# Joint Craft - 3D Printer app — user reviews > 35 indexed App Store user reviews of Joint Craft by Snowcraft LLC, rated 4.31/5 from 58 ratings. - Source: https://appshunter.io/ios/app/joint-craft-3d-printer-app/id6455888249/reviews - App overview in markdown: https://appshunter.io/ios/app/joint-craft-3d-printer-app/id6455888249.md - Rating breakdown: 5★ 27 · 4★ 10 · 3★ 6 · 2★ 1 · 1★ 2 ## Newest reviews (12 of 35) ### 3/5 — Why not sending me verification code *2025-11-11, version 3.0.2* I’m going through all my mail gmail and apple mail and no verification code ### 4/5 — Works well but no Support for Elegoo Link *2025-08-17* This app is handy for monitoring printers (as long as you’re on the same network). I just wish they had support for Elegoo printers (like the Centauri Carbon) via Elegoo Link. ### 4/5 — Almost perfect *2025-02-28* Love that this app utilizes live activities and widgets to monitor printers. Hopefully a future release will add support for the Bambu Lab AMS and full screen camera viewing. Update: The app floods the user’s iPhone with notification sounds after troubleshooting print failures and then starting a new print. (Example: after pressing “retry” several times on the printer when filament fails to retract) ### 3/5 — Remote view *2025-02-12* Just wish I could view remotely with out all the extra hoops and still can figure it out ### 4/5 — Almost perfect *2025-02-06* Love that this app utilizes live activities and widgets to monitor printers. Hopefully a future release will add support for the Bambu Lab AMS and full screen camera viewing. ### 3/5 — Great start for local Bambu access *2025-01-23* Great design and good price. I don’t see a way to use AMS when printing from SD card. Also, print doesn’t seem to do anything from SD card. External cams work well. **Developer response:** Bambu Lab has restricted the ability to start prints from models stored on the SD card in recent firmware updates. To work around this, you can either enable LAN-Only mode on the printer or log in Bambu Cloud account in Joint app to send print commands via Bambu Cloud. Both methods are effective. If you have further questions, feel free to contact us at support@jointcraft.app ### 4/5 — Timelapse doesn’t work *2025-01-12* Great app but I used it because Mac doesn’t play .apv Timelapse and since I’ve downloaded I only gotten to share and play one Timelapse all the others are stuck on a loading screen. **Developer response:** Transfering timelapse videos from printer may take few minutes, depending on the duration of the timelapse. Please avoid leaving the timelapse view during transfer process. If you have any further questions, feel free to contact us at support@jointcraft.app ### 4/5 — Very good with a1 mini *2024-12-30* Works seamlessely ### 3/5 — Would be 5-star if it would work remotely *2024-12-01* Great for monitoring printer jobs. I wish the widget would display multiple machines progress and I wish it would work off the LAN, remotely. I have two locations to manage. When I leave one that one becomes inaccessible. Maybe I’m missing something. **Developer response:** Hi! We're excited to share that we've added support for Bambu Cloud, making remote access easier than ever. Please update to the latest version and give it a try! If you have any further feedback, contact us at support@jointcraft.app ### 4/5 — Great Functionality *2024-11-24* The apps works great with my Bambu printer. I would like to see cloud access enabled through linking my Bambu account. The live activities and widget is a great feature, however when the time remaining is over an hour, the time gets wrapped into 2 lines instead of showing all on one. I would’ve liked to see the font size be responsive to the time remaining and always fill the same amount of space or just make the font smaller in general. Excited to see what new features are to come! ### 4/5 — Great *2024-11-18* This app works perfectly when on WiFi but after leaving my house it can’t connect to my Bambu lab printer but that’s the only problem that I have **Developer response:** Hi! We're excited to share that we've added support for Bambu Cloud, making remote access easier than ever. Please update to the latest version and give it a try! If you have any further feedback, contact us at support@jointcraft.app ### 3/5 — Nice app that fills gaps in Bambu Handy *2024-08-05* I’d really like Prusa Connect support though. ## Most critical reviews (10 lowest-rated) ### 1/5 — Doesnt work *2026-04-22* What the? **Developer response:** If you have any questions, feel free to contact us at support@jointcraft.app. ### 1/5 — Horrible *2026-03-01* This is the worst app I have ever used. It’s adverted that this free, but it’s not. ### 1/5 — Doesn’t support Tailscale *2025-02-27* Tailscale’s ips work in 100.xxx.x.x and it only supports 192.168.x.x **Developer response:** Hi, our app fully support Tailscale! You don't need to use a 100.xxx.x.x address — Tailscale also recognizes 192.168.x.x addresses and automatically routes network requests to your printer. Plus, when you're at home, 192.168.x.x connects to your printer directly, without requiring Tailscale. For a step by step guide, please check: jointcraft.app/guides/remote-access-with-tailscale If you have any further