# PlanTape: Blueprint Measure — Measure floor plans to scale

> Measure floor plans to scale (iPhone/iPad app by Lakeborne Labs Oy.)

- Source: https://appshunter.io/ios/app/plantape-blueprint-measure/id6783002100 (this page in markdown: same URL + `.md`)
- Developer: [Lakeborne Labs Oy](https://appshunter.io/developer/1889454221)
- Category: Productivity, Utilities
- Price: Free with in-app purchases
- Age rating: 4+
- Requires: iOS 26.0 · 19 MB
- Languages: American English, Czech, Danish, Finnish, French (France), German (Germany), Italian, Norwegian Bokmål, Polish, Slovak and 2 more
- Released: 2026-09-22
- Data updated: 2026-11-18

## What is PlanTape?

You measure from the corner, not from somewhere near it. So does PlanTape. Ten seconds from opening the PDF to a dimension you would put your name to.

HOW DOES IT KNOW THE SCALE?
The same way you would: it reads the dimensions the designer printed on the sheet, or the scale noted on it, and sets the scale from them as the plan opens. The scale card is tagged Auto; tap it and it shows you what it went by, so you can judge it yourself.

WHAT IF THE SHEET HAS NO DIMENSIONS?
Trace one you know, type its length, and the sheet is to scale. The way you would check a print with a scale rule, without the rule.

WHAT DOES THE TAPE SNAP TO?
The points a tradesperson actually measures between: corners, line ends and the crossings of the drawing's own lines. Tap near a corner and the point takes it. On a busy sheet, drag: a magnifier shows the cursor pulling onto the line, and a tick tells your hand it has landed.

WHAT CAN I MEASURE?
• Runs, point to point, every segment labelled and a running total
• A length on the fly, without leaving a mark
• Areas, rectangles or free shapes, with side lengths
• In millimetres and metres, feet and fractional inches, or the way the plan writes its own dimensions

CAN I CHECK THE BUILD AGAINST THE PLAN?
Yes, the way an inspector does. Name a measurement, give it the nominal size and a tolerance, and read PASS or FAIL.

CAN I MARK IT UP?
Freehand, arrows, rectangles, ellipses and sticky notes, in your colour and line width. Arrows, shapes and notes snap to the same lines the tape does, so an arrow points at the corner, not beside it.

WHERE DO MY PLANS GO?
Nowhere. Every PDF you open stays in a library on your phone with its measurements and notes, sorted into projects and tags, revisions of the same drawing grouped together. None of it is uploaded. The app sends pseudonymous usage counts (feature counts and approximate location) to help improve it; switch them off in Settings → About → Privacy.

CAN I HAND IT ON?
Export a flattened PDF with your marks burned in, an image, or a take-off summary as CSV or a one-page PDF, through the share sheet.

WHAT ABOUT MULTI-PAGE SETS?
Each page keeps its own scale, and a review table shows which pages are set, unsure or scanned.

WILL THE SCREEN GO DARK MID-MEASUREMENT?
No. It stays awake while a plan is open.

DOES IT WORK IN THE BASEMENT?
No signal, no account, no cloud. It works where plans get read.

WHAT ABOUT SCANNED PLANS?
They open too. Set the scale yourself and measure freely. Snapping and automatic scale need a vector PDF, the kind exported from CAD, because that is where the lines are.

WHO IS IT FOR?
Anyone with a plan and a question. On iPhone and iPad.

Measurements come from the drawing's own lines and the scale you set. Treat them as a working aid, as you would any print, and check critical dimensions on site.

A small team, listening. Tell us what's missing: Settings → About → Send feedback.

Terms of Use: https://www.apple.com/legal/internet-services/itunes/dev/stdeula/

## Pricing and in-app purchases

Base price: Free.

**Subscriptions**

| Subscription | Price | Period |
| --- | --- | --- |
| PlanTape Pro (yearly) | $19.99 | per year |

**One-time purchases**

| Purchase | Price | Type |
| --- | --- | --- |
| PlanTape Pro (one-time) | $49.99 | one-time |


## Is PlanTape safe?

Not enough ratings yet to assess PlanTape.

