# LaserCalc HVAC Load Calculator — Scan a room. Get the load.

> HVAC load calculation tool based on ACCA Manual J 8th Edition standards. (iPhone/iPad app by Imogen Technologies, LLC.)

- Source: https://appshunter.io/ios/app/lasercalc-hvac-load-calculator/id6502254919 (this page in markdown: same URL + `.md`)
- Developer: [Imogen Technologies, LLC](https://appshunter.io/developer/1744792441)
- Category: Business, Productivity
- Price: Free with in-app purchases
- Rating: 3.90/5 from 7 App Store ratings · 4 written reviews indexed
- Age rating: 4+
- Requires: iOS 15.1 · 86 MB
- Languages: American English, European Spanish
- Released: 2024-05-13
- Data updated: 2026-11-21
- Monetization: free with in-app purchases
- User reviews in markdown: https://appshunter.io/ios/app/lasercalc-hvac-load-calculator/id6502254919/reviews.md

## What is LaserCalc HVAC Load Calculator?

Scan a room, get the load. LaserCalc runs a professional residential load calculation from the driveway, and you leave with a report your customer can hold.

LaserCalc is an HVAC load calculation tool for contractors, technicians and engineers working in the United States. Calculations draw on 2025 ASHRAE climatic design data from more than 2,700 US weather stations.

SCAN THE ROOM
• Scan a room with LiDAR and capture the walls, ceiling height and windows as you walk
• Every window is measured, along with the direction it faces
• LaserCalc names the room for you
• No LiDAR? Measure with the camera
• See every scanned room in 3D

FOUR WAYS TO MEASURE A HOME
• Block Load: we look up the home's square footage from the address. The fastest path to a number.
• Scan rooms with LiDAR (Pro Apple devices)
• Scan rooms with the camera
• Enter rooms manually, with full control over room size, ceiling height, exposed walls and windows by direction

REPORTS YOU CAN HAND OVER
• Heating and cooling loads with recommended capacity in BTU and tons
• Shareable PDF reports, sent from your phone before you pull out of the drive
• Add your company logo to every report

YOUR BOOK OF BUSINESS, EVERYWHERE
• Clients and load calcs save automatically and follow you across devices
• Start an estimate on your phone, finish it on your tablet

PRO
• Room-by-room load calcs for tighter equipment sizing
• Automatic room scanning with LiDAR or your camera (LiDAR requires a Pro Apple device)

Available in English and Spanish. The app follows your device language, and you can switch it any time in Settings.

LaserCalc is built for properties in the United States. Address lookup and climate data cover the US only.

Climatic Design Data © 2025 ASHRAE, www.ashrae.org. Used with permission. ASHRAE has not endorsed, reviewed, or certified this product.

Final equipment selection is the responsibility of the installing contractor and should be based on manufacturer specifications.

LaserCalc Pro is an auto-renewing subscription. Payment is charged to your Apple Account at confirmation of purchase, and renews unless you turn off auto-renew at least 24 hours before the period ends. Manage or cancel in your Apple Account settings.

Terms of Use (EULA): https://www.apple.com/legal/internet-services/itunes/dev/stdeula/

Privacy Policy: https://airmatchpro.com/privacy-policy

## Key features

- ACCA Manual J 8th Edition compliance
- DOE and NREL data integration
- Professional HVAC load calculations
- Supports contractors and engineers

## Pricing and in-app purchases

Base price: Free.

**Subscriptions**

| Subscription | Price | Period |
| --- | --- | --- |
| LaserCalc Pro | $49.99 | per month |
| Monthly | $9.99 | per month |
| Monthly Subscription | $9.99 | per month |

**One-time purchases**

| Purchase | Price | Type |
| --- | --- | --- |
| Monthly Subscription | $9.99 | one-time |


## Is LaserCalc HVAC Load Calculator safe?

Not enough ratings yet to assess LaserCalc HVAC Load Calculator.

