# moneo\|blue — Parameterize process data > Parameterize process data (iPhone/iPad app by ifm electronic gmbh.) - Source: https://appshunter.io/ios/app/moneoblue/id6480179737 (this page in markdown: same URL + `.md`) - Developer: [ifm electronic gmbh](https://appshunter.io/developer/626164002) - Category: Productivity, Utilities - Price: Free - Age rating: 4+ - Requires: iOS 15.6 · 159 MB - Languages: English, German - Released: 2024-04-21 - Data updated: 2026-05-19 - User reviews in markdown: https://appshunter.io/ios/app/moneoblue/id6480179737/reviews.md ## What is moneo|blue? With the ifm moneo|blue app you can setup wireless the ifm Bluetooth Mesh-base station and Mesh adapter (art. no. EIO404 and EIO 344) and connect to IO-Link devices of arbitrary manufacturer. You can read and write IO-Link process data, device information and parameter from the IO-Link device. You communicate using the app with the IO-Link devices. Additionally you can configure the parameter of the Bluetooth Mesh-base station and the Bluetooth Mesh adapter with the app. ## Version history (last 5 releases) ### 2.15.26 — 2026-04-10 Compatibility Mesh Adapter EIO344: FW v1.15 or earlier Base Station EIO404: FW v1.55 or earlier mioty Adapter EIO24x: FW v1.01 mioty Gateway AW1100: FW R17 or later New Features mioty adapter (EIO24x) communication, onboarding configuration, and data loading Secure sharing of mioty onboarding data (ZIP with password) Manual import and deletion of IODDs NFC and Bluetooth configuration for Sentinum Apollon‑Q and Juno sensors Bug Fixes General stability and fixes ### 2.15.18 — 2026-01-14 App communicates with the new firmware V1.15 of Mesh Adapter EIO344 and new firmware V1.55 of Base Station EIO404. Compatibility firmware V1.15 and earlier of Mesh Adapter EIO344 firmware V1.55 and earlier of Base Station EIO404 New Features - New Bluetooth password feature of firmware V1.15 of EIO344 and firmware V1.55 of EIO404 - Faster Communication if supported by Firmware - Reboot devices - Blink LED of devices - Several Bug Fixes ### 2.15.6 — 2025-06-24 New features: - Local Manual Import of IODD; one file from filesystem. Changes: - updated the IODD parser library. - updated the UI framework and related libraries. - several texts and translations updated. Bug fixes: - keyboard and region selection related problems corrected. - Firmware update was not working for connected mesh adapter via Notification icon. - Problem while loading the parameter & user press back then it navigate to Device info screen & "loading device parameter loader" display on screen - Bluetooth pair popup occurs once again on Base config screen & after pairing "Connecting to base station" & Spinner display continuously. Workaround: User need to kill the app. - Ou2 "InEG" Analog value is not display after write to device. - Error when writing parameters to LW2 device. - If Bluetooth is OFF then the app does not open. - Dropdown with text box element cannot be used e.g. for entering default values. ### 2.14.8 — 2025-03-26 New features: - The app contains the latest firmware of the Base station EIO404 and Mesh adapter EIO344 and automatically checks if connected devices have older firmware versions installed. User may use the built-in version or a downloaded version for firmware updates. - Firmware updates can be cancelled. - Parameters on the IO-Link devices page are grouped according to the IODD. Bugs fixed: - Several app crashes were removed. App is more stable now when used with a base station that is connected to a large number of adapters. - Several smaller UI updates and corrections. - Several Connection problems and instable connections fixed. - Firmware update is more stable now. - Combo Box fixed which supports selection of data and manually entering a number. (Support request) Known issues: - Problem with French region and selection of the correct keyboard (support request), Workaround is to select a different region, e.g. German region. ### 2.13.1 — 2024-11-20 New: - Landscape is disabled for the app. The app will always stay in portrait mode - When the connection was lost to an IO-Link device because the IO-Link device was removed, then the user can press the refresh button or go back. Changes: - several typos, spellings, wordings corrected Bug fixes: - For a base station that is connected to several Mesh adapters, when the user disconnects one Mesh adapter and reconnects the same again, then the refresh of the base station overview gets stuck. Now the base station overview refreshes consistently after reconnect. - If directly connected Mesh adapter is disconnected while a firmware download is ongoing, then user is informed by a popup. - When user provisioned a mesh adapter then on the Base overview page inside the related tile a (wrong) message will be shown that the adapter would be disconnected. Now the correct information of the adapter is shown. - Reset the firmware update state after a successful reconnection. - The progress bar gets stuck if the user retries to read the parameters of a sensor after sending an IO-Link command to the sensor. - When internet is OFF and IODD cannot be downloaded then show an error message. - Modified IO-Link parameter should be discarded when user leaves the device parameter page. - For VVB sensor, the process value and the unit of measurement mismatch on device info page and parameter page. - After a connection loss and after the user pressed the cancel button and the app redirected to the home page, still the "failed to connect" popup occured on the home page. - In the sensor parameterization, the OK button of the drop down box did not allow to tap on the OK button for changed values - Password view option did not work when you enter the password and directly press on the view option. It did not display password. The behaviour of the "view" button is now as expected and used widely in apps. - In iOS the radio button text overlaps other buttons - The app changed the language only if the user changed the region. Now the app changes the language if the user changes the system language.- For the DV sensors, when the user comes back from the configuration page to the device info page then the image for the sensor was not displayed. Now all relevant information is shown to the user. ## Apps similar to moneo|blue | App | Rating | Price | Category | | --- | --- | --- | --- | | [Odrid HMI](https://appshunter.io/ios/app/odrid-hmi/id1066799333) | 4.0 (4) | $34.99 | Productivity | | [iO-Fly](https://appshunter.io/ios/app/io-fly/id1004071859) | 5.0 (1) | Free | Productivity | | [SensControl](https://appshunter.io/ios/app/senscontrol/id1484069590) | 5.0 (1) | Free | Productivity | | [SIMATIC Notifier](https://appshunter.io/ios/app/simatic-notifier/id1442764496) | — | Free | Productivity | | [TRACTIAN](https://appshunter.io/ios/app/tractian/id1590498655) | 4.6 (33) | Free | Productivity | | [cMT Viewer](https://appshunter.io/ios/app/cmt-viewer/id553431850) | 4.6 (8) | Free | Productivity | ## More apps by ifm electronic gmbh - [ifm products](https://appshunter.io/ios/app/ifm-products/id1137626128) - [O2I Teach](https://appshunter.io/ios/app/o2i-teach/id1452788111) - [ifm mobile](https://appshunter.io/ios/app/ifm-mobile/id1458850765) - [ifm Events](https://appshunter.io/ios/app/ifm-events/id1495054567) - [moneo\|blue classic](https://appshunter.io/ios/app/moneoblue-classic/id1530156487) All apps by ifm electronic gmbh: https://appshunter.io/developer/626164002 ## Related topics [ifm moneo](https://appshunter.io/ios/topics/ifm-moneo) · [ifm electronic gmbh](https://appshunter.io/ios/topics/ifm-electronic-gmbh) · [milon industries gmbh](https://appshunter.io/ios/topics/milon-industries-gmbh) --- *Data collected daily from the US App Store and indexed by [AppsHunter](https://appshunter.io/). User reviews are verbatim App Store reviews. Ratings, prices and chart positions refresh continuously; this snapshot is from 2026-05-19.*