# PipeFitAR: Pipefitter Layout — AR Cut List & Fitting Takeout

> AR Cut List & Fitting Takeout (iPhone/iPad app by Unitus LLC.)

- Source: https://appshunter.io/ios/app/pipefitar-pipefitter-layout/id6831852839 (this page in markdown: same URL + `.md`)
- Developer: [Unitus LLC](https://appshunter.io/developer/6789259982)
- Category: Utilities, Productivity
- Price: Free
- Age rating: 4+
- Requires: iOS 18.0 · 2 MB
- Languages: American English
- Released: 2026-11-13
- Data updated: 2026-11-16

## What is PipeFitAR?

Aim, tap, and PipeFitAR turns a pipe run into a cut list — take-outs and weld gaps already subtracted.

Point the crosshair at the wall, ceiling or rack where the pipe goes and drop a point at each centerline change. PipeFitAR builds the run in AR, works out center-to-center for every leg, and gives you cut lengths for the fittings you picked.

CUT LIST, NOT JUST A TAPE
• Cut = center-to-center − fitting take-out − weld gap, per leg
• ASME butt-weld elbows 1/2"–12" NPS: 45 LR, 90 LR or SR, and 90s cut to any angle
• Tees, reducers, weld-neck and slip-on flanges (150# and 300#), gaskets and bolt sets
• Socket-weld and threaded take-outs, couplings on straight runs (up to 2")
• Pipe can sit tight to the surface, at a set standoff, or on an existing pipe's centerline

HONEST ACCURACY
• Run 3 or more tape tests and PipeFitAR learns how far off your phone reads
• Every cut shows its ± so you know which ones to tape before cutting
• Tap any cut to type the real tape C-C; a tape pass walks you through the untaped ones
• Snap to level, plumb and 45° with a haptic tick when it locks

ON THE JOB
• Walk-out: run / roll / rise from the last mark, with check-offs
• Iso sketch with C-C dims and fittings — share it as a picture
• Material list: pick 20', 21', 24' or 40' joints, enter drops on hand and they get used first
• Save jobs by name. With the room scan saved, the run snaps back into place when you come back
• Flashlight button for dark mechanical rooms; screen stays awake

PRIVATE BY DESIGN
No account, no ads, no tracking. Everything stays on your iPhone.

AR gets the shape; your tape gets the numbers. Measurements are estimates — verify every cut with a tape before cutting or welding. Works best on iPhone Pro models with LiDAR.

Questions or a fitting you need added: support@unitus.dev

## Is PipeFitAR safe?

Not enough ratings yet to assess PipeFitAR.

## Is PipeFitAR legit?

PipeFitAR: Pipefitter Layout has limited verification signals. The AppsHunter Legitimacy Score for PipeFitAR is 58 out of 100 points across 7 verification signals from App Store and developer data.


## Version history (last 2 releases)

### 1.0.1 — 2026-11-15

Use your own take-offs: in the cut list, open Fitting take-offs and type the 90, 45 and tee numbers from your supplier's catalog for each size and joint type. Leave one blank to keep the standard number.

After each update, a short card now shows what changed.

### 1.0 — 2026-11-14

No release notes.

---

*Data collected daily from the US App Store and indexed by [AppsHunter](https://appshunter.io/). User reviews are verbatim App Store reviews. Ratings, prices and chart positions refresh continuously; this snapshot is from 2026-11-16.*
