# Prusa — user reviews > 100 indexed App Store user reviews of Prusa by Prusa Research a.s., rated 3.95/5 from 104 ratings. - Source: https://appshunter.io/ios/app/prusa/id6477531937/reviews - App overview in markdown: https://appshunter.io/ios/app/prusa/id6477531937.md - Rating breakdown: 5★ 51 · 4★ 9 · 3★ 7 · 2★ 8 · 1★ 14 ## What do users think of Prusa? **Pros** - 🔔 Push notifications for finished prints - 🔍 Ability to monitor printers and print status - 🌟 Overall great user experience and functionality **Cons** - 🐞 Bugs and glitches, including issues with offline printers - 📷 Lack of camera support and monitoring - 🔍 Suboptimal design for single-printer users - 🔧 Missing features compared to the website, such as file uploads and statistics ## Newest reviews (15 of 100) ### 3/5 — App will not send gcode files over *2026-06-18, version 1.14.3* When i try to send something to the printer it fails to send. Only workaround is downloading the gcode and going on browser to upload it ### 2/5 — So many issues *2026-06-07, version 1.14.3* Easy print is a lie. The app keeps freezing up and not intuitive how to set the materials. Why won’t it just autopopulate from my printer spools? I think I finally got something sliced in one color. Basically impossible to get multicolor working. ### 4/5 — Good App *2026-01-10, version 1.13.13* Functionality works well as does Printables integration Would like it to not send me a notification to check my printer every time I start a print though Also would love “Live Activities” integration so I could check print progress from my home screen. ### 4/5 — Good app works well *2025-12-31, version 1.13.13* Can’t access because it is restricted to 18+ ### 3/5 — Idea is there but needs polish *2025-12-05, version 1.13.13* I have Prusa printers at work and home on separate teams but I can’t see all my printers/teams. I have several complaints but no movement in months. I’m sure it will get fixed eventually but just sucks in the mean time ### 4/5 — Simplification Needed *2025-12-05, version 1.13.13* Need to merge “Prusa Connect” functionality into this app, all in one. Right now, I’ve gotta go between the two apps and they are different. Prusa should have ONE app that does it all. ### 4/5 — Es wird langsam! *2025-12-05, version 1.13.10* Nach dem letzten Update Ende November arbeitet die Prusa App deutlich schneller. Das Problem der falschen Druckerzustände ist behoben. Offline,Leerlauf, etc. werden nun richtig und zeitnah angezeigt. Ich bin gespannt, was Prusa 2026 noch verbessern möchte. Zutun gibt es noch sehr viel, damit diese App eine echte "Displayverlängerung" wird. ### 4/5 — Good but could be Great! *2025-11-29, version 1.13.3* This app has come a long way, but here are the things I’d still like to see addressed: - Overview - Allow the user to select a background for each printer. For example, I would choose live camera view. other options would be snapshot, or none. Obviously, the font color should adjust for contrast. - Tapping anywhere on a printer’s tile should open the Printer Overview section with data and the camera on that first page (see below). - Allow the user to select all available fields for smart display. For example, if I have a pause inserted, I always want to be able to see how long until the next pause. If no pause, I don’t need to see this. - Printer Overview - Remove the firmware. It’s already in the settings (gear icon) where it belongs - Allow the user to select all available fields for smart display. For example, if I have a pause inserted, I always want to be able to see how long until the next pause. If no pause, I don’t need to see this. - Swap the jobs displayed on the main page to Queue and put History on its own tab - Camera - Put the camera view on the main Printer Overview tab, but keep all camera settings under the gear icon for each camera where they belong. In its current form, I’m forced to see the camera settings I rarely change each time I view the camera. - Allow the user to set a priority and fallback chain when tapping to access the camera (e.g. live > snapshot > old > none). When I’m on my LAN, I always want a live view, so why make me tap the Play icon every time? - The orientation of the camera should always follow the device’s orientation. The rotation function should be a camera setting only in the gear settings section. - The camera view should automatically fill the screen in landscape orientation. - In full screen, Pinch to zoom is too sensitive to a single tap (i.e. it exits full screen too easily when starting a pinch gesture). - The Live overlay is nice, but it should also appear