# Hear Me Well — user reviews

> 10 indexed App Store user reviews of Hear Me Well by Marco Barattini, rated 3.00/5 from 4 ratings.

- Source: https://appshunter.io/ios/app/hear-me-well/id1253967703/reviews
- App overview in markdown: https://appshunter.io/ios/app/hear-me-well/id1253967703.md
- Rating breakdown: 5★ 1 · 4★ 1 · 3★ 0 · 2★ 1 · 1★ 1

## Is Hear Me Well safe?

Not enough ratings yet to assess Hear Me Well.

## Is Hear Me Well legit?

Hear Me Well appears legitimate, with a few gaps. The AppsHunter Legitimacy Score for Hear Me Well is 73 out of 100 points across 7 verification signals from App Store and developer data.

## Most critical reviews (10 lowest-rated)

### 1/5 — Good idea, but doesn’t quite work

*2019-01-27, version 1.6*

An interesting idea and if it worked would be brilliant. The lag is unacceptable and so you hear the voice a few milliseconds after a person has spoken, so effectively you hear things twice. Sadly this makes the app useless. If it could be refined to use with no lag, it could be amazing.

### 1/5 — Terrible don’t buy

*2019-01-27, version 1.6*

Delayed audio. Makes it impossible to hear and speak at the same time

### 2/5 — Lost in setup

*2019-09-07, version 1.7.2*

Doesn’t progress past the hearing test (should it?) “Back” just backs out of the screens to the start, where you can skip or perform the hearing test. 

Skipping the hearing test, it keeps beeping, and says “connect your headphones”, which were already connected, and still beeping. (Bose QC35)

Update 2019 September 

The hearing test seems to be a twitch test. After the first tone, I could hear all of the tones immediately. Something in the pipeline isn’t going quiet enough, or can’t. So it’s how fast can you click the “I can hear it” button. 

I got past the hearing test. There is some misalignment on several screens. In one place I’m to enter a profile name for the environment where the test was run, and press OK, but these 2 text fields overlap. 

I didn’t add a picture for my profile on that screen, so now I can’t add it. There’s no obvious menu, no way to restart the process. Perhaps if I add another profile, and delete the first. 

The audio processing seems OK, but there’s a lot of noise added. I’m also listening with pretty good noise-cancelling headphones, which might defeat the purpose. 

I really want this to work, as I’m really frustrated bynoisy environments. I’ll give it a shot next time.

### 2/5 — It may work for some people

*2019-05-16, version 1.7.2*

It seems to give you only the one option of “I can hear it” if you can’t well to bad just have to pretend you can even if you can’t just to progress through the setup

### 2/5 — Does not work

*2018-11-21*

Followed instructions but mike is not picking TV and nothing comes through

**Developer response:** Dear Manny,

First of all thank you for downloading Hear Me Well. We are sorry to see that you did not have a good experience with it. We always do our best to help our users as much as we can, that’s why feedbacks are crucial for us. If you’d like to discuss the issue and get support, do not hesitate to contact us anytime.

### 4/5 — Pretty good

*2020-06-14, version 1.8.4*

This works pretty good and is easy to set up but could use an adjustment to correct for the sound delay with Bluetooth headphones

### 4/5 — Super effective

*2020-03-11, version 1.7.2*

I’ve got (audiologist-measured) 80% loss in the right and 40% degradation in the left, and basically I will try anything that says it will “help” my hearing. 

At first, I was confused by the simplicity of the interface. What was it meant to do? Was it doing anything? Oh, ok, turn it up a bit with *that* slider, and there it is - noticeable amplification of the primary noise (a human), and no amp on background noise. It appears, this app simply just works. Full score. 

However, like a previous reviewer, lacking the ability to tell the app that you are unable to hear a frequency during the calibration test reduces its accuracy. A second point on the calibration would be to allow a pause between tones. Press “start”, have the first tone run until “I can hear it”, then pause until “Start” is pressed again. I found the calibration inaccurate because I wasn’t able to press the “I can hear it” button fast enough as is, with one tone running into the next. 

As a fun aside, it’s a giggle placing your phone on your belly while your tummy rumbles; and I can guarantee my iPhone’s microphone is sensitive - amplifying my heartbeat nicely into my headphones. So the app is fun, as well as useful.

### 4/5 — So far so good!

*2019-05-13, version 1.7.2*

Been using the app for a little over an hour now, setup was a breeze although I wasn’t able to hear over 3000 but still had to sit through the higher pitches. Nonetheless, I can hear cars passing by in the street while I sit on the toilet!

### 5/5 — Great App

*2018-09-02*

Just Woks. I downloaded 2 free apps and they were junk, they claimed Bluetooth but that wasn’t true. Read the info on this app and it claimed it worked with AirPods and that’s what I wanted. Figured if it worked then it would be the cheapest hearing aides I could ever buy. Downloaded app and gave it a try and it was everything I wanted. I was having trouble hearing very faint beeps given off by an air conditioner that I was servicing and once I put my iPhone up by AC with app open so mic could hear, wow, they came through loud and clear. Now if they only work in a noisy bar or restaurant. Definitely 2 thumbs up.

### 5/5 — There is not a single app like it in the App Store!

*2017-08-22*

Fantastic app! Been searching all around for anything similar... Works perfectly..  iOS has this feature built in, but only for bluetooth hearing aid's.

---

*Data collected daily from the US App Store and indexed by [AppsHunter](https://appshunter.io/). User reviews are verbatim App Store reviews. Ratings, prices and chart positions refresh continuously; this snapshot is from 2026-11-06.*
