# Platewrap — Duct patterns you can print

> Duct patterns you can print (iPhone/iPad app by Ashton Stewart.)

- Source: https://appshunter.io/ios/app/platewrap/id6828386275 (this page in markdown: same URL + `.md`)
- Developer: [Ashton Stewart](https://appshunter.io/developer/6828386277)
- Category: Utilities, Productivity
- Price: Free with in-app purchases
- Age rating: 4+
- Requires: iOS 17.0 · 31 MB
- Languages: American English
- Released: 2026-11-11
- Data updated: 2026-11-18

## What is Platewrap?

Four fittings have to be marked out by hand in a duct shop, and each one is a different drawing problem. Platewrap is a bench tool for those four. You type the sizes of the fitting in front of you, it develops the pattern, and it prints that pattern at full size on A4 so you can lay the paper on the sheet and scribe round it.

The taper between two round ducts

Developed as a sector of a ring. You get the slant length, the sector angle, the inner and outer swing radii to set the compass or the trammel, and a table of chords measured from the seam. Offset the two axes and the fitting becomes an oblique cone: the app switches to a triangulated development and gives the true length of every element, because on an offset taper no two elements are the same length.

The square-to-round boot

Built the way it is built on the bench: four flat triangles that meet the sides of the rectangle, four gores that round off the corners. The circle is divided into 12, 16, 24, 32 or 48 parts, every true length is listed, and the triangles are laid in order so the pattern closes on the seam instead of nearly closing.

The gored elbow

Split into gores by the angle of turn and the number of gores. You get the turn at each joint, the miter angle to set on the shear, the throat and heel lengths, and a separate pattern for each gore, the two half gores at the ends included.

The angled pipe cut

Developed by ordinates: the stretch-out along the square end, and the height of the cut at every station, so the curve is marked by measuring up from a straight line rather than guessed.

Metal thickness is taken on the mean line. Enter 0.7 mm and the blank grows by pi times the thickness, which is the length the metal actually needs, not the inside circumference. Sizes go in as millimetres or inches, and the seam allowance is reported beside the figures.

From the screen onto the metal

The template prints at 1:1, tiled across as many A4 sheets as the pattern needs. Every sheet carries a check bar exactly 100 mm long. Measure it on the paper first: printer drivers scale pages by default more often than not, and the bar is how you catch it before any metal is cut.

Neighbouring sheets overlap by 10 mm, with a glue line and a label naming the sheet that goes underneath, so a wide pattern assembles in the right order. Corner crop marks sit on every page. A title block carries the name you gave the detail, the fitting type, the thickness, the seam allowance, the number of divisions, the sheet code and the date, so a pattern found on the bench next week still says what it is. A key sheet comes first with the figures and the sheet grid, and the marking table can print as a page of its own.

Where it stops

It does not know your metal, your folder, your seam type or the code you work to. It reports the seam allowance and never draws it into the outline, because how much you need depends on how you are closing the joint. It is not a nesting program and not a CAD viewer: one fitting at a time, developed and printed.

It works offline, because there is nothing for it to connect to. No account, no sign-in, no network requests, nothing collected, nothing sent.

Free, and what Pro adds

All four fittings, the full development with dimensions, the marking table, the A4 layout and printing the current detail at 1:1 are free, and they stay free. The free version keeps three saved details.

Pro is one purchase, not a subscription. It lifts the limit on saved details, writes the template out as a PDF file, adds the standard duct size library in metric and inch, and adds a print theme without the sheet frame for less toner. Details you have already saved are never taken away.

A paper trial of an unfamiliar fitting costs a sheet of card and ten minutes. The geometry here is standard descriptive geometry and it does not drift, but the piece on your bench is yours to check.

## Pricing and in-app purchases

Base price: Free.

**One-time purchases**

| Purchase | Price | Type |
| --- | --- | --- |
| Platewrap Pro | $1.99 | one-time |


## Is Platewrap safe?

Not enough ratings yet to assess Platewrap.

## Is Platewrap legit?

Platewrap has limited verification signals. The AppsHunter Legitimacy Score for Platewrap is 58 out of 100 points across 7 verification signals from App Store and developer data.


## Version history (last 2 releases)

### 1.1.1 — 2026-11-17

From flat patterns to workshop-ready estimates.

This release introduces two practical tools for sheet metal planning.

STOCK SHEET & WEIGHT
Calculate the weight of a finished piece, determine the required rectangular blank, and see how many blanks fit on a metal sheet. Review material utilization and a scaled cutting layout.

JOB TICKET
Combine saved details into a single workshop order. Specify quantities and calculate total weight, cutting length, required sheets, and remaining offcuts. Copy the finished summary to share with your team.

We've also refreshed the app icon and made improvements to analytics integration.

### 1.0.0 — 2026-11-11

No release notes.

## More apps by Ashton Stewart

- [Nestcut](https://appshunter.io/ios/app/nestcut/id6828386425)

All apps by Ashton Stewart: https://appshunter.io/developer/6828386277

---

*Data collected daily from the US App Store and indexed by [AppsHunter](https://appshunter.io/). User reviews are verbatim App Store reviews. Ratings, prices and chart positions refresh continuously; this snapshot is from 2026-11-18.*
