# Protoboard: PCB Design & CAD — Circuit Board Layout & Gerber

> Circuit Board Layout & Gerber (iPhone/iPad app by Protoboard Designer Korlatolt Felelossegu Tarsasag.)

- Source: https://appshunter.io/ios/app/protoboard-pcb-design-and-cad/id6799526213 (this page in markdown: same URL + `.md`)
- Developer: [Protoboard Designer Korlatolt Felelossegu Tarsasag](https://appshunter.io/developer/1095600199)
- Category: Graphics & Design
- Price: Free with in-app purchases
- Age rating: 4+
- Requires: iOS 15.0 · 55 MB
- Languages: American English
- Released: 2026-09-13
- Data updated: 2026-11-15

## What is Protoboard?

Design a real circuit board on your iPhone or iPad, see it in 3D, and send it to a fab or etch it at home.

Protoboard Designer is a PCB layout editor made for touch. Place parts from a library of 6,000+ real footprints, draw copper tracks with your finger, pour a ground plane, check it with DRC, and export Gerber files any PCB manufacturer accepts. No schematic required: what you draw is what gets made.

WHAT YOU CAN DO
• Lay out single- and double-sided boards with tracks, pads, vias, text and cut-outs
• Place 6,000+ footprints: ESP32, RP2040, ATmega, 74-series logic, connectors, sensors, modules
• Autoroute airwires, add teardrops and a copper ground pour
• Check clearances and widths with the design rule check (DRC)
• See the board in 3D in its solder mask colour and finish before you order
• Export Gerber and Excellon drill files for JLCPCB, PCBWay, OSH Park or any fab
• Print a mirrored PDF for toner transfer or UV exposure and etch the board at home
• Open boards from KiCad, Eagle and Sprint Layout, and import KiCad footprint libraries
• Sync every project between iPhone, iPad and the browser at protoboarddesigner.com
• Works offline; your boards save on the device and sync when you are back online

MADE FOR
• Makers building a custom shield, sensor board or controller
• Students learning how a circuit becomes a circuit board
• Hobbyists moving a breadboard or perfboard circuit to a real PCB
• Engineers who want to check or tweak a layout away from the desk

FREE TO START
Design, check, view in 3D and export PDF and images for free. Maker and Engineer plans add more cloud projects, custom footprint libraries, Gerber export and full KiCad and Sprint Layout project import. Subscriptions renew automatically until cancelled; cancel any time in your Apple ID settings.

The boards in the screenshots are open-hardware designs: the CNC shield is derived from the SB CNC Shield by staticboards, after Protoneer's CNC Shield (CC BY-SA 3.0); the round board from the LilyPad Arduino USB by SparkFun Electronics (CC BY-SA); the Mega-size and Uno-size boards from Arduino's reference designs (CC BY-SA).

Terms of Use (EULA): https://protoboarddesigner.com/terms-of-service.html
Privacy Policy: https://protoboarddesigner.com/privacy-policy.html

## Pricing and in-app purchases

Base price: Free.

**Subscriptions**

| Subscription | Price | Period |
| --- | --- | --- |
| Maker | $5.99 | per month |
| Engineer | $12.99 | per month |


## Is Protoboard safe?

Not enough ratings yet to assess Protoboard.

## Is Protoboard legit?

Protoboard: PCB Design & CAD has limited verification signals. The AppsHunter Legitimacy Score for Protoboard is 58 out of 100 points across 7 verification signals from App Store and developer data.


## Version history (last 5 releases)

### 1.15.1 — 2026-11-14

• 2,600+ more footprints from KiCad's library: pin headers and sockets in every pitch, JST, Molex and other connectors, terminal blocks, relays, displays, RF modules, switches and crystals. More than 6,000 in all, downloaded in the background.
• Search shows our own footprints first, and a KiCad footprint name such as PinHeader_1x06_P2.54mm_Vertical finds the footprint we ship for it.
• Fixed crashes: the 3D view of a long, narrow board, drawing a track with a finger, and closing an export panel.
• Fixed freezes: importing an SVG with thousands of shapes, a coil with a very long turn count, and autorouting a dense board.
• Fixed: email sign-in when an earlier sign-in had left a session on the device.

### 1.15.0 — 2026-11-12

• A new footprint library that keeps your place: each folder is a page, and Back goes up one folder. Search puts the best match first, and a long list can be narrowed to THT, SMD, a pin count or a pitch.
• My footprints sits beside the library, and one search covers both.
• The part you picked takes one slim bar, which opens into a drawing you can zoom, with its size and pin numbers.
• Edit inside a group or a footprint without ungrouping it: double-tap it, or choose Edit group contents. Undo keeps everything in its group.
• New footprints, including the AD620, CC1101, IR2110, W25Q512JV and the STM32 Black Pill. The Blue Pill now fits a real Blue Pill.
• Fixed: some tracks would not take a new breakpoint, and Check for updates said the library was up to date when it needed a newer app.

