# Crown Cut: Miter & Bevel — Crown molding, cut flat

> Crown molding, cut flat (iPhone/iPad app by Maksim Berest.)

- Source: https://appshunter.io/ios/app/crown-cut-miter-and-bevel/id6831605778 (this page in markdown: same URL + `.md`)
- Developer: [Maksim Berest](https://appshunter.io/developer/6831605780)
- Category: Utilities, Productivity
- Price: Free
- Rating: 5.00/5 from 2 App Store ratings
- Age rating: 4+
- Requires: iOS 17.0 · 1 MB
- Languages: American English, Russian
- Released: 2026-11-06
- Data updated: 2026-11-10

## What is Crown Cut?

Get a clear setup for cutting crown molding flat on a compound miter saw.

Enter the angle between your walls and choose a 38° or 45° spring angle, or enter the measured angle of your own molding. Crown Cut calculates the miter and bevel settings and shows the directions from the operator's position.

SEE EACH STEP
• Top and front saw views show how to turn the table and tilt the blade.
• Choose inside or outside corners and the left or right piece.
• See which molding edge goes against the fence and which side to keep.
• For a left-bevel-only saw, see when to rotate the molding 180° on the table while keeping it face up.

MEASURE FROM THE RIGHT POINT
• Select whether the other end is square, inside or outside.
• See the existing cut, the new cut, and the wall-contact edge used for length L.
• Follow long-point and short-point instructions for every end combination.

SAVE YOUR SAW AND ROOM
• Add named saw profiles with separate left and right miter and bevel limits.
• Receive a notice when a calculated angle exceeds your saved limits.
• Use a rectangular or L-shaped room plan, record individual corner angles, mark pieces done, and share a cut list.
• Use the large at-the-saw view with the screen kept awake while it is open.

Works offline. No account, advertising, subscription or in-app purchase. Room measurements and saw profiles are stored on your device. English and Russian interfaces, with automatic iPhone language selection or an in-app choice.

The calculation assumes matching molding on both walls, equal spring angles, plumb walls and a level ceiling. Room plans and saw drawings are schematic. The app checks angle limits; cutting width and height depend on your saw. Verify your setup with the saw manual and make a test joint with two scraps first.

Crown Cut is an independent app and is not affiliated with or endorsed by any saw manufacturer.

## Is Crown Cut safe?

Not enough ratings yet to assess Crown Cut.

## Is Crown Cut legit?

Crown Cut: Miter & Bevel has limited verification signals. The AppsHunter Legitimacy Score for Crown Cut is 58 out of 100 points across 7 verification signals from App Store and developer data.


## Version history (last 1 release)

### 1.5 — 2026-11-07

No release notes.

---

*Data collected daily from the US App Store and indexed by [AppsHunter](https://appshunter.io/). User reviews are verbatim App Store reviews. Ratings, prices and chart positions refresh continuously; this snapshot is from 2026-11-10.*
