# Nestcut — Pattern nesting for cutters

> Pattern nesting for cutters (iPhone/iPad app by Ashton Stewart.)

- Source: https://appshunter.io/ios/app/nestcut/id6828386425 (this page in markdown: same URL + `.md`)
- Developer: [Ashton Stewart](https://appshunter.io/developer/6828386277)
- Category: Utilities, Graphics & Design
- Price: Free with in-app purchases
- Age rating: 4+
- Requires: iOS 17.0 · 37 MB
- Languages: American English
- Released: 2026-11-11
- Data updated: 2026-11-18

## What is Nestcut?

Nestcut is a nesting tool for people who cut shaped pieces out of sheet or roll goods:
   leather, fabric, felt, veneer, foam, gasket sheet. Type in the patterns and the roll width,
   and it packs them onto the strip, tells you how much of the run goes to waste, and prints the
   map at 1:1 so you can lay it straight on the material.

   The shapes you can give it

   A rectangle, a rectangle with one corner bevelled off, an L-shape, a circle, or any outline
   typed as a list of corner points. Each piece carries its own quantity, its own contour
   allowance, and a name you will recognise on the cut list.

   What the layout obeys

   The one thing a plank-and-profile cut calculator cannot do: material direction, set per
   piece. For each pattern you say whether it may be turned at all. Fixed, for nap, pile, grain
   or the stretch direction of a hide. End for end only. Quarter turns. Or any forty-five degree
   step. The nesting never breaks that rule to win a few millimetres.

   Pieces can also be marked as a mirrored pair, and every second copy is then laid out as a
   mirror image, which is how the left and right of a boot upper, a glove or a shoe lining
   actually get cut.

   Flaws in the goods are marked as areas on the roll, measured from the edge and from the start
   of the run, and the layout steps around them.

   What you get back

   The cut map, with every piece numbered in cutting order, top to bottom. The length of run
   used. The waste as a percentage, worked out from the real outlines rather than their bounding
   boxes, so an L-shape nested inside another one counts as the saving it is. A list of anything
   that did not fit, with the reason: wider than the roll, or no room left. And the cut list,
   each piece with its distance from the edge of the roll and from the start of the run.

   Overlap is tested on the real outlines. Concave shapes are split into convex parts, so one
   piece can sit inside the notch of another, and nothing is ever allowed to touch closer than
   the allowances you set.

   Printing

   The map prints at 1:1 across as many A4 sheets as the drawing needs, with a glue strip marked
   on both of every pair of neighbouring sheets so the outlines carry on across the join. There
   is also a scaled single sheet for looking at, labelled as not for cutting.

   Every sheet carries a 100 mm control bar. Measure it before you cut anything. If it is not
   100 mm, the printer rescaled the page and the map is the wrong size.

   What it will not do

   It does not know your knife. There is no kerf allowance and no shrinkage: the contour
   allowance you type is the only margin. Free rotation is in forty-five degree steps, not
   continuous. It does not read the material from a photograph, and it has no opinion about
   whether your roll is as wide as its label says.

   Everything is worked out on the iPhone. There is no account, no sign-up, no network code, no
   advertising and no analytics, and the app asks for no permissions at all.

   Nestcut Pro is a single purchase that raises the limit from twelve pieces to two hundred,
   removes the limit on stored layouts, adds PDF and CSV export, the full roll width library and
   flaw marking. The nesting itself, the waste figure, the cut list and printing at 1:1 are in
   the free app and stay there.

## Pricing and in-app purchases

Base price: Free.

**One-time purchases**

| Purchase | Price | Type |
| --- | --- | --- |
| Nestcut Pro | $1.99 | one-time |


## Is Nestcut safe?

Not enough ratings yet to assess Nestcut.

## Is Nestcut legit?

Nestcut has limited verification signals. The AppsHunter Legitimacy Score for Nestcut is 58 out of 100 points across 7 verification signals from App Store and developer data.


## Version history (last 2 releases)

### 1.1 — 2026-11-17

Plan your cuts. Know your material costs.

Nestcut now lets you calculate the cost of a cutting layout using the price of your roll material.

Enter a price per metre or yard in your preferred currency, then see the length you need to order, the total cost of the cut, and the amount left as offcut.

Each piece receives its share of the material cost, with all costs adding up to the full cut price.

Your pricing details are saved with the layout for future reference.

Find Material Cost in the Cuts tab.

This release also brings a refreshed app icon and analytics integration improvements.

### 1.0.0 — 2026-11-11

No release notes.

## More apps by Ashton Stewart

- [Platewrap](https://appshunter.io/ios/app/platewrap/id6828386275)

All apps by Ashton Stewart: https://appshunter.io/developer/6828386277

## Related topics

[jd cuts](https://appshunter.io/ios/topics/jd-cuts)

---

*Data collected daily from the US App Store and indexed by [AppsHunter](https://appshunter.io/). User reviews are verbatim App Store reviews. Ratings, prices and chart positions refresh continuously; this snapshot is from 2026-11-18.*
