# FasLink X — user reviews > 57 indexed App Store user reviews of FasLink X by 亮 侯, rated 2.81/5 from 103 ratings. - Source: https://appshunter.io/ios/app/faslink-x/id1521588286/reviews - App overview in markdown: https://appshunter.io/ios/app/faslink-x/id1521588286.md - Rating breakdown: 5★ 35 · 4★ 9 · 3★ 6 · 2★ 7 · 1★ 46 ## What do users think of FasLink X? Overall sentiment: negative **Pros** - 👍 Easy to use software - 👍 Connects to iPhone - 👍 Works for basic needs - 👍 Solved problems quickly - 👍 Free app - 👍 Works with Faslink M2 **Cons** - 🐛 Does not read all cars - 🐛 Not as smart as advertised - 🐛 Live data nonexistent - 🐛 Cannot switch measurements - 🐛 Does not display error codes - 🐛 Menu in Chinese - 🐛 Does not connect via Bluetooth - 🐛 Ineffective connection - 🐛 No data coming through - 🐛 Protocol detecting forever - 🐛 Steals personal data - 🐛 Only reads codes - 🐛 Crashing in live mode - 🐛 Does not work - 🐛 Options not allowed in many vehicles - 🐛 Horrible instructions - 🐛 Cannot connect to device - 🐛 Waste of money and time - 🐛 Some information not read - 🐛 Cannot read SRS/TPMS - 🐛 Cannot read VIN - 🐛 Cannot explain P codes - 🐛 No response from customer service - 🐛 Does not support older vehicles - 🐛 Does not recognize VIN - 🐛 Shows no faults - 🐛 Locks up after connecting - 🐛 Does not display live readings - 🐛 VIN numbers don't work - 🐛 Car models/makes don't work - 🐛 No Bluetooth PIN code - 🐛 Bluetooth no longer connects - 🐛 App does not connect via Bluetooth - 🐛 Does not support Wi-Fi - 🐛 Shows up under Wi-Fi, not Bluetooth - 🐛 Cannot select Wi-Fi or Bluetooth - 🐛 Won't get past loading phase - 🐛 Impossible to use - 🐛 Vehicle options not alphabetical - 🐛 Ignition must be on error - 🐛 No listing for some car models - 🐛 Ignition on but not recognized - 🐛 Only battery test works - 🐛 Spinning looking for hardware - 🐛 Does not work with older iPhones - 🐛 Not compatible with iPhone 11 - 🐛 Fake website/stock images **Commonly reported bugs** - Live data is nonexistent - Cannot switch between metric and imperial measurements - Menu is in Chinese - Does not connect via Bluetooth - Connection is ineffective - No data coming through - Stuck on 'Protocol Detecting...' - Does not display error codes - Crashing every time in live mode - Does not recognize VIN - Shows no faults even when dashboard does - App locks up after connecting - Does not display live readings - Some VIN numbers don't work - Some car models and makes don't work - No Bluetooth PIN code - Bluetooth no longer connects to network - App does not connect via Bluetooth - App does not support Wi-Fi - Device shows up under Wi-Fi, not Bluetooth - No option to select Wi-Fi or Bluetooth - Won't get past loading phase - Vehicle options are not in alphabetical order - Ignition must be on error when car is running - No listing for some car models - Ignition on but not recognized - Only battery test works - Sits there spinning looking for hardware but says connected - Does not work with older iPhone SE - Not compatible with iPhone 11 - Website links don't work, grammatical errors, fake staff photos, WhatsApp number **Most requested features** - Bidirectional scanner - Updated to 2026 - Boost gauge feature - Switch between metric and imperial measurements - Technician service bulletins - Recalls - Graphs and gauges - ODBII System Selection Plus Automatic Selection - Wi-Fi support - Arabic language support - Option to select Wi-Fi or Bluetooth ## Newest reviews (13 of 57) ### 3/5 — Not best Not worst if it’s free it’s worth it *2026-04-18, version 1.1.3* The scanner tool dosent do everything they say it does and can’t read all cars or as smart as it makes it sound try to find a scanner that’s bi direction and updated toc2026 ### 3/5 — Works kinda *2025-12-03, version 1.1.3* Every time I go to look up technician service bulletins or recalls and half the time live data is nonexistent like to see some improvement ### 2/5 — Scanner/App *2025-08-05, version 1.1.3* Scanner works GREAT the app is okay my only complaint is you can’t switch between metric and imperial measurements when looking at live data all temps are displayed as Celsius and can’t switch to Fahrenheit ### 1/5 — Will not work *2024-06-25, version 1.1.3* Will not work, cannot connect to car ecu, rubbish ### 1/5 — NO TOYOTA in the list of vehicles 🙈. *2024-06-06, version 1.1.3* Crashing every