## Is LaserCalc HVAC Load Calculator legit?

LaserCalc HVAC Load Calculator appears legitimate, with a few gaps. The AppsHunter Legitimacy Score for LaserCalc HVAC Load Calculator is 78 out of 100 points across 7 verification signals from App Store and developer data.

## Recent user reviews (4 of 4)

All indexed reviews: https://appshunter.io/ios/app/lasercalc-hvac-load-calculator/id6502254919/reviews.md

### 1/5 — It worked but now it don’t

*2026-03-11*

I have used this app for several months now and something has recently changed and it is not allowing me to log in. I have changed my password and even deleted the app and reinstalled it. I will cancel my subscription unless there is a fix that is offered soon.

### 5/5 — Great staff

*2025-08-20*

Don’t know what happened. Everything was going great until the app won’t load and kicks you out. Refresh and everything and app doesn’t work. Talked to support and they have addressed the issue and hopefully will be up and running in no time!

### 1/5 — Keeps crashing

*2025-08-20*

Can’t use it…keeps crashing

### 5/5 — Quick, easy, and accurate

*2024-05-15*

This is a great tool to have in your pocket for quick load calculations. There are times where you might want to do the full extended load calc, but especially for replacement work, this is an easy way to verify that the new system is sized, right, especially if the homeowner has made upgrades to the windows or insulation. You get an accurate and detailed load in just a few clear steps.

## Frequently asked questions about LaserCalc HVAC Load Calculator

### What HVAC standards does LaserCalc Mobile follow?

LaserCalc Mobile adheres to the ACCA Manual J 8th Edition standards, a widely recognized industry guideline for load calculations.

### Does LaserCalc Mobile have ads?

Yes, LaserCalc Mobile contains advertisements. This is typical for free applications that offer in-app purchases.

### What devices is LaserCalc Mobile available on?

LaserCalc Mobile is available on iPhone and iPod devices, as indicated by its supported devices list.

### What is the pricing for LaserCalc Mobile?

LaserCalc Mobile is free to download and use, with options for in-app purchases. It also offers a monthly subscription at $9.99 with a 7-day free trial.

### How often is LaserCalc Mobile updated?

The latest version, 1.0.8, was released on August 20, 2025, suggesting regular updates to maintain functionality and standards.

### What is the age rating for LaserCalc Mobile?

LaserCalc Mobile has an age rating of 4+, making it suitable for a broad audience.

### What data sources does LaserCalc Mobile integrate?

LaserCalc Mobile integrates data from the Department of Energy (DOE) and the National Renewable Energy Laboratory (NREL) to enhance calculation accuracy.

### What are the subscription options for LaserCalc Mobile?

LaserCalc Mobile offers a monthly subscription for $9.99, which includes a 7-day free trial period.

## Version history (last 5 releases)

### 2.1 — 2026-11-17

Version 2.1

PRO: SCAN THE WHOLE HOUSE
On an iPhone or iPad with LiDAR, scan the whole house in one walk. The rooms land in the right place next to each other, each on its own floor as you go up the stairs, and you get a floor plan for every story and a 3D view of the house. A new load calc now asks first whether you want to scan the whole house or go room by room.

PRO IS IN EVERY FREE TRIAL
Start a Standard free trial and the Pro features are yours to use until it renews.

Duct location and layout are now picked from pictures instead of lists.

Fixes: the address suggestions no longer leave a white block in dark mode.

Version 2.0.2

Fixes a freeze. The animated icons in the load calc kept running after you moved past them, and over a long session that could lock the app up for minutes at a time. They stop now when they leave the screen.

Version 2.0 adds LaserCalc Pro.

PRO: SCAN A ROOM WITH LiDAR
Walk the room and let the phone measure it. LiDAR picks up the walls, the ceiling height, and the windows while you move, so a room is done in seconds. No tape measure, no notepad, no typing it in afterward. LiDAR scanning needs an iPhone Pro or an iPad Pro.

