# FT Ham – FT8/FT4 transceiver — Decode & send FT8/FT4 signals > Mobile FT8/FT4 decoder and transmitter for amateur radio operators. (iPhone/iPad app by PABLO TURRION SAN PEDRO.) - Source: https://appshunter.io/ios/app/ft-ham-ft8ft4-transceiver/id6755367558 (this page in markdown: same URL + `.md`) - Developer: [PABLO TURRION SAN PEDRO](https://appshunter.io/developer/1853443733) - Category: Utilities - Price: Free with in-app purchases - Rating: 4.67/5 from 3 App Store ratings · 3 written reviews indexed - Age rating: 4+ - Requires: iOS 16.6 · 17 MB - Languages: English, French, German, Italian, Spanish - Released: 2026-01-29 - Data updated: 2026-08-12 - Monetization: free with in-app purchases - User reviews in markdown: https://appshunter.io/ios/app/ft-ham-ft8ft4-transceiver/id6755367558/reviews.md ## What is FT Ham? FT Ham – FT8/FT4 Decoder & Audio Transmitter for Amateur Radio FT Ham puts a complete FT8/FT4 decoder and audio encoder/transmitter in your pocket. Decode, reply, and log QSOs directly from your iPhone — all in real time, fully offline. What the app does for you: - Live Waterfall: frequency vs time spectrogram with color intensity and vertical labels for each decoded signal. - Real-time Decoding: receive FT8 and FT4 audio via microphone or connected audio interface and see callsigns, reports, and SNR instantly. - Transmit (Encode & Play): generate FT8/FT4 audio for CQ, reports, RRR, and 73, aligned to correct UTC slots and played through speaker or radio interface. - Auto QSO Sequencing: detects CQ, prepares replies, respects UTC timing and even/odd cycles, retries if needed, and can complete QSOs automatically. - Manual Control Always Available: full manual message selection and intervention at any point. - Predefined Messages & Composer: CQ, DX→ME, reports, RRR, and 73 — automatically filled with your callsign and locator, fully customizable. - Logbook & ADIF Export: automatically log completed QSOs and export to standard ADIF for external logging software. - Contact Map: visualize logged QSOs and geographic coverage in a single view. Privacy & Safety: - All decoding and signal processing runs entirely on your device. No internet connection required. - FT Ham does not collect or share personal data. All settings and logs remain local on your device. - Audio output may be connected to external radios; always comply with local amateur radio regulations. - Payments are handled by Apple or third-party services; FT Ham never receives payment details. Legal & Licenses: - FT Ham code is released under the MIT License. - Third-party library licenses are included in-app. ## Key features - Real-time FT8/FT4 decoding - Offline audio transmission - Automatic QSO sequencing - Live waterfall display - Integrated logbook with ADIF export - Customizable message composer ## Pricing and in-app purchases Base price: Free. **One-time purchases** | Purchase | Price | Type | | --- | --- | --- | | FT Ham premium access | $1.99 | one-time | | Donation of 0.99 € | $0.99 | one-time | | Donation of 2,99 € | $2.99 | one-time | | Donation of 4,99 € | $3.99 | one-time | ## Recent user reviews (3 of 3) All indexed reviews: https://appshunter.io/ios/app/ft-ham-ft8ft4-transceiver/id6755367558/reviews.md ### 5/5 — Hey, cool! *2026-03-11* Can’t wait to try this on my iphone with a ht on vox. I could also see this as a great training tool for new users. You could use speakers and two devices for tests. No RF transmit would allow you to figure out the software and make mistakes without violating FCC rules. Great idea. Thank you for putting it together. ### 4/5 — First impressions it’s more awkward but more powerful than iftx *2026-03-06* Just found and stumbled on this today. Had been testing iftx now testing this against it seems to be much better app in ways and has its hurdles as well. But first impression is this will be my goto app. Time will tell. Further review pending. **Developer response:** Thanks a lot for your feedback! I’d love to hear any suggestions or improvements. You can reach me through the feedback button in the app or by email at ftham@turrion.dev. Thanks! ### 5/5 — Very nice new app Pablo! *2026-02-02* The app is working great on my iPad while hooked to an Icom 7300 for decoding via USB connection from my Lightning connector. Is CAT Control available via USB connection? Thank you Pablo!! **Developer response:** Thanks a lot for the positive feedback! CAT support is something that I am assessing how to integrate. Hopefully it will be available soon. Thanks again! ## Frequently asked questions about FT Ham ### Does FT Ham have ads? FT Ham is ad-free, allowing for an uninterrupted user experience. The app is free to download and use, with optional in-app purchases for enhanced functionality. ### How does FT Ham handle privacy? FT Ham prioritizes user privacy by running all decoding and signal processing entirely on your device. No internet connection is required for core functions, and the app does not collect or share personal data. ### What amateur radio modes does FT Ham support? FT Ham specifically supports the FT8 and FT4 digital modes, which are popular for weak-signal communication in amateur radio. ### Can I use FT Ham offline? Yes, FT Ham is designed to function fully offline. Decoding, replying, and