in full screen. - When I’m in full screen, I should be able to start live mode. - Make the icons on the right side (full screen, etc.) a little bigger. - Often, when I switch apps and return to the full screen camera, the screen is black, so I have to tap it to close and reopen it. - The Auto mode favors Night way too strongly. For starters, if the chamber is illuminated with the LED, Day should probably be active. - The camera mode icon overflows its container. - Other - Is remote control of the white LED possible? - Sometimes, I’ll start a print on my CORE One (direct or remote) and the app will tell me the printer needs attention, but no further details. When I walk over to the printer, nothing is wrong. ### 4/5 — Needs orientation rotation when viewing the camera, could use some other features *2025-11-22, version 1.13.3* App works very well but I am unable to get the camera feed to rotate landscape no matter which option is chosen for the camera feed. Would like to see this be able to utilize a status widget in Dynamic Island or on the lock screen for progress of print, maybe with a recent snapshot as well. ### 4/5 — Benachrichtigung / Notification *2025-11-05, version 1.11.6* It would be nice if you could not only mark notifications as read, but also delete them all. schön wäre, wenn man die Benachrichtigung nicht nur als gelesen markieren könnte, sondern auch alle löschen könnte ### 2/5 — Kind of annoying *2025-10-25, version 1.10.8* I go to open the app I sign in and then it said cannot open page after I log in and witch means I can’t use the app can someone please come and help me ### 3/5 — Zaseklé hodnoty tisku *2025-10-20, version 1.10.8* Několikrát se mi stalo že se údaje v aplikaci sekli a tiskarnu jsem musela připojit znovu třeba teplota trysky byla 180 stupňů ale tiskarna byla vypnutá nedalo se s tím nic dělat. Zkoušela jsem několikrát odinstalovat a stáhnout ale nepomohlo to. ### 4/5 — Support was great *2025-10-11, version 1.10.8* Support helped me fix my issue. Still wish the app had comparable settings as Prusaslicer ### 3/5 — App is good but… *2025-10-07, version 1.10.8* Why was the icon made to be extra bright when using dark mode? I hate it now. It does not follow the standards. I have all icons in dark mode except this app ### 3/5 — Frustrating *2025-09-29, version 1.10.8* A disappointing work-in-progress. Hides controls with no indication depending on how you hold your phone. Only partial functionality compared to website which is absolutely maddening, where did I see that option? I swear it was here, where did it go? Flakey, frustrating and confusing controls for camera. Printer must be on to use camera? Huh, it's external? "Camera is not connected" Huh, it's showing the feed? Connected how? It's cute but it's not a useful tool. ## Most critical reviews (10 lowest-rated) ### 1/5 — Never work *2026-04-18, version 1.13.28* Not found my printer. Profile page always something went wrong. Contacted support a month ago. Still the same. ### 1/5 — Pls fix the persistence for login *2026-01-28, version 1.13.13* Every time I want to use this I need to login… Why is life so complicated ? ### 1/5 — Cloud garbage *2026-01-21, version 1.13.13* I have to login just to control my printer? Just as terrible as Bambu Handy. At least Bambu doesn’t pretend to give user control over how they want to use their printer. Prusa completely lost its way. ### 1/5 — Si può migliorare *2025-12-31, version 1.13.13* Avete aggiunto diverse impostazioni per quanto riguarda lo slicer, non sempre compila il file da stampare, si blocca sempre alla fine. Ogni volta che chiudi e riapri l’app tocca impostare nuovamente il tipo di filamento ### 1/5 — . *2025-12-12, version 1.13.13* Falta optimizar mas la app ### 1/5 — BAD CANT PRINT *2025-10-11, version 1.10.8* you can’t even actually print from here and it doesn’t let you add multiple printers and you have to export it as a G code if you’re trying to print it through your phone ### 1/5 — Login Issues *2025-09-30, version 1.10.8* It will not let me log in, it says Safari cannot find the URL. I was really excited to use this app but I can’t. ### 1/5 — Useless *2025-07-10, version 1.9.0* There’s an issue with the built-in web portal, so account logins don’t work and therefore the app is completely useless ### 1/5 — R U kidding me? *2025-07-01* I just updated to 1.9.0 and now none of my printers are here. I will never upgrade again until a month after I have read all the newest reviews. **Developer response:** Thank you for your feedback. Can you contact us at app@prusa3d.com? ### 1/5 — Kind of disfunctional *2025-06-28, version 