# Resin Control — user reviews > 21 indexed App Store user reviews of Resin Control by Pedro Soria Martinez, rated 4.00/5 from 21 ratings. - Source: https://appshunter.io/ios/app/resin-control/id6740918122/reviews - App overview in markdown: https://appshunter.io/ios/app/resin-control/id6740918122.md - Rating breakdown: 5★ 12 · 4★ 4 · 3★ 1 · 2★ 0 · 1★ 4 ## Newest reviews (1 of 21) ### 5/5 — It works! *2025-02-11* Kudos to the developer for making this app. It automatically searches for your local printer and connected with no issues. Gives useful UV temp, printer status, screen and release film usage stats, camera capture, print history and the ability to delete files. Excellent! ## Most critical reviews (10 lowest-rated) ### 1/5 — Trash *2026-06-23* This is a total waste did not get a single correct read on my printers after initially finding them. ### 1/5 — SDCP 3.0.0 Not Supported; App Doesn’t Work *2026-01-02* No where in the app description or store page does it mentioned that SDCP 3.0.0 isn’t supported. Whenever I try to add my Elegoo Saturn 4 Ultra 16k, all that ever happens in the app is “Loading SDCP 3.0.0 Status.” For an app that costs $5 outright, with no trial to see if it even works, this is a horrible way to find out. I have discovered this issue has been ongoing and unfixed for a month+ from other users reporting the same issues earlier this year. If you have a newer printer be weary. **Developer response:** Hi! There was a firmware update from the brand that cause the problem. The new update solve the issue. Sorry for the delay. I have to be sure the app didn’t show the problem again before any update ### 1/5 — Meh *2025-07-11* Definitely disgruntled with this app, since the update the camera is virtually useless, which, let’s be honest here, is the main reason for even downloading it. Fingers crossed for the next update **Developer response:** Hi! The camera don’t work in your device? Is there a problem with the floating camera or the Camera View? If you can send a message in resincontrol.com/feedback will help me to solve the problem. Thank you ### 1/5 — It works! *2025-02-15* This latest release hooked up to my Elegoo Saturn 4U. It can tell me when the print is finished! Since my printer is in a shop separate from my house this is handy. Nice to also see my FEP usage too. 2/14/25 Update: I can no longer get the app to connect to my printer. I entered the ip address and the connect button is enabled but does nothing. Sigh… **Developer response:** Hello! Thank you for your feedback! If the printer and the iPhone isn’t in the same local network, the app can’t see the printer. In settings should be active the local network too. If everything is active and correct, and your device is in iOS Beta, restarting the iPhone solve the issue. You can send more feedback to the email en the website resincontrol.com ### 3/5 — Good start *2025-01-28* Great idea but still needs work. Does not auto detect printers on your local network and does not allow for monitoring of multiple printers. App also crashes. iPhone 15 Pro Max. **Developer response:** Hi! The last version 1.0.4 support multiple Printers, and the auto detect sometimes don't detect the printer when there are a lot of devices in the network, but I'm solving the issue. Thank you for the feedback ### 4/5 — Does this still work? *2026-02-23* I just get a Loading SDCP forever. I have a Saturn 4 Ultra. Was great when it worked. ### 4/5 — Great app *2026-02-02* Great app but the time remaining format needs to be updated to HH:MM:SS so it’s easily understandable ### 4/5 — 1 feature missing for the 5th star *2025-08-17* Push notice on completion would put this over the top even if it’s local lan only **Developer response:** Hi! I'm working on a solution for it. Apple have restrictions (Android didn't) but I'm trying to implement a solution for the notifications. Thank you ### 4/5 — Stop complaining! *2025-02-24* I don’t know what some people are complaining about, this is what we have people. I haven’t seen anything Elegoo come out that’s any better, or rather, at all! Thank you so much for bringing this out. It would just be nice to have the video feed as well but this shows a TON of info about a current print. Keep up the good work! **Developer response:** Thank you for your kind words! I really appreciate your support. I'm actively