# Smith Designer > Smith Designer (iPhone/iPad app by Morten Vinding.) - Source: https://appshunter.io/ios/app/smith-designer/id6782214048 (this page in markdown: same URL + `.md`) - Developer: [Morten Vinding](https://appshunter.io/developer/6782186078) - Category: Utilities, Productivity - Price: $3.99 - Age rating: 4+ - Requires: iOS 15.0 · 39 MB - Languages: American English - Released: 2026-06-24 - Data updated: 2026-09-22 - User reviews in markdown: https://appshunter.io/ios/app/smith-designer/id6782214048/reviews.md ## What is Smith Designer? Smith Designer is a powerful and interactive Smith Chart tool for RF and Microwave professionals, students, and hobbyists. Design, analyze, and optimize impedance matching networks directly on your mobile device. A Smith Designer Lite version is available. Whether you are designing an antenna match, an amplifier interstage, or a filter, Smith Designer provides an intuitive interface to visualize impedance transformations in real-time. Key Features: • Interactive Smith Chart: Visualize impedance trajectories as you add components. Toggle between Impedance (Z) and Admittance (Y) grids. • Schematic Editor: Build matching networks using a drag-and-drop interface. Supports Series/Shunt Inductors, Capacitors, Resistors, series and parallel RLC, Transmission Lines (Series and shunt, Open/Short Stubs), Transformers, fixed jX and jB, and S2P blocks. • Real-Time Tuning: Adjust component values using sliders or by dragging points directly on the Smith Chart to see immediate effects. • Auto Match: Automatically synthesize L-network matching circuits to match a source to a load. • Simultaneous Conjugate Matching for unconditionally stable devices, and provisions to help stabilize conditionally stable networks. • Optimization: Built-in gradient descent optimizer to fine-tune component values for the best match. • Frequency Sweeps: Analyze your design over bandwidth. Plot S-Parameters (S11, S21, S12, S22), Gain (Ga, Gp, Gt), Noise Figure, Return Loss, and Group Delay. • Monte Carlo Analysis: Simulate manufacturing tolerances. Define component variations (Uniform, Gaussian, Triangular) and visualize the spread on the Smith Chart to ensure design robustness. • S2P/Touchstone Support including noise data: Import .s2p files for S-parameter blocks and .s1p files for frequency-dependent source/load impedances. • Vendor Libraries: Easily import and use component libraries (supports Murata LPB format, see https://www.murata.com/tool/data/librarydata). • Comprehensive Overlays: Visualize VSWR circles, Constant Q arcs, Stability circles, and Noise circles (requires noise parameters). • Load Pull Contours: Import multi-frequency Load Pull and MDIF files. Frequency interpolation (nearest, linear, cubic spline). Filled contours with 5 color maps. Reference/contour plane transforms through the matching network. • Data Explorer to assess SnP data files, load-pull data files, antenna patterns and more. Advanced Tools: • Trace Designer: Full 2D Boundary Element Method solver for PCB transmission lines — Microstrip, GCPWG, Stripline, Differential, Coated, and Embedded variants. Multilayer substrates, trapezoidal traces, conductor roughness models, impedance synthesis, and experimental E-field visualization. • Analytical Line Models: Closed-form Z₀, loss, and synthesis for Coaxial, Parallel Lines, Twisted Pair, Microstrip, Stripline, Grounded CPW, Rectangular Waveguide, and Circular Waveguide. • Transmission Line Models: Constant Phase, Electrical Length, and Physical models with loss and velocity factor. • Resonator & Attenuator Designers: Built-in calculators for common circuit blocks. Export & Share: • Export professional PDF reports with schematics, charts, and plots. • Export designs as SPICE netlists for further simulation. • Save high-resolution PNG/SVG images. • Share project files to collaborate with others. Perfect for RF engineering coursework, ham radio antenna tuning, and professional circuit design. Unlock the power of the Smith Chart in your pocket! Contact: For support or feature requests, please contact us. (c) A3DComm ## Version history (last 5 releases) ### 1.5.3352 — 2026-09-21 • Hover or long-press a tolerance region for its own read-out: samples, centre, the range of |Γ|, R, X, VSWR and return loss, the spread and the region's size • Select the source or load anywhere and tune it from a card, with a toggle between its real and imaginary part • Chart exports now carry the grid readings, the trajectory arrows and the panels, and export as editable diagrams too • Delete one or all markers from the Data Explorer marker menu ### 1.5.3321 — 2026-09-14 • 3D Smith tube: constant-Q contours now stay inside the chart, the operating point is marked, and the grid intensity is adjustable • Trace Designer: a PDF export with missing or out-of-date results offers to run the analysis first, and its drawings fill their boxes • Charts: one marker toolbar with a clear button, readouts with the decimals the zoom needs, and markers that drag from anywhere on their line ### 1.5.3232 — 2026-08-28 • Grid styles: Adaptive graduates the grid like a printed chart and refines it as you zoom; Classic reproduces the printed chart's full graduation; Custom keeps your value lists • Radially scaled parameters under the chart and circumferential scales around the rim, both optional and both in PNG/SVG export • Element trajectories sampled adaptively — smooth through resonances and long lines • Help Center tables and equations fit the panel ### 1.5.3208 — 2026-08-24 • Smith Chart: the sweep plot now toggles between magnitude and phase — two views of one sweep, both refetched over the same window, so a zoom taken in the phase view stays there • Trace Designer: new stack-up mode — a whole PCB of copper and dielectric layers, with structures placed on a chosen layer against a chosen reference • Touchstone files of up to eight ports load correctly • Fixes to marker menus, marker readouts and cross-section labels ### 1.5.3119 — 2026-08-14 • The Resonator Designer now draws the response its element values imply — magnitude and phase, in impedance or admittance, with the resonance