logging QSOs can all be done without an internet connection, making it ideal for mobile use. ### What is the rating for FT Ham? FT Ham has a strong user rating of 4.7 stars based on 3 reviews, indicating a high level of user satisfaction. ### How frequently is FT Ham updated? The latest version of FT Ham is 1.2.5, which was released on March 16, 2026. Updates are released periodically to improve functionality and address any issues. ### What devices is FT Ham compatible with? FT Ham is available for both iPhone and iPad, offering a versatile experience for Apple users. ### Can FT Ham automatically log my QSOs? Yes, FT Ham automatically logs completed QSOs and provides an ADIF export option. This allows for seamless integration with external logging software. ## Version history (last 5 releases) ### 1.2.6 — 2026-04-01 What's New in 1.2.6 • Custom frequency picker — choose your preferred frequency directly from the app. • Reply is now available once a caller has been decoded. • Frequency is now recorded in your logbook entries. • Bug Fixes & Improvements - Fixed an issue that hid the tab bar while in map view. - Corrected incorrect frequency values shown in some cases. - General bugfixes What's new in 1.2.5? • CQ modifiers and grid location improvements - Auto locator / GPS toggle - Added toggle to include CQ in the grid - Fixed identification of CQ modifiers • Improved swipe to reply behavior What's new in 1.2.4? • Improved events reporting, translation • Fixed a bug when exporting to ADIF and added frequency to the ADIF file • Fixed bug when going to background What's new in 1.2.3? • Improved performance and reduced battery consumption What's new in 1.2.0? • New Features - Contacts Management Improved handling and integration of contacts within the application. - Country Display in Logbook The Logbook now display the country associated with each callsign for easier identification. - Callsign Location Detection The app can now infer and show approximate location based on callsign prefix. • Improvements - Map Controls Added options to enable or disable specific map elements for better customization. - AutoCQ Smart Behavior AutoCQ will not call for CQ when de DX is already in the list of QSO - Dynamic Log File Naming Log files now include timestamps (e.g., `FT_HAM_Log_YYYYMMDD_HHMMSS`) to avoid overwriting and make log organization easier. - Log Export Enhancements - Incremental export support. - Ability to export only new logs. - Option to select a specific date range instead of exporting the full history. • Bug Fixes - Several general bugfixes to improve usability and performance - Auto TX and Logging (Interleaved QSO Issue) Fixed an issue where interleaved QSOs could produce incorrect “invalid” entries in the Sent and Received log fields when reports were not received in a simple 1-to-1 exchange sequence. - Callsign Switching Logic Fixed a bug where the application could continue transmitting to the previous station instead of switching to the new target callsign after receiving a signal report. ### 1.2.5 — 2026-03-16 What's new in 1.2.5? - CQ modifiers and grid location improvements - Auto locator / GPS toggle - Added toggle to include CQ in the grid - Fixed identification of CQ modifiers - Improved swipe to reply behavior What's new in 1.2.4? - Improved events reporting, translation - Fixed a bug when exporting to ADIF and added frequency to the ADIF file - Fixed bug when going to background What's new in 1.2.3? - Improved performance and reduced battery consumption What's new in 1.2.0? *** New Features - Contacts Management Improved handling and integration of contacts within the application. - Country Display in Logbook The Logbook now display the country associated with each callsign for easier identification. - Callsign Location Detection The app can now infer and show approximate location based on callsign prefix. *** Improvements - Map Controls Added options to enable or disable specific map elements for better customization. - AutoCQ Smart Behavior AutoCQ will not call for CQ when de DX is already in the list of QSO - Dynamic Log File Naming Log files now include timestamps (e.g., `FT_HAM_Log_YYYYMMDD_HHMMSS`) to avoid overwriting and make log organization easier. - Log Export Enhancements - Incremental export support. - Ability to export only new logs. - Option to select a specific date range instead of exporting the full history. *** Bug Fixes - Several general bugfixes to improve usability and performance - Auto TX and Logging (Interleaved QSO Issue) Fixed an issue where interleaved QSOs could produce incorrect “invalid” entries in the Sent and Received log fields when reports were not received in a simple 1-to-1 exchange sequence. - Callsign Switching Logic Fixed a bug where the application could continue transmitting to the previous station instead of switching to the new target callsign after receiving a signal report. ### 1.2.4 — 2026-03-09 What's new in 1.2.4? - Improved events reporting, translation - Fixed a bug when exporting to ADIF and added frequency to the ADIF file - Fixed bug when going to background What's new in 1.2.3? - Improved performance and reduced battery consumption What's new in 1.2.0? *** New Features - Contacts Management Improved handling and integration of contacts