# JumpRun for skydivers — Exit point GPS, fully offline > Exit point GPS, fully offline (iPhone/iPad app by JumpStack K.K..) - Source: https://appshunter.io/ios/app/jumprun-for-skydivers/id6805331006 (this page in markdown: same URL + `.md`) - Developer: [JumpStack K.K.](https://appshunter.io/developer/6805331008) - Category: Navigation, Sports - Price: Free - Age rating: 4+ - Requires: iOS 16.0 · 45 MB - Languages: American English, Japanese - Released: 2026-08-31 - Data updated: 2026-09-19 - User reviews in markdown: https://appshunter.io/ios/app/jumprun-for-skydivers/id6805331006/reviews.md ## What is JumpRun for skydivers? JumpRun is a GPS instrument for the ride to altitude. Set your exit point once. On the way up, JumpRun shows how far you are from it, how long the run in will take at your current ground speed, your height above the ground, your speed and your track - in figures large enough to read from a jump seat. Download the map for your drop zone once, on the ground. After that everything works with the doors closed and the phone in airplane mode - there is no signal to wait for and nothing to load while you climb. WHAT IT SHOWS Distance to the point and estimated time en route at your current ground speed Height above the ground, taken from the barometer Ground speed and track over the ground, in true bearings Time since takeoff A moving map with your track line and a ring around the point NO SETTING UP The pressure reference is recorded on the ground and fixed at takeoff. There is nothing to calibrate and no field elevation to enter. Takeoff and landing are detected on their own. Timers start and clear themselves. Nothing changes on its own in flight. Night mode is switched by hand, never by a clock or a sunset. MAPS Get the map for anywhere on earth - from where you are standing, or from coordinates you type in. Each one covers 20 km around that point. As many as you want, at no cost: nothing to unlock, no subscription. Once an area is on the phone it never needs a signal again. Place names are not drawn. This is a map to read your position against, not a map for finding streets. POINTS Add points by coordinates or from where you are standing Nudge a point on the map when the spot moves, and return it to where it was first registered at any time A ring of 0.1, 0.2 or 0.3 miles around each point, set per point Distances in miles, nautical miles or kilometres FOR NIGHT AND FOR GLOVES Dark and red night modes, plus extra dimming for when the iPhone's own minimum brightness is still too bright Large figures, large controls, no animation to chase PRIVACY JumpRun collects nothing. There are no accounts, no analytics, no advertising and no third-party SDKs. The only time it uses the network is when you ask it to fetch a map area, and even then it only reads: nothing about you is ever sent anywhere. Your points, settings and maps stay on the device. TRY IT ON THE GROUND Turn on the demo flight in Settings to see every instrument working against a simulated climb and jump run. IMPORTANT JumpRun is a recreational reference tool. It is not an aviation navigation instrument and has not been certified, tested or approved by any aviation authority. It is not a substitute for a certified altimeter, an audible altimeter or aircraft instruments, and it does not replace your own altitude awareness. Every decision about a jump remains yours and your pilot's, made under the rules of your drop zone and your national authority. Requires iPhone with iOS 16 or later. A barometer is used where the device has one; where it does not, height comes from GPS. ## Version history (last 4 releases) ### 1.1.1 — 2026-09-06 • "Keep screen on" now does exactly that: with it on, the screen stays awake on the ground too, so it no longer goes dark and asks for your passcode after landing. • With it off, the screen still stays on from takeoff to landing — you will never lose the instruments in the aircraft. ### 1.1.0 — 2026-09-04 Flight log: • Every flight is now saved on your device. Today's flights appear at the bottom of the Flight tab, newest first, numbered in the order you took off. • Pick a date range on the calendar in Settings > Flight log and export your flights as a CSV file — takeoff, landing, duration and maximum altitude. • You can delete all past records at any time. Nothing is ever uploaded; the log stays on your device. Aircraft icon: • Choose an airplane or a helicopter for your own aircraft on the map, in Settings > Display > Aircraft. Also: • "Closest to point" has been removed from the Flight tab. ### 1.0.2 — 2026-09-01 Better offline maps: • All downloaded map packs are now shown together. Adjacent areas join into one continuous map, with no blank edges when panning between them. • If there is no map at the center of the screen, a "No map for this area" notice appears right there — tap it to download the map for that spot. Clearer status and guidance: • New status chips on the map screen show GPS quality (including reduced accuracy), barometer calibration, and flight state at a glance. • If location permission is off, the app now says so and takes you to Settings. Small fixes: • Deleting a downloaded map now asks for confirmation. • Bigger touch targets for switches and buttons — easier to hit with gloves on. • Max altitude and closest approach are now recorded from takeoff, even if you open the Flight tab later. • VoiceOver labels for the map buttons and ground screens. ### 1.0 — 2026-08-31 No release notes. ## Related topics [jumprun for skydivers](https://appshunter.io/ios/topics/jumprun-for-skydivers) --- *Data collected daily from the US App Store and indexed by [AppsHunter](https://appshunter.io/). User reviews are verbatim App Store reviews. Ratings, prices and chart positions refresh continuously; this snapshot is from 2026-09-19.*