# pecron — user reviews > 46 indexed App Store user reviews of pecron by Shenzhen pecron Technology Co.,Ltd. - Source: https://appshunter.io/ios/app/pecron/id6449687651/reviews - App overview in markdown: https://appshunter.io/ios/app/pecron/id6449687651.md ## Newest reviews (13 of 46) ### 2/5 — There is a newer app *2026-08-20, version 1.9.2* Look for the newer app from Pecron. It’s much better. I wish i knew about it earlier. ### 2/5 — Still falling short *2026-05-17, version 1.9.2* Still lacking useable features. ### 3/5 — It works, sorta *2026-03-24, version 1.9.2* You need to create a pecron account, verify your e-mail address, and have a wifi connection the first time you connect a device. After the first connection, you can just use Bluetooth, or at least for my e1000lfp it works. The English translations used in the app are rough, but if you understand power stations you can eventually figure out what they are trying to say. The device only lets you limit AC charging with "25%, 50%, 75%, 100%" menu rather than showing actual wattage or a slider. The fact that I can't hard set the AC charging to 100 watts means I can't charge the station with my RV's dinky little 100 watts inverter. The DC cigarette charging is only available at 8 amps (around 100 watts) with no way to modify it to use less. That's a huge deal for me, as my car uses only 1 fuse for 2 cigarette sockets, so when charging the power station in the back I can't use the front cigarette port to charge my phone. EcoFlow, for example, lets me set the cigarette charging to 8 amps, 6 amps, or 4 amps, which is much more convenient. All that said, the app does technically work and my pecron power station was about $200 cheaper than a same wattage unit from EcoFlow. ### 2/5 — Wi-Fi issues with LFP 1500 *2026-03-07, version 1.9.2* Wi-Fi problems reconnecting to my LFP 1500 after storage is App is certainly not intuitive. ### 3/5 — Important INFO *2026-02-17, version 1.9.2* This app is absolutely not pointless!!! The Pecron (F3000LFP), not sure about others, does not require Wi-Fi to be able to connect to your phone. In the OFF position, if you hold the button for 5 seconds it will start flashing the Wi-Fi symbol on the unit, but through the Pecron app you will be able to connect your device via Bluetooth. As of right now, there are some features via the app that are not exactly usable, but I am sure in the future they will become usable. Most of what the app has available as far as settings for the pecron unit is also available on the HUD on the unit itself. The user manual gives all relevant information on how to adjust the settings. The app just makes it more user-friendly. The Pecron website is also sub-par. Registering for the warranty was confusing. The website via PC did not work to create an account or register for warranty. The website via mobile allowed for account creation, and registering for warranty. Take it for what it is, but the unit itself is solid, quality seems to be top-tier and watching all reviews on YouTube, Pecron seems to be the best bang for your buck. It provides more features and options to use non-proprietary batteries as battery expansion. ### 3/5 — Charge limit *2025-11-14, version pecron v1.8.1* Please add feature to configure charge limit. Say 20-80% ### 2/5 — Wifi only *2025-10-03, version pecron v1.8.1* This app only works with Wi-Fi, useless in places I don't have wifi, like camping... I use unit for the trailer and keep it in the back of the truck out of the way. Don't need unit on all the time, as it wastes about 100w per hour the inverter is on. ### 1/5 — Doesnt work *2025-06-30, version pecron v1.8.1* Zero effort was put in to the building of and maintenance of this app. One u shouldn’t need to create an account, two you shouldnt need to enter wifi information, 3 even if u do those the app still does not work. ### 2/5 — Crashes a ton *2025-06-16, version pecron v1.8.1* Can barely get connectivity to work. Automations crash the app when trying to create/add them. Honestly, seems like good hardware that’s let down by doody software. ### 1/5 — Really *2025-05-26, version pecron 1.8* It’s amazing how bad this app is. Can’t even do the simple task to connect to the WiFi. Please do better. ### 1/5 — Needs fixed *2025-05-13, version pecron 1.8* App says it connects via Bluetooth but doesn’t receive anything from power station ### 4/5 — Use your head *2025-04-15, version pecron 1.8* I think many of the people in the comments didn’t follow instructions for the Wi-Fi setup. It was super intuitive, just use your 2.4ghz network, I don’t think it works with 5ghz. The app is awesome! My only notes are that I wish I had a way to check Cycle count and battery health. I would also love if I could set the charge speed limits as a way the value instead of a % ### 2/5 — Not good time sucker *2025-03-29, version pecron 1.8* Over and over again, trying to get this to connect. It took an unbelievable amount of time just to register. I am not new to this type of format so this is a problem with the app. Hope they’re able to get it together in the meantime don’t bother. ## Most critical reviews (10 lowest-rated) ### 1/5 — E1000lfp *2026-05-09, version 1.9.2* One of the most useless apps I’ve ever seen I really am not that impressed with the machine, but it does the job, but I will be returning it because of this useless app This is the year 2026 This should be a simple Bluetooth connection why pecron I hate the product because of this app. I’m on a trip and I’m unable to monitor it in my car while it’s in the back it’s pointless. I’m going to get rid of this thing and get something else. ### 1/5 — Sketchy :/ *2026-04-11, version 1.9.2* Super sketchy. If you have an account through pecron this app says it doesn’t exist.. hmm.. spyware? ### 1/5 — App no longer works *2026-04-08, version 1.9.2* Today I Opened app on iPhone. It wants my login credentials (email & password). I key them in, it crops up “user domain does not exist”. ### 