within the application. - Country Display in Logbook The Logbook now display the country associated with each callsign for easier identification. - Callsign Location Detection The app can now infer and show approximate location based on callsign prefix. *** Improvements - Map Controls Added options to enable or disable specific map elements for better customization. - AutoCQ Smart Behavior AutoCQ will not call for CQ when de DX is already in the list of QSO - Dynamic Log File Naming Log files now include timestamps (e.g., `FT_HAM_Log_YYYYMMDD_HHMMSS`) to avoid overwriting and make log organization easier. - Log Export Enhancements - Incremental export support. - Ability to export only new logs. - Option to select a specific date range instead of exporting the full history. *** Bug Fixes - Several general bugfixes to improve usability and performance - Auto TX and Logging (Interleaved QSO Issue) Fixed an issue where interleaved QSOs could produce incorrect “invalid” entries in the Sent and Received log fields when reports were not received in a simple 1-to-1 exchange sequence. - Callsign Switching Logic Fixed a bug where the application could continue transmitting to the previous station instead of switching to the new target callsign after receiving a signal report. ### 1.2.3 — 2026-03-02 What's new in 1.2.3? - Improved performance and reduced battery consumption What's new in 1.2.0? *** New Features - Contacts Management Improved handling and integration of contacts within the application. - Country Display in Logbook The Logbook now display the country associated with each callsign for easier identification. - Callsign Location Detection The app can now infer and show approximate location based on callsign prefix. *** Improvements - Map Controls Added options to enable or disable specific map elements for better customization. - AutoCQ Smart Behavior AutoCQ will not call for CQ when de DX is already in the list of QSO - Dynamic Log File Naming Log files now include timestamps (e.g., `FT_HAM_Log_YYYYMMDD_HHMMSS`) to avoid overwriting and make log organization easier. - Log Export Enhancements - Incremental export support. - Ability to export only new logs. - Option to select a specific date range instead of exporting the full history. *** Bug Fixes - Several general bugfixes to improve usability and performance - Auto TX and Logging (Interleaved QSO Issue) Fixed an issue where interleaved QSOs could produce incorrect “invalid” entries in the Sent and Received log fields when reports were not received in a simple 1-to-1 exchange sequence. - Callsign Switching Logic Fixed a bug where the application could continue transmitting to the previous station instead of switching to the new target callsign after receiving a signal report. ### 1.2.2 — 2026-02-25 What's new? *** New Features - Contacts Management Improved handling and integration of contacts within the application. - Country Display in Logbook The Logbook now display the country associated with each callsign for easier identification. - Callsign Location Detection The app can now infer and show approximate location based on callsign prefix. *** Improvements - Map Controls Added options to enable or disable specific map elements for better customization. - AutoCQ Smart Behavior AutoCQ will not call for CQ when de DX is already in the list of QSO - Dynamic Log File Naming Log files now include timestamps (e.g., `FT_HAM_Log_YYYYMMDD_HHMMSS`) to avoid overwriting and make log organization easier. - Log Export Enhancements - Incremental export support. - Ability to export only new logs. - Option to select a specific date range instead of exporting the full history. *** Bug Fixes - Several general bugfixes to improve usability and performance - Auto TX and Logging (Interleaved QSO Issue) Fixed an issue where interleaved QSOs could produce incorrect “invalid” entries in the Sent and Received log fields when reports were not received in a simple 1-to-1 exchange sequence. - Callsign Switching Logic Fixed a bug where the application could continue transmitting to the previous station instead of switching to the new target callsign after receiving a signal report. ## Apps similar to FT Ham | App | Rating | Price | Category | | --- | --- | --- | --- | | [SimpleSSTV](https://appshunter.io/ios/app/simplesstv/id6756872709) | 3.7 (3) | $0.99 | Utilities | | [HamChat: Morse Decoder](https://appshunter.io/ios/app/hamchat-morse-decoder/id6759712691) | — | Free | Utilities | | [SimpleFT8](https://appshunter.io/ios/app/simpleft8/id6768739415) | — | $2.99 | Utilities | | [MeshCom](https://appshunter.io/ios/app/meshcom/id6447483289) | — | Free | Utilities | | [Morse Decoder AI](https://appshunter.io/ios/app/morse-decoder-ai/id6475193752) | 2.0 (3) | $2.99 | Utilities | | [aLog365](https://appshunter.io/ios/app/alog365/id6450749857) | 4.0 (1) | Free | Utilities | ## More apps by PABLO TURRION SAN PEDRO - [Subs](https://appshunter.io/ios/app/subs/id6760143277) All apps by PABLO TURRION SAN PEDRO: https://appshunter.io/developer/1853443733 --- *Data collected daily from the US App Store and indexed by [AppsHunter](https://appshunter.io/). User reviews are verbatim App Store reviews. Ratings, prices and chart positions refresh continuously; this snapshot is from 2026-08-12.*