### 1.14.5 — 2026-11-09

• Every plan limit now shows the way past it. The locked timelapse watermark, the pinned-exports limit and the warning that a new export will replace an older one now open the plan that lifts the limit.

### 1.14.4 — 2026-11-05

• Working offline is shown calmly, and only when the server has stayed silent for a while. One slow request no longer puts up a "can't reach the server" alarm.
• An info button beside Teardrops shows what a teardrop does on a real board, and how to add one.
• You can keep ten of your own footprints on the free plan, up from five. A plan's chip in a tool now opens that plan.
• Saving is safer. Work on one board never lands in another, a change from another device is shown while you edit, steady editing reaches the cloud within two minutes, and leaving a board no longer waits on a stuck save.
• Deleted stays deleted, restored stays restored. A board deleted for good without a connection no longer comes back, a board restored meanwhile is never deleted by the 30-day clean-up, and the public links of deleted boards are turned off.
• The toner transfer presets mirror the top copper, not the bottom. A board made from either had every chip wired as its mirror image.
• Keepouts keep tracks and vias out: autoroute and via stitching go around them, and the design rule check looks inside them.
• A duplicated track stays with the duplicated pads, and a track and a pad on different layers are no longer connected.
• A field you only tapped into keeps its value, a position can be anywhere on the board in your unit, and the design rules take mil or mm.
• The design rule check points at the defect, says what it found, says when a check could not run, and passes a size exactly at its limit.
• A full cloud says so before you start, and offers to keep the board on this device instead.
• Moving a board to Deleted can be undone, and Duplicate and 3D view are on a board's menu.
• A finger can select a thin track, exported images print at their real size, and the coordinate keypad has a minus key.
• More of the app speaks your language, numbers use your language's decimal sign, and long texts fit small phones.

### 1.14.2 — 2026-11-01

• Long editing sessions are saved to the end. After the 200th change in one visit to a board, every later edit was drawn but never saved. An exact angle typed after turning a selection is now saved too.
• Edits are saved again after the app reconnects. When the app confirmed your sign-in late (on a slow connection, or after opening without one), or another device's change arrived while you were editing, every edit after that was drawn but never saved, and was gone the next time the board opened.
• Deleted pads no longer come back after a phone call or an app switch, pads you changed no longer go back to their old shape, and a group made after an Undo is no longer saved empty.
• A pad placed on the end of a track stays locked to it, and Unlock in the locked-track dialog sticks once the board is saved.
• A Done key for the iPhone's number keyboard: a bar above it has Done, arrows to the previous and next field, and a ± key wherever a value can be negative. Tapping outside a field, or scrolling the panel, also applies the value and puts the keyboard away.
• Starting an airwire from a pad lights up the airwires it already has, so you can see which one to draw again to remove it.

## Apps similar to Protoboard

| App | Rating | Price | Category |
| --- | --- | --- | --- |
| [PCBAtlas](https://appshunter.io/ios/app/pcbatlas/id6759897822) | 5.0 (3) | Free | Graphics & Design |
| [3D Box Maker](https://appshunter.io/ios/app/3d-box-maker/id6813031260) | — | Free | Graphics & Design |
| [KiCAD PCB Viewer](https://appshunter.io/ios/app/kicad-pcb-viewer/id6450205342) | 1.0 (3) | $1.99 | Graphics & Design |
| [KiCAD Schematic Viewer](https://appshunter.io/ios/app/kicad-schematic-viewer/id6740265241) | — | $2.99 | Graphics & Design |
| [Quick3DModeling - CAD & Sculpt](https://appshunter.io/ios/app/quick3dmodeling-cad-and-sculpt/id6795848977) | — | Free | Graphics & Design |
| [Khmer Angkor](https://appshunter.io/ios/app/khmer-angkor/id6443515435) | — | Free | Graphics & Design |

## Related topics

[circuit design board](https://appshunter.io/ios/topics/circuit-design-board) · [pcb code](https://appshunter.io/ios/topics/pcb-code)

---

*Data collected daily from the US App Store and indexed by [AppsHunter](https://appshunter.io/). User reviews are verbatim App Store reviews. Ratings, prices and chart positions refresh continuously; this snapshot is from 2026-11-15.*
