The application is not fit for purpose for assisting in the troubleshooting process remotely since the boiler diagnostic information can only be viewed by the home owner’s ConXus account, and the service provider cannot simultaneously register a device to their account for remote diagnosis. The app could be so much more than it is. The historical graphs don’t work either. ## Frequently asked questions about ConXus ### What can I control with ConXus? With ConXus, you can control set points, domestic hot water, reset curves, pump controls, and reprogram any boiler function. It allows for comprehensive management of your heating system remotely. ### Does ConXus work with multiple boilers? Yes, ConXus supports systems ranging from a single boiler to an 8-unit cascade system. You can check operating status or reprogram any boiler function within these configurations. ### What devices are supported by ConXus? ConXus is available for iPhone, iPad, and iPod devices. It is designed to be accessible on various Apple smart devices. ### How often is ConXus updated? The latest version of ConXus, 3.4.0, was last updated on September 3, 2024. This indicates a relatively active development cycle for the application. ### What is the age rating for ConXus? ConXus has an age rating of 4+. This suggests it is suitable for a wide range of users and does not contain mature content. ### Is ConXus free to download and use? Yes, ConXus is available for free. There are no upfront costs to download or use the basic functionalities of the application. ### What is the user rating for ConXus? ConXus has an average rating of 2.6 stars from 24 ratings. This indicates that while some users find it useful, there may be areas for improvement based on user feedback. ### Does ConXus have ads? No, ConXus does not contain advertisements. As it is a free application without ads, users can expect an uninterrupted experience. ## Version history (last 5 releases) ### 3.4.1 — 2026-04-09 General stability and compatibility improvements to support the latest iOS release Included iOS 17 compatibility updates needed for current third-party dependencies ### 3.4.0 — 2024-09-03 New Features: * Added support for the Hellcat Platform. Bug Fixes: * Fixed an issue that prevented the app from connecting to the appliance. * Fixed an issue causing the app to crash under certain conditions. ### 3.3.3 — 2021-02-24 Added Model Support for KNIGHT XL II and ARMOR II Correct ARMOR WH model name Fixed an issue where sometimes the device list would not appear upon login ### 3.3.2 — 2021-02-23 Enhanced outdoor reset graph and added SH setpoint line Updated Cedar boiler parameter ranges Added additional error codes Added model support for Galaxie II Updated Galaxie model names Fixed the anti-cycle diff temp max value Fixed the tank diff maximum for Galaxie II Fixed an issue where 190°F parameter values were triggering an erroneous push Fixed an issue where HW boiler offset and diff values were used instead of HW tank offset and diff Removed deprecated content in iOS Updated third party libraries ### 3.3.1 — 2020-06-02 * Add support for some new Shield models. * Fixes newly-registered devices not appearing in the device list. * Fixes an issue where the app may crash while scanning a QR code for the first time. ## Apps similar to ConXus | App | Rating | Price | Category | | --- | --- | --- | --- | | [NTI net](https://appshunter.io/ios/app/nti-net/id1575731502) | 4.5 (69) | Free | Utilities | | [UEi Apps](https://appshunter.io/ios/app/uei-apps/id1332548961) | 2.7 (6) | Free | Utilities | | [TurboTool®](https://appshunter.io/ios/app/turbotool/id1006539543) | 4.6 (16) | Free | Utilities | | [Nexa Platform](https://appshunter.io/ios/app/nexa-platform/id6523428563) | 5.0 (12) | Free | Utilities | | [Taco Control](https://appshunter.io/ios/app/taco-control/id6443923649) | 3.0 (2) | Free | Utilities | | [ICM Omni](https://appshunter.io/ios/app/icm-omni/id1668830205) | 5.0 (1) | Free | Utilities | ## Related topics [lochinvar](https://appshunter.io/ios/topics/lochinvar) --- *Data collected daily from the US App Store and indexed by [AppsHunter](https://appshunter.io/). User reviews are verbatim App Store reviews. Ratings, prices and chart positions refresh continuously; this snapshot is from 2026-07-07.*