PRO: SCAN A ROOM WITH YOUR CAMERA
No LiDAR on your phone? Use the camera instead. Aim at each corner of the room and tap. You get the same room-by-room numbers on any device that runs LaserCalc, and it is a genuine alternative, not a consolation prize.

PRO: ROOM-BY-ROOM REPORTS
A heating and cooling load for every room, not one number for the whole house. That is what sizes the equipment and balances the ducts, and it goes straight into the PDF you hand your customer.

NEW FOR EVERYONE

More than 2,700 ASHRAE cities. Odds are the town you are standing in is on the list now, with its own design temperatures instead of the nearest big city's.

LaserCalc speaks Spanish. The app follows your device language, and you can switch it any time in Settings.

New questions in the load calc: number of floors, ventilation and combustion air, duct system layout, and fireplaces. Each one feeds a Manual J load the calc could not see before.

The address lookup fills in more for you. Along with square footage it now pulls stories, fireplaces, floor type, and occupancy from the property record when they are on file. Every one of them stays yours to change.

Closer to Manual J. Two-story infiltration, per-fireplace infiltration, graduated duct factors, and the MJ8AE appliance allowances are all figured the way the spec asks for them.

Numerous design improvements and fixes.

### 2.0.2 — 2026-09-16

Version 2.0.2

Fixes an occasional freeze when navigating through the load calc wizard

Version 2.0 adds LaserCalc Pro.

PRO: SCAN A ROOM WITH LiDAR
Walk the room and let the phone measure it. LiDAR picks up the walls, the ceiling height, and the windows while you move, so a room is done in seconds. No tape measure, no notepad, no typing it in afterward. LiDAR scanning needs an iPhone Pro or an iPad Pro.

PRO: SCAN A ROOM WITH YOUR CAMERA
No LiDAR on your phone? Use the camera instead. Aim at each corner of the room and tap. You get the same room-by-room numbers on any device that runs LaserCalc, and it is a genuine alternative, not a consolation prize.

PRO: ROOM-BY-ROOM REPORTS
A heating and cooling load for every room, not one number for the whole house. That is what sizes the equipment and balances the ducts, and it goes straight into the PDF you hand your customer.

NEW FOR EVERYONE

More than 2,700 ASHRAE cities. Odds are the town you are standing in is on the list now, with its own design temperatures instead of the nearest big city's.

LaserCalc speaks Spanish. The app follows your device language, and you can switch it any time in Settings.

New questions in the load calc: number of floors, ventilation and combustion air, duct system layout, and fireplaces. Each one feeds a Manual J load the calc could not see before.

The address lookup fills in more for you. Along with square footage it now pulls stories, fireplaces, floor type, and occupancy from the property record when they are on file. Every one of them stays yours to change.

Closer to Manual J. Two-story infiltration, per-fireplace infiltration, graduated duct factors, and the MJ8AE appliance allowances are all figured the way the spec asks for them.

Numerous design improvements and fixes.

### 2.0.1 — 2026-09-05

Version 2.0 adds LaserCalc Pro.

PRO: SCAN A ROOM WITH LiDAR
Walk the room and let the phone measure it. LiDAR picks up the walls, the ceiling height, and the windows while you move, so a room is done in seconds. No tape measure, no notepad, no typing it in afterward. LiDAR scanning needs an iPhone Pro or an iPad Pro.

PRO: SCAN A ROOM WITH YOUR CAMERA
No LiDAR on your phone? Use the camera instead. Aim at each corner of the room and tap. You get the same room-by-room numbers on any device that runs LaserCalc, and it is a genuine alternative, not a consolation prize.

PRO: ROOM-BY-ROOM REPORTS
A heating and cooling load for every room, not one number for the whole house. That is what sizes the equipment and balances the ducts, and it goes straight into the PDF you hand your customer.