time I try to use the live mode… ### 1/5 — No good *2024-04-14, version 1.1.3* Doesn’t work ### 1/5 — Piece of trash *2024-03-15, version 1.1.3* I waste my money. This device is a piece of trash. Options are not allowed in many vehicles. Don’t buy this garbage. ### 1/5 — Doesn’t work at all. *2024-03-08, version 1.1.3* First, horrible instructions one has to search to find. Then, once found, the device cannot be found by the phone. When I try manually, I tap and tap when it pops up, but still cannot connect. If I cannot use it, it is worthless. ### 1/5 — Rubbish *2024-01-30, version 1.1.3* Absolutely a waste of money and time ### 1/5 — Marginally useful *2023-12-19* You only have this app because you bought a JDiag FasLink OBDII reader and have discovered that the original app doesn’t exist anymore. The problem is this new gen app is about worthless. Yeah you can connect to the reader and read some OBD codes. But that is about it. Used to be able to read SRS, not anymore. Used to be able to read and manipulate TPMS, not anymore. It wants to be able to read your vehicle’s VIN and tell you all sorts of wonderful things. It just can’t. It wants to be able to explain what those cryptic P codes are you were able to pull up are, but just can’t. The app seems like a skeleton, all bones no flesh. Of course, you DID get this because you wanted to give that little lump of plastic one more chance at life. Unfortunately, this app is one big flatline with not very much to offer. So go on, don’t feel guilty for tossing it into the rubbish bin of cheap Chinese junk you wasted your money on. Next time buy the brand name and leave cheap Chinese junk for the Chinese. **Developer response:** JDiag Faslink OBD2 hardware is no longer support! ### 2/5 — Marginally useful *2023-11-27* You only have this app because you bought a JDiag FasLink OBDII reader and have discovered that the original app doesn’t exist anymore. The problem is this new gen app is about worthless. Yeah you can connect to the reader and read some OBD codes. But that is about it. Used to be able to read SRS, not anymore. Used to be able to read and manipulate TPMS, not anymore. It wants to be able to read your vehicle’s VIN and tell you all sorts of wonderful things. It just can’t. It wants to be able to explain what those cryptic P codes are you were able to pull up are, but just can’t. The app seems like a skeleton, all bones no flesh. Of course, you DID get this because you wanted to give that little lump of plastic one more chance at life. Unfortunately, this app is one big flatline with not very much to offer. So go on, don’t feel guilty for tossing it into the rubbish bin of cheap Chinese junk you wasted your money on. Next time buy the brand name and leave cheap Chinese junk for the Chinese. **Developer response:** JDiag Faslink OBD2 hardware is no longer support! ### 2/5 — Code retrieval and customer service *2023-11-02, version 1.1.3* I have the Jdiag Bluetooth device, initially used the Nezscan app and then it changed to FasLink. The device seems to do a good job of codes retrieval but I had an issue with the app stopped showing my tips and troubleshooting info, and fails to find make and model if scanned or enter VIN. Reached out to customer service via the app feedback and got no responses. ### 1/5 — Terrible App *2023-10-05, version 1.1.3* Doesn’t support my 2002 Ford Escape V6, FWD. ## Most critical reviews (10 lowest-rated) ### 1/5 — Rubbish *2026-07-07, version 1.1.3* Please don’t waste your money ### 1/5 — Dont waste your cash *2025-07-31, version 1.1.3* Other than seeing some basic live info, such as Engine RPM and temp etc this is pretty useless. Doesnt display any error codes. Cheap nonsense thats just a waste of cash. Tried on Mitsubishi, BMW and VW Golf. ### 1/5 — 0 errors. While my dash display errors *2025-05-22, version 1.1.3* How comes that my car shows me issues and your app none. Reads everything except main thing. Another trash ### 1/5 — Malísimo *2025-02-17, version 1.1.3* No sirve el menú está en chino. No se conecta por Bluetooth. Ni que intentes mil veces. No sirve mala calidad. No lo recomiendo. No poerdas tu tiempo. ### 1/5 — Unusable mark *2024-12-28, version 1.1.3* I connected to car and made device connection with 40 wait for “protocol” and indefinite waiting for “loading” Totally ineffective. ### 1/5 — No data *2024-12-21, version 1.1.3* OBDII scanner bought on Amazon. Scan fails 0 data coming through. Wasted money. ### 1/5 — Doesn’t Work *2024-12-15, version 1.1.3* “Connects” to dongle no problem but just says “Protocol Detecting…” for forever. Never fully connects. I’ve tried it in 3 different vehicles and all the same. ### 1/5 — Un fraude roba los datos personales *2024-10-05, version 1.1.3* Este producto es un fraude te roba los datos personales, mejor regrenlo a su proveedor ### 1/5 — Doesn’t do anything but read codes *2024-10-01, version 1.1.3* I ordered this on the assumption that i would b able to live screen what’s going on with fuel pressure cam timing all the above and doesn’t do anything for a 96 Chevy can only read codes ### 1/5 — This thing is junk *2024-08-29, version 1.1.3* I recommend not buying none of these from this company. These things are junk. They don’t work when you call them. They give you a harassing time about how to fix it after an hour and a half. They still couldn’t fix it over the phone so don’t buy it. ## Most praised reviews (10 highest-rated) ### 5/5 — I'm cool with it *2026-05-25, version 1.1.3* I been using it some atleast 4 years now and it works perfect for what I need it for. The codes are true to the devices knowledge. It found my problems on my 08 gmc Yukon saying #5 coil was bad and after replacing it fired perfect. And it also is showing other codes that I know for a fact need changing but yea ish work good. Also I used It in my brother 2025 Honda and helped others figure their problem out ### 5/5 — Software is super easy to use *2026-03-24, version 1.1.3* Was able to connect my OBD2 reader to my iPhone with this app without any drama. The app seems to do what we need and it is very simple to use. ### 5/5 — Goood *2025-09-11, version 1.1.3* Good ### 5/5 — Faslink x *2024-09-21, version 1.1.3* So I was wandering if anyone know if theirs a boost gauge feature? ### 5/5 — Works for Me *2023-12-10, version 1.1.3* For what I have used it for, it works great with my FasLink M2. I’ve seen negative reviews, but for advanced features that I haven’t tried to use, so I can’t comment on those. For me, so far so good. ### 5/5 — Did the job and did it well *2023-05-23, version 1.1.3* I purchase an OBDII that link to this software. It connected to the device within 20 seconds and it fixed every warning light that was on my car for the past three months. I drive a 2009 I-tech Prius For the past three months I’ve only been able to drive it using engine and not the battery system. I hooked this device up and cleared all the warning systems, and now my car is running as good as it can for a vehicle that’s over 10 years old, and almost never serviced because I can’t afford to service it. The app allowed me to clear all warnings, it allowed my cruise control to work again which had been disabled and it works fine and safe. I thought I would have to spend a fortune on an app that will allow me to clear all the warnings or do a costly service, which I cannot afford. But this app for no extra cost as it was 100% free I just had to make sure I had a compatible device which cost me something like $12 AUD. I greatly appreciate that there are still apps out there on the Apple Store which do not have hidden costs like this one which is amazing as it was 100% free and work perfect. Thank you ### 5/5 — Perfect apps for i phone *2021-12-17, version 1.1.3* This apps solve my problem in just 5 second. Thank to you guys … ### 5/5 — New live gauge *2021-09-11, version 1.1.0* Would be awesome if you had an update to put a boost gauge on the screen! Love the app otherwise ### 4/5 — If you have a Jdiag M2 you need this app *2024-04-25, version 1.1.3* Since this is the replacement app to use if you have a Jdiag faslink M2 ### 4/5 — Scanner works great *2023-12-27, version 1.1.3* The scanner works great in my opinion I have fault codes that are from different car that are saved in saved fault codes no option to get rid of them I diagnosed my aunts car reset the car with the app and it ran great it detected a misfire only problem in my oppinion is some information doesn’t read --- *Data collected daily from the US App Store and indexed by [AppsHunter](https://appshunter.io/). User reviews are verbatim App Store reviews. Ratings, prices and chart positions refresh continuously; this snapshot is from 2026-08-21.*