1.8.13* It took ages just figure how to load my local stl file on iPad into the app. Then I could not even figure out how to rotate the model or the viewport. I’ve been 3d printing with Prusa over over a decade and I can’t figure this out. Prusa can do better than this. ## Most praised reviews (10 highest-rated) ### 5/5 — great supplemental app *2026-06-08, version 1.14.3* works great on both iPad and macOS. fastest way to access print status and cameras across multiple printers. ### 5/5 — Good when used with Prusa Slicer *2026-05-25, version 1.14.1* I personally use this app as a supplement to Prusa Slicer (on my desktop). Being able to monitor my prints while away from my printer is quite nice. For this use case I’m quite satisfied. Occasionally I will slice directly off the app and I have found this to be acceptable. ### 5/5 — pretty great for simple use case *2025-12-26, version 1.13.13* For someone that just turned the printer on and logged in, this works great. I don’t have a camera and I slice from the browser or from my computer. With everything going through Connect, it “just works”. Main gripes so far are just to do with UX, like some buttons and interactions could be improved. Many tap targets are just too small for mobile, particularly the “set ready” and other print queue control UI. ### 5/5 — Must have app! *2025-12-05, version 1.13.13* I’ve been using the Prusa Connect app daily for months now and I honestly love it. It’s clean, reliable, and makes remote monitoring of my printers a breeze. The live camera feed is super helpful, upload speeds are fast, and the whole interface just feels polished and intuitive. It has genuinely improved my printing workflow and saved me countless trips to the printer. That said, there are three features that would make this app absolutely perfect for me: 1. Support for landscape mode on the buddy camera with pinch-to-zoom. When I’m checking details on a print, portrait orientation feels very limiting, and being able to zoom in would be a game changer. 2. Proper file management inside the app.The ability to move, delete, rename files and create new folders directly from the phone. Right now I still have to jump to the full web version for these basic tasks. 3. A manual “copy to printer” button for files that were uploaded while the printer was offline. I often prepare G-codes on my PC and send them to Connect in advance. When I later turn the printer on, the files unfortunately don’t transfer automatically, and the mobile app doesn’t let me trigger the transfer…I again have to open the desktop version. Adding this small button would be huge. Even without these features the app deserves 5 stars, but with them it would easily be the best printer companion app on the market. Huge thanks to the Prusa team for the great work so far. ### 5/5 — Simply works *2025-11-21, version 1.13.3* Easy access for Printables and Easy Print, I probably print as much from the app as I do from the PC! ### 5/5 — Abonador de correas no funciona *2025-11-17, version 1.13.3* Con la última actualización el afinador de correas dejó de funcionar en mi iPhone pro Max 14 ### 5/5 — App noch in den Kinderschuhen *2025-11-17, version 1.13.3* Update: Prusa hat es geschafft die App ordentlich zum laufen zu bringen. —— Die App ist leider noch nicht besonders ausgereift. In der Übersicht sieht man nicht den prozentualen Druckfortschritt der einzelnen Drucker. Die verbleibende Druckzeit wird auch falsch angezeigt. Diese liegt teilweise mehrere Stunden daneben. Einige Funktionen von Prusa Connect fehlen auch in der App. In der Connect App stimmt wenigstens die verbleibende Druckzeit. Daher ist es besser die App nicht zu nutzen sondern einfach Prusa Connect als Lesezeichen. —> Prusa, es wird Zeit, dass Ihr das in den Griff bekommt :D ### 5/5 — Does the job *2025-11-05, version 1.11.6* First time maker and loving it. The app makes it easy to keep a remote eye on status and (with the BuddyCam) what’s actually happening on the bed. Very good. ### 5/5 — Funguje bez problémů *2025-09-23, version 1.10.8* Funguje bezvadně. Nepoužívám pokročilé funkce ale bez problému se to spárovalo s tiskárnou a reaguje okamžitě na události typu tisk dokončen, potřeba výměny filamentu apod. ### 5/5 — Belt tuner molto migliore *2025-08-28, version 1.10.5* Questa versione risolve il problema del tool di taratura delle cinghie. Ottima! --- *Data collected daily from the US App Store and indexed by [AppsHunter](https://appshunter.io/). User reviews are verbatim App Store reviews. Ratings, prices and chart positions refresh continuously; this snapshot is from 2026-09-06.*