## Is PlanTape legit?

PlanTape: Blueprint Measure appears legitimate, with a few gaps. The AppsHunter Legitimacy Score for PlanTape is 65 out of 100 points across 7 verification signals from App Store and developer data.


## Version history (last 5 releases)

### 1.5 — 2026-11-14

This update brings projects and folders to the library, marks overlays for each trade on one plan, and several scales on one page.

PlanTape now has Pro. If you used PlanTape before this update, Pro is already yours, for good. No purchase needed. Thank you for being one of the first.

• PlanTape Pro: automatic scale beyond your first five plans, plan layers, several scales on one page, the take-off export and shares without the PlanTape footer. Choose a yearly plan, with a 7-day trial, or a one-time purchase.
• Projects: put plans into projects, with folders inside them. When you move a plan, PlanTape offers to move the plans that belong with it. It finds them from the same import, the same site in the title block, or doors that line up. A project can be deleted with or without its plans, and Undo brings it back.
• A calmer library: the list stays put when you come back from a plan, plans are grouped by project with No project first, and the Not organized filter shows plans with no project and no tags. You can tag many plans at once.
• Marks overlays: give a set of measurements and comments a name, such as Electrical or Tiling, and switch between them at the top of the plan. When you share, tick the overlays to send. Marks can be moved or copied to another overlay.
• Several scales on one page: draw a scale area around a detail drawn at its own scale and set its scale. Colour by scale tints each scale so you can see which one applies where.
• US scales: on plans in feet and inches, the Scale card offers 1/8, 3/16, 1/4 and 1/2 in = 1 ft and 1 in = 20 ft with one tap.
• Measuring: hold or swipe the folded Tape button to pick another measuring tool. The title bar and the tools now show and hide separately.
• Tools: the Tape button keeps your last tool, and the area tools sit in its menu. Pointers stay with the plan and can be hidden and shown again.
• Automatic help: Settings → Automatic help lets you choose what PlanTape does by itself: project suggestions, version groups, turning sideways pages, automatic scale and scale help.
• Plan layers suggest fewer wrong matches.

### 1.4 — 2026-11-05

This update reads the scale on more European plans, writes your measurements the way the plan writes its dimensions, and opens every plan ready to measure. PlanTape is now also available in ten more languages.

• Ready to measure: a plan now opens with the tools folded into two round buttons, Tape and a menu button that brings back the rest of the tools. Tap Tape and start measuring straight away. While there's something to undo, Undo sits above them.
• Same as plan: a new option in Settings → Units, now the default. Measurements you add use the plan's own unit, decimals and decimal mark, in the readout, on the plan and in what you share. When a plan doesn't show its units, your usual units are used. If you chose a unit yourself, it stays.
• Automatic scale on more drawings: PlanTape now reads the scale notation used on European plans, graphic scale bars, scales listed in the title block, and dimension lines that end in dots, circles, filled arrows or long slashes. Plans already in your library get their automatic scale read once more; scales you set yourself stay as they are.
• Ten more languages: German, French, Spanish, Italian, Swedish, Norwegian, Danish, Czech, Slovak and Polish.
• Lining up plan layers by hand: each point you place shows a close-up bubble, so you can see exactly where it landed.
• Import: the library's import button is now a round + in the bottom-right corner.
• Feedback: Settings → About now has Send feedback, Suggest a feature and Rate PlanTape.

### 1.3 — 2026-10-26

This update turns sideways pages upright, lets you keep a checked scale with one tap and reads the scale on more drawings.

• Sideways pages: the new Rotate page button at the top turns the page you're on a quarter turn. When a page opens sideways, PlanTape offers to turn it upright, and can turn the file's other sideways pages too. You measure on a turned page as usual, and a share shows the page the way you see it.
• Check scale: when the scale PlanTape measured is right and the one printed on the sheet isn't, tap Keep 1:N on the scale card. The card says what to check before you keep it.
• Automatic scale works on more drawings: dimension lines that end in arrowheads, running dimensions, and dimensions drawn in grey. Plans already in your library get their automatic scale read once more; scales you set yourself stay as they are.
• Fixes: a tap made before a page's snap points were ready could place a point that didn't snap, a measurement could be saved on the neighbouring sheet, Re-trace could bring back the old line, and a scale saved by a CAD program could be read in the wrong unit. Undo now takes you to the page the change was on. Jumping to a page from the page grid keeps that page, and the "Rendering page" note no longer stays on screen.