questions, feel free to reach out at support@jointcraft.app ### 1/5 — This app is not good for bamboo print *2025-02-11* Need to lock it to login and then log into all my pick up a lot of space ### 1/5 — Sucky *2024-07-17* Trash don’t get ### 1/5 — . *2024-02-18* Live activities don’t work, printer controls don’t work as expected. Tried on multiple devices, unsuccessful. App provides no trial option to see if it works properly. **Developer response:** For assistance with any issues, please contact us at support@jointcraft.app. Thank you for your feedback. ### 2/5 — Support Sucks *2026-03-19* The email will just not send. I emailed them almost a month ago and 0 response at all. I had very high hopes for this… **Developer response:** Sorry for your experience. We truly value our users and their feedback. We normally respond to emails within 1–3 business days. After reading your review, we checked both our inbox and spam folder, but were unable to find any email that had not been answered. If you’re still willing to share your feedback or suggestions, please email us again and we’ll make sure to respond as soon as possible. ### 2/5 — Cannot get this to connect *2025-01-01, version 2.4.2* I love the concept but it won’t connect what is the access code it’s asking for? I’ve tried the WiFi password that doesn’t work ### 2/5 — Not ready for prime time *2024-10-17* Live activities dont show enough information , push notifications only work when the app is open. What does work can be done for free in home assistant ### 2/5 — Lacks Family Sharing *2024-10-08* I purchased a lifetime Pro subscription and expected to share it with other members of my household through Family Sharing, but it doesn’t seem like the developer has turned on that setting. **Developer response:** Thank you for your purchase and for bringing this to our attention! You’re correct that Family Sharing was not enabled; we have now activated it. We apologize for any inconvenience this may have caused. If you have any questions or suggestions, please feel free to contact us at support@jointcraft.app. ## Most praised reviews (10 highest-rated) ### 5/5 — Best app to monitor your prints *2026-05-14* I love that this app is simple and gives me exactly what I need to make sure my 3d print is not having issues. Dynamic Island status is a plus too! ### 5/5 — Very well done *2026-01-07* Since Bambu decided to completely gut any remote feature unless you send every scrap of your data through their servers, I haven't been able to use any app to control my printer. This was clearly a deliberate move to force people into their putrid centralized ecosystem. But I'm glad there's developers out there that are doing cool stuff like this. This is really well done. Completely replaces that absolute joke of an app that they want you to use. This is better in. ### 5/5 — Good *2025-11-16, version 3.0.2* It just works, the app is Clean and works great on my P1S with an AMS 2pro. Although I would enjoy to have the small widget on your lock screen to show drying status. Good job keep it going! ### 5/5 — Well designed Klipper app *2025-10-19, version 3.0.1* Well designed app interface for controlling your Voron printers, looking forward to future updates ### 5/5 — Best print monitor BAMBU A1 *2025-01-31* Title says it all ### 5/5 — Hidden Gem *2024-12-14, version 2.4.1* Great little app, this is what the standard for all 3D Printing apps should be at a minimum! ### 5/5 — Update *2024-11-20* At first my review was 1 star because nothing was working but now I chatted with customer support and fixed it, so five stars!!! Ps the costumer service guys are super great!! ### 5/5 — Super cool app, but more free features would be great. *2024-11-07, version 2.3.3* Love it, super cool concept, imo the price is just high. Wish there were some more free widgets and live activists and stuff, if you’re happy to pay it’s awesome though. ### 5/5 — Great app for live activities *2024-10-16* Love using this app to track 3D prints via a live activity, and appreciate the developer recently adding support for live activities on Apple Watch too. Thanks! **Developer response:** Thank you for your purchase and for bringing this to our attention! You’re correct that Family Sharing was not enabled; we have now activated it. We apologize for any inconvenience this may have caused. If you have any questions or suggestions, please feel free to contact us at support@jointcraft.app. ### 5/5 — Responsive Developer, Solid App *2024-10-11* [Updated] Appreciate the developer of this app enabling family sharing so that I can share a pro subscription within my household. Many thanks! One additional request: an optimized live activity for watchOS 11 **Developer response:** Thank you for your purchase and for bringing this to our attention! You’re correct that Family Sharing was not enabled; we have now activated it. We apologize for any inconvenience this may have caused. If you have any questions or suggestions, please feel free to contact us at support@jointcraft.app. --- *Data collected daily from the US App Store and indexed by [AppsHunter](https://appshunter.io/). User reviews are verbatim App Store reviews. Ratings, prices and chart positions refresh continuously; this snapshot is from 2026-08-01.*