# Sculpto > Control and print 3D models using a compatible Sculpto 3D printer. (iPhone/iPad app by Sculpto ApS.) - Source: https://appshunter.io/ios/app/sculpto/id1128746870 (this page in markdown: same URL + `.md`) - Developer: [Sculpto ApS](https://appshunter.io/developer/1128739119) - Category: Utilities, Entertainment - Price: Free - Rating: 1.67/5 from 42 App Store ratings · 29 written reviews indexed - Age rating: 4+ - Requires: iOS 11.0 · 18 MB - Languages: English - Released: 2016-09-04 - Data updated: 2026-06-10 - Monetization: free - User reviews in markdown: https://appshunter.io/ios/app/sculpto/id1128746870/reviews.md ## What is Sculpto? The Sculpto App allows you to 3D print your own and others' ideas on your Sculpto 3D printer. After you have connected your Sculpto Printer to your Wi-Fi, you get access to a large selection of 3D models that you can print. All you need to do is to choose the quality you want to print and then press “Print". Requirement: You must have access to a Sculpto or Sculpto+ 3D Printer. For more information visit www.sculpto.eu ## Key features - 3D model printing - Access to 3D model library - Print quality selection - Wi-Fi printer connection - One-tap printing ## Recent user reviews (10 of 29) All indexed reviews: https://appshunter.io/ios/app/sculpto/id1128746870/reviews.md ### 1/5 — Every STL file says “Process Failed” HELP *2023-07-20* Every file I have will not load the app says “Processing failed” check you have a valid ATL file. I downloaded all files from Thingaverse which this App required. Reddit users have had the same issue with prints they have already used before. ### 1/5 — Software *2023-02-22* 100% of their problems could be fixed with an update and adding a few features that they refuse to do for some reason ### 1/5 — App problems after iOS 15.6 installed *2022-08-08, version 3.4.4* The upload file, edit preview is broken after the update was installed. Opened a ticket with support.. no answer back. ### 1/5 — Ugh, really? App doesn’t work. *2022-05-02, version 3.4.4* Successfully logged into Thingiverse after a lot of failed attempts but the app itself WILL NOT WORK. I’ll click on an item and it just gives me the same blank screen every time. I haven’t even received the Sculpto printer yet and now I’m super worried it was a waste of money because of the app being such a pain already. Hoping it prints okay. Not feeling super hopeful. ### 2/5 — This thing is a pain to connect to the internet *2021-07-01, version 3.4.1* Almost every time I try to print something I need to stop it or turn it off, and when you turn it off you need to reconnect it to the internet and 99% of the time it takes at least half an hour or more and half the time I give up ### 4/5 — Could Use some work, but manageable *2020-12-18, version 3.2.2* It’s not THAT bad. Just requires a lot of patience. Hardware seems very out of the box and go, but software isn’t quite that way yet. However after learning my way around the bugs and whatnot, it’s easy to use. ### 1/5 — Horrible App *2020-11-17, version 3.2.2* Using the app is horrible. Took forever to get the app connected to the printer, and when I couldn’t get the filament to feed into the printer, the FAQ says to reset by turning the printer off. But then, I was locked out of the app. Now, I can’t even log back into the app, or create a new account. I’m over this app and the printer. I wish I had read the reviews here first. ### 4/5 — Works but needs detailed tutorial *2020-11-02, version 3.2.2* The only challenging part of this plug and play printer is the WiFi setup. It must be over a 2.4gHz connection and more importantly and NOT documented is it doesn’t use the highest security connection. Uses WPA or lower/none iirc? I found this detail on a YouTube comment on one of their non setup vids! If you don’t have access to edit your internet connection if needed this is a cheap accent piece. In regards to printing I would upload atlas files directly to the printer. It can use thingiverse to get models but sadly that giant database is poorly optimized that its a running joke. Sadly Sculpto doesn’t display all the info on said thingiverse pages such as remixes. Use a thingiverse viewer like 3dgeeks to get files to print or avoid thingi altogether. You can print from the app or from your printers WiFi page. Get the link from sculpto faq page footer. To print gcode files you must use that printer website. Using gcode also..voids your warranty. Remember this is geared to novices who might not know how to slice. Happy printing and check out the 3D printing reddit or discord for help and tips ### 1/5 — Unable to Login *2020-09-10, version 3.2.2* I created a username at Thingiverse, but it doesn’t work. I can’t login to the site at all. ### 1/5 — Bad *2020-08-08, version 3.2.2* Terrrible ## Frequently asked questions about Sculpto ### What does the Sculpto App do? The Sculpto App allows you to 3D print your own and others' ideas on your Sculpto 3D printer. After connecting your printer to Wi-Fi, you can access a large selection of 3D models to print. ### What are the key features of the Sculpto App? Key features include the ability to 3D print models, access to a library of 3D designs, selection of print quality, and initiating prints with a single tap after connecting your printer via Wi-Fi. ### Is the Sculpto App free to use? Yes, the Sculpto App is free to download and use. There are no in-app purchases or advertisements mentioned. ### What are the requirements to use the Sculpto App? To use the Sculpto App, you must have access to a Sculpto or Sculpto+ 3D Printer. The printer also needs to be connected to your Wi-Fi network. ### Who is the target audience for this app? This app is designed for individuals who own a Sculpto or Sculpto+ 3D printer. It caters to hobbyists and makers who want to easily print designs and models. ## Version history (last 5 releases) ### 3.4.6 — 2023-04-24 - Account deletion - Added rotation axis to STL editor - Bug fixes ### 3.4.4 — 2022-01-26 Bug fixes ### 3.4.3 — 2022-01-19 Bugfix for older iOS versions ### 3.4.2 — 2021-08-25 - Change filament bug fix ### 3.4.1 — 2021-06-02 - Sculpto Boxes - Sign in with Apple ## Apps similar to Sculpto | App | Rating | Price | Category | | --- | --- | --- | --- | | [Anycubic: 3D Print & Models](https://appshunter.io/ios/app/anycubic-3d-print-and-models/id1662443263) | 2.8 (320) | Free | Utilities | | [Beagleprint](https://appshunter.io/ios/app/beagleprint/id1618227328) | 3.0 (23) | Free | Utilities | | [Thangs](https://appshunter.io/ios/app/thangs/id1636718933) | 3.1 (105) | Free | Utilities | | [My Mask (Movement)](https://appshunter.io/ios/app/my-mask-movement/id1511026208) | 4.4 (17) | Free | Utilities | | [Kraken for OctoPrint](https://appshunter.io/ios/app/kraken-for-octoprint/id1472939486) | 3.7 (38) | Free | Utilities | | [JMStudio](https://appshunter.io/ios/app/jmstudio/id6448431905) | 1.8 (25) | Free | Utilities | --- *Data collected daily from the US App Store and indexed by [AppsHunter](https://appshunter.io/). User reviews are verbatim App Store reviews. Ratings, prices and chart positions refresh continuously; this snapshot is from 2026-06-10.*