### 1.2 — 2026-10-22

This update reads the scale on many more drawings, adds a freehand area and makes the toolbar work like other iOS apps.

• Automatic scale works on many more plans: dimension lines that end in bars or steep slashes, AutoCAD drawings whose text didn't read before, the scale a CAD program saves in the PDF, and drawings whose numbers are drawn as lines. While a plan is read, its scale badge shows Checking…
• Fewer wrong automatic scales, and Check scale now only flags a gap of more than 5 % from the printed scale.
• If typed ratios keep missing, PlanTape suggests tracing a length you know, and you can email us the plan so we can look into it.
• Freehand area: under Area, draw round a room or a patch with one finger. Its holes are drawn the same way.
• Toolbar: tap a tool to start and tap it again to stop. Switch tools with one tap, and touch and hold Tape, Area or Comment for its options. Tap the plan to show or hide the toolbars. On iPhone, Share is now at the top right.
• Plan layers: tick several plans and add them at once. The list shows which ones line up automatically and puts them first. Lining up by hand is easier to follow, and you can drag the four points before the plan is lined up.
• Fixes: a PDF opened from Gmail or Google Drive no longer fails as password-protected, tapping a link on a plan no longer moves the view, and tapping numbers while measuring no longer offers to call them.

### 1.1 — 2026-10-11

This update adds plan layers and a layout made for iPad.

• Plan layers: lay the electrical or plumbing plan, or an older revision, over the plan you have open. PlanTape lines them up automatically, and the tape lands on their lines too. Turn layers on and off at the top of the toolbar.
• iPad: a layout for the bigger screen, with a thumbnail library, a magnifier that keeps out of your finger's way and a visible pulse when a point locks.
• Share just what's on screen with This view, or the whole sheet. Image shares are much sharper, shared copies keep the plan's own clouds and stamps, and an old revision is marked SUPERSEDED.
• Snapping locks onto crossings at any angle and onto line ends more reliably.
• Numbers follow your region's format, and a new install starts in your region's units.
• A one-time note explains the usage statistics the app sends. Crash reports stay on your device unless you send them from Settings → About.
• Better VoiceOver support and many smaller fixes.

## Apps similar to PlanTape

| App | Rating | Price | Category |
| --- | --- | --- | --- |
| [PlanMeasure](https://appshunter.io/ios/app/planmeasure/id6769869930) | — | Free | Productivity |
| [PlanBridge: Measure PDF Plans](https://appshunter.io/ios/app/planbridge-measure-pdf-plans/id6775060555) | 5.0 (11) | Free | Productivity |
| [10Pro](https://appshunter.io/ios/app/10pro/id963042502) | — | Free | Productivity |
| [PlanMeasure Takeoff](https://appshunter.io/ios/app/planmeasure-takeoff/id6774063717) | 5.0 (3) | Free | Productivity |
| [AR Tape Measure: Ruler & Scan](https://appshunter.io/ios/app/ar-tape-measure-ruler-and-scan/id6796245152) | — | Free | Productivity |
| [NextCAD — DXF Viewer](https://appshunter.io/ios/app/nextcad-dxf-viewer/id6813024001) | — | Free | Productivity |

## More apps by Lakeborne Labs Oy

- [QuietScore - Soundproof Test](https://appshunter.io/ios/app/quietscore-soundproof-test/id6761410662)
- [Hushlight: Indoor Voice](https://appshunter.io/ios/app/hushlight-indoor-voice/id6822743292)

All apps by Lakeborne Labs Oy: https://appshunter.io/developer/1889454221

## Related topics

[ipd measure](https://appshunter.io/ios/topics/ipd-measure) · [property measurements](https://appshunter.io/ios/topics/property-measurements) · [measure pm](https://appshunter.io/ios/topics/measure-pm)

---

*Data collected daily from the US App Store and indexed by [AppsHunter](https://appshunter.io/). User reviews are verbatim App Store reviews. Ratings, prices and chart positions refresh continuously; this snapshot is from 2026-11-18.*