NEW FOR EVERYONE

More than 2,700 ASHRAE cities. Odds are the town you are standing in is on the list now, with its own design temperatures instead of the nearest big city's.

LaserCalc speaks Spanish. The app follows your device language, and you can switch it any time in Settings.

New questions in the load calc: number of floors, ventilation and combustion air, duct system layout, and fireplaces. Each one feeds a Manual J load the calc could not see before.

The address lookup fills in more for you. Along with square footage it now pulls stories, fireplaces, floor type, and occupancy from the property record when they are on file. Every one of them stays yours to change.

Closer to Manual J. Two-story infiltration, per-fireplace infiltration, graduated duct factors, and the MJ8AE appliance allowances are all figured the way the spec asks for them.

Numerous design improvements and fixes.

### 2.0 — 2026-09-04

Version 2.0 adds LaserCalc Pro.

PRO: SCAN A ROOM WITH LiDAR
Walk the room and let the phone measure it. LiDAR picks up the walls, the ceiling height, and the windows while you move, so a room is done in seconds. No tape measure, no notepad, no typing it in afterward. LiDAR scanning needs an iPhone Pro or an iPad Pro.

PRO: SCAN A ROOM WITH YOUR CAMERA
No LiDAR on your phone? Use the camera instead. Aim at each corner of the room and tap. You get the same room-by-room numbers on any device that runs LaserCalc, and it is a genuine alternative, not a consolation prize.

PRO: ROOM-BY-ROOM REPORTS
A heating and cooling load for every room, not one number for the whole house. That is what sizes the equipment and balances the ducts, and it goes straight into the PDF you hand your customer.

NEW FOR EVERYONE

More than 2,700 ASHRAE cities. Odds are the town you are standing in is on the list now, with its own design temperatures instead of the nearest big city's.

LaserCalc speaks Spanish. The app follows your device language, and you can switch it any time in Settings.

New questions in the load calc: number of floors, ventilation and combustion air, duct system layout, and fireplaces. Each one feeds a Manual J load the calc could not see before.

The address lookup fills in more for you. Along with square footage it now pulls stories, fireplaces, floor type, and occupancy from the property record when they are on file. Every one of them stays yours to change.

Closer to Manual J. Two-story infiltration, per-fireplace infiltration, graduated duct factors, and the MJ8AE appliance allowances are all figured the way the spec asks for them.

Numerous design improvements and fixes.

### 1.5.3 — 2026-05-30

Added a Send Feedback button on the settings page so you can more easily report issues or suggestions. Added automatic reporting of errors so our team can improve app stability more easily.

## Apps similar to LaserCalc HVAC Load Calculator

| App | Rating | Price | Category |
| --- | --- | --- | --- |
| [TrueFlow HVAC Air Flow](https://appshunter.io/ios/app/trueflow-hvac-air-flow/id1518628173) | 5.0 (4) | Free | Business |
| [American Standard® Technician](https://appshunter.io/ios/app/american-standard-technician/id1525531804) | 4.8 (89) | Free | Business |
| [FMHero](https://appshunter.io/ios/app/fmhero/id1570918942) | 4.7 (14) | Free | Business |
| [Johnstone Supply HVACR](https://appshunter.io/ios/app/johnstone-supply-hvacr/id6654926877) | 4.9 (8) | Free | Business |
| [CoolCloud HVAC 2.0](https://appshunter.io/ios/app/coolcloud-hvac-20/id6463789952) | 2.7 (20) | Free | Business |

## More apps by Imogen Technologies, LLC

- [AirMatch Pro](https://appshunter.io/ios/app/airmatch-pro/id6445839001)

All apps by Imogen Technologies, LLC: https://appshunter.io/developer/1744792441

---

*Data collected daily from the US App Store and indexed by [AppsHunter](https://appshunter.io/). User reviews are verbatim App Store reviews. Ratings, prices and chart positions refresh continuously; this snapshot is from 2026-11-21.*
