# PipeBook: Pipefitter Reference — Pipe Takeoffs & Flange Charts > Pipefitter reference and field calculator with verified dimensions and offline functionality. (iPhone/iPad app by Aaron Peabody.) - Source: https://appshunter.io/ios/app/pipebook-pipefitter-reference/id6795305963 (this page in markdown: same URL + `.md`) - Developer: [Aaron Peabody](https://appshunter.io/developer/6795305965) - Category: Productivity, Reference - Price: $12.99 - Rating: 5.00/5 from 4 App Store ratings · 4 written reviews indexed - Age rating: 4+ - Requires: iOS 15.1 · 29 MB - Languages: American English - Released: 2026-08-06 - Data updated: 2026-08-30 - Monetization: paid - User reviews in markdown: https://appshunter.io/ios/app/pipebook-pipefitter-reference/id6795305963/reviews.md ## What is PipeBook? The pipefitter's pocket reference and field calculator. One purchase, no subscription, no account. Yours. REFERENCE: verified, not scraped Every dimension in PipeBook is extracted from two independent published sources, machine-compared, and hand-resolved against a third before it ships. The handful of values that haven't cleared that process are marked in the app, in plain sight, rather than quietly shipped. No guesses, no filler. • Pipe schedules (ASME B36.10M/B36.19M): wall, ID in decimals and 16ths, weight per foot. NPS 1/8 to 48, Schedule 5 through XXS • Fitting takeoffs (ASME B16.9): 90s and 45s (LR and SR), tees, concentric and eccentric reducers, caps, stub ends, 1/2 to 24 • Flanges (ASME B16.5, classes 150/300/600): OD, thickness, bolt circle, hub, length thru hub, plus the full bolt-up: stud count, diameter, and length (RF and RTJ) and B16.20 ring gasket numbers CALCULATORS: fraction-native, in 16ths • Rolling offset: set, roll, travel, run. Pick a pipe size and get the end-to-end cut length with the takeoffs and your welder's gap already subtracted • Cut a fitting: any angle out of a factory 90, with the heel, centerline and throat marks • Miter cuts: cut angle, cutback, heel-to-throat drop, segment lengths • Parallel offset: equal-spread runs through any turn • Feet & inches: running tape math that accepts 3' 4 1/2 and never loses a 16th BUILT FOR THE FIELD • Works completely offline. No license checks, no sign-in, nothing to time out in a basement or on a pipeline right-of-way • Send the welder the cut: the text and a dimensioned diagram, straight out of the calculator, with the gap it assumed printed on the drawing • Type "6 90" and get the 6-inch takeoffs. "6 150" gets the flange. • Pin your job's sizes; your recent lookups stay one tap away • Screen stays awake while a table is open • Big targets that work with gloves on No ads. No subscription. No accounts. Features never move behind a paywall. Built in the U.S.A. by one developer who answers email. ## Key features - Verified pipe dimensions - Fitting takeoff calculations - Flange data and bolt-up - Rolling offset calculator - Miter cut calculations - Offline functionality - Fraction-native calculations ## Chart rankings - #75 in Top Paid · Productivity (US App Store) ## Recent user reviews (4 of 4) All indexed reviews: https://appshunter.io/ios/app/pipebook-pipefitter-reference/id6795305963/reviews.md ### 5/5 — Productive, Awesome app!! *2026-08-13* Been in asphalt and utility work for years and always hated flipping through binders or digging through random PDFs on my phone. PipeBook is the first app that just gives me clean, fast answers on pipe sizes, specs, and data without the clutter. Interface is simple and fast. I can pull what I need in a couple taps even with gloves on. Accurate info, no ads, no nonsense. Already using it daily on jobs and it’s saved me real time. Worth every penny for anyone who deals with pipe on a regular basis. Developers clearly know the industry. Keep updating it. ### 5/5 — Finally a pipe reference that actually works in the field *2026-08-11* Ive been looking for a clean, fast pipe data app for a while and this one hits the mark. Quick access to dimensions, weights, and common fittings without digging through old pdfs. Interface is straightforward and works well with gloves on already using it daily on asphalt and utility jobs worth a couple bucks saves time and reduces mistakes. ### 5/5 — Solid, works with no service *2026-08-08* Solid, works with no service Bought after seeing it on reddit. Ive got pipe trades pro and this is better for takeoffs honestly. Checked a bunch of the 6" numbers against my pocket pal, all good so far.  Wish the keypad was a little bigger. Im in vaults a lot so no service is the main thing for me. Worth 13. ### 5/5 — Super simple and intuitive *2026-08-07* This is so intuitive I wouldn’t have to teach grandpa how to use it. And it works off line so I don’t have to hold my dang phone over my head just to get some signal. And finally someone is sensible enough to stop with the subscriptions buy once and it’s yours. **Developer response:** Thank you so much for my first review…ever! I couldn’t have asked for a better one. I’m glad you like it. ## Frequently asked questions about PipeBook ### What pipe dimensions does PipeBook provide? PipeBook provides verified dimensions for pipe schedules (ASME B36.10M/B36.19M) including wall thickness, ID in decimals and 16ths, and weight per foot for NPS 1/8 to 48, Schedule 5 through XXS. ### Can I use PipeBook offline? Yes, PipeBook is built for the field and works completely offline. It does not require a signal, license checks, or sign-in, ensuring it's always accessible. ### What types of fittings and flanges are included in PipeBook? PipeBook includes data for ASME B16.9 fittings like 90s and 45s (LR and SR), tees, reducers, and caps from 1/2 to 24 inches. It also covers ASME B16.5 flanges (classes 150/300/600) with OD, thickness, bolt circle, and hub dimensions, plus bolt-up details. ### Does PipeBook have ads? No, PipeBook is ad-free. The app explicitly states 'No ads. No subscription. No accounts.' ensuring an uninterrupted user experience. ### How accurate is the data in PipeBook? All dimensions in PipeBook are extracted from two independent published sources, machine-compared, and hand-resolved against a third before release. Values that haven't cleared verification are clearly marked. ### What are the calculator features in PipeBook? PipeBook includes fraction-native calculators for rolling offsets, miter cuts, parallel offsets, and feet & inches measurements, all designed to work with 16ths. ### What devices does PipeBook support? PipeBook is available for iPhone and iPod devices. It is designed with large targets that work with gloves on, making it practical for field use. ### How often is PipeBook updated? The latest version of PipeBook is 1.0.1, last updated on August 8, 2026. The app is developed by Aaron Peabody, who answers email, suggesting a responsive developer. ## Version history (last 3 releases) ### 1.0.2 — 2026-08-11 The welder's gap now defaults to 1/16″ instead of no gap, because a butt-welded fitting has a root opening and the old default quietly made every cut a little long. Shared cut lengths now state the gap they assumed, right on the diagram. Thanks to the piping engineer on r/pipefitter who made both cases. ### 1.0.1 — 2026-08-08 Housekeeping release. No dimension or calculator result has changed. If PipeBook has been useful on the job, there is now an easy way to leave a review. Accuracy reports still jump the line: pipebooktheapp@gmail.com ### 1.0 — 2026-08-06 No release notes. --- *Data collected daily from the US App Store and indexed by [AppsHunter](https://appshunter.io/). User reviews are verbatim App Store reviews. Ratings, prices and chart positions refresh continuously; this snapshot is from 2026-08-30.*