working on future updates, and integrating the video stream from the camera is definitely in the top of the list. Stay tuned! ### 4/5 — Good so far *2025-02-02* Fantastic app and good start. Would like to see multiple printer support **Developer response:** Hi! The last version 1.0.4 support multiple Printers. Thank you for the feedback ## Most praised reviews (10 highest-rated) ### 5/5 — Funcional *2026-04-08* O app faz o que outros deveriam fazer mas não faz. Proporciona bom acompanhamento mas o tempo restante está faltando formatação. ### 5/5 — Amazing better than even the PC manager *2026-03-04* Idk how Chitubox hasn’t made this. Even their PC manager doesn’t have as much visibility. I couldn’t even add my printers by IP on chitubox manager and here I could, which is very important for functionality when you have multiple networks. You can start prints from here as well and it’s just intuitive. On top of that has the ideal model of pay once get everything. Rare to get such a good quality app that isn’t even the official app. ### 5/5 — Just works *2025-11-14* I don’t usually write app reviews but when I see how few this app has, I know I gotta help a dev out. This thing just works incredibly well, and I know I’d Elegoo came out with something for my S4U, it probably would be buggier. Being able to monitor my prints away from my workshop is exactly what I was looking for, and exactly what this does. Better than Chitubox on Windows by a mile. ### 5/5 — This is my first app review *2025-08-05* Thank you to whoever is bold and smart enough to make this happen. What a beautiful gift. You deserve the world. No notes. Keep delivering gold. **Developer response:** Thank you very much for your words! I'm so glad you like it! If you want or need more features or give me feedback, just text me in the website resincontrol.com ### 5/5 — Perfect app *2025-05-26* great app esp coming from bambu ecosystem nice to have a resin monitoring alternative wish there was live video feed but i’m sure there’s reason why not or it will come eventually **Developer response:** Thank you for your feedback! The next update will have live video and other new feature. ### 5/5 — Great…Doing the work that Elegoo should have done. *2025-04-08* Great app,thanks for it.For several times it save me time and resin.It was Elegoo’s duty but they prefer to release printers after printers instead of completing their ecosystem to bring quality of life for customers. I hope it can stream video and connect to printer from all networks and not just local network.It will be super amazing if it can let us to connect with just ip address far away from printer. TNX again. **Developer response:** Thank you for your feedback! The next update will have live video. For connection outside your network you can use a VPN that connect you mobile to your router. I will try to create a tutorial on the website. ### 5/5 — Exactly what’s needed *2025-04-05* This app does everything you need to monitor your printer. Can’t wait for the future updates and enhancements. **Developer response:** Thank you very much for your feedback! The next update will have live video and other new feature that some of you will like. ### 5/5 — Einfach Perfekt! *2025-03-07* Ich liebe diese App. Sehr übersichtliche und richtig smarte Lösung den Zustand des Druckers abzurufen. Wenn jetzt noch die Liveansicht der Kamera implementiert wird bin ich wunschlos glücklich. Aktuell funktionieren nur Kamera Schnappschüsse. Vielen Dank an jeden der an der Entwicklung der App beteiligt war. **Developer response:** Vielen Dank für dein tolles Feedback! Es freut mich sehr, dass dir die App gefällt. Ich arbeite bereits an zukünftigen Updates, und die Integration der Liveansicht der Kamera steht definitiv auf meiner Liste. Bleib dran! ### 5/5 — Excellent App! *2025-02-14* Thanks very much for making this - it’s perfect ### 5/5 — It works! *2025-02-12, version 1.0.4* This latest release hooked up to my Elegoo Saturn 4U. It can tell me when the print is finished! Since my printer is in a shop separate from my house this is handy. Nice to also see my FEP usage too. --- *Data collected daily from the US App Store and indexed by [AppsHunter](https://appshunter.io/). User reviews are verbatim App Store reviews. Ratings, prices and chart positions refresh continuously; this snapshot is from 2026-09-06.*