1/5 — Can no longer login *2026-04-07, version 1.9.2* App won't let me login or even create a new account. ### 1/5 — App sucks *2026-03-12, version 1.9.2* Cannot register ### 1/5 — No usable functionality *2026-01-21, version 1.9.2* Can’t do anything with this app. Trying to get to settings or go back using the back arrow don’t work on my iPad. They are up too high and get covered by the date and time and the battery on the right. It’s frustrating and not worth the frustration. I can’t even get to settings. ### 1/5 — Very poor quality *2025-12-31, version 1.9.2* Only connects via WiFi, but supposedly has Bluetooth. Requires location data. Why would you make a power station that needs WiFi? Most power stations are used in area that are off grid and don’t typically have WiFi. In addition, the app doesn’t update the unit settings like it is supposed to. For a name-brand product this app is horrible, useless, and a poor representation of the company name. Abysmal failure. ### 1/5 — Pointless app *2025-12-19, version 1.9.2* I have the F3000LFP and it's awesome. This app is nothing but useless spyware in my opinion. You HAVE to connect it to Wi-Fi and submit your location to use it. Why? If the unit has Bluetooth there's no reason for the Wi-Fi setup other than to spy on you. I use the power station in my van where there's no Wi-Fi. I set it up once at someone's house. It worked one time away from the Wi-Fi. The next time I tried to use it, it wants Wi-Fi again. So really it's useless for me. Makes no sense. The power station itself is great. To bad there's not a useful app to go with it. ### 1/5 — Never ending binding error *2025-07-30, version pecron v1.8.1* Hours of messing around, trying every suggestion, following the instructions to the letter. Phone Bluetooth connects to the device. Let’s me scan the device , lets me give it network credentials. It connects to the network. And then the app on the iPhone can never successfully “bind” to the app. Tech-support says they can see it successfully connected to my network (that’s a little unnerving - privacy issues?). None of their suggestions have fixed the problem and their last suggestion was that I switch to an android phone!!! As far as I’m concerned, this app is trash and it makes my $3000 Battery back up system a very expensive paperweight. I am probably a day away from returning this unit. ### 1/5 — Doesn’t work *2025-07-12, version pecron v1.8.1* I’ve tried everything. I put in pairing mode in the settings. I allows all permissions. I made sure my phone and the pecron connect to a 2.4ghz only Wi-Fi network. The bluetooth works and it sets up wifi. The display on my pecron shows that it connects to wifi immediately after I start the connection process from the app. I get a solid WiFi connected icon. But the phone app never connects. It just says binding timeout. ## Most praised reviews (10 highest-rated) ### 5/5 — Retired Air Force *2026-07-31, version 1.9.2* Excellent ### 5/5 — E500 *2025-07-03, version pecron v1.8.1* The Pecron app is simple and connects easily to the power station. It gives you real-time battery info and basic controls. ### 5/5 — Pecron APP *2025-07-02, version pecron v1.8.1* Super easy to use and extremely helpful. ### 5/5 — Convenient *2025-06-28, version pecron v1.8.1* Now that i have E3600LFP hooked to my solar array, the app is great to monitor input / output levels throughout the day. Also helpful for tracking how much additional draw my freezers and air conditioner have with temp and humidity. Helps us decide what appliances to add / remove to insure we end solar day with nearly full batteries I would love to see an app for apple watch for quick info ### 5/5 — Buggy but worked *2025-04-05, version pecron 1.8* Had to type in WiFi name manually, WiFi auto selection didn’t work. Got it connected 2nd try. Apparently it’s a new app, I’m sure you can improve. For the price, it has some functions that more expensive brands like jackery or bluetti don’t have. Eg: The automation function. I only saw that in ecoflow. These 3 are more expensive brands. And it also let me change voltage and frequency, I never saw this in other brands Keep up the good work, I might want to buy the 3000wh extra battery ### 5/5 — Works great with E2400LFP *2025-01-13, version 1.7* Works great. Love that I can see my input, output, and battery percentage. A couple feature requests… It’s nice to be able to control the AC input current in 25% increments, but I wish there was a way to turn it down to 10% or even 5%. My truck has a built in inverter that maxes out at 400w. I’d like to use that, but at 25% the unit tries to pull 500w+. Another feature that would be nice is the ability to change the temperature units from Celsius to Fahrenheit. Other than those two things, the app does everything I want from it. ### 5/5 — E3600 *2024-12-28, version 1.7* This app does everything it was intended to do, works great monitoring my E3600. ### 5/5 — Works great so far *2024-12-10, version 1.7* Seems to work perfect so far. I followed the instructions and it was flawless with my 3600 ### 4/5 — Functional. Needs charts and graphs. *2025-07-21, version pecron v1.8.1* App does exactly what it’s intended to. Compared to other power station apps it’s not fantastic, but passable, I happily use it. There’s quite a bit of poor English and grammar. My biggest criticism though is that all the data is real-time only. I want to see hour by hour, month by month charts showing solar production, watt discharges, etc. Most other power station apps do this. The app is reliable though, which is most important. ### 4/5 — easy to use *2025-06-09, version pecron v1.8.1* It connected the first time I used it, the interface is simple and pretty good. --- *Data collected daily from the US App Store and indexed by [AppsHunter](https://appshunter.io/). User reviews are verbatim App Store reviews. Ratings, prices and chart positions refresh continuously; this snapshot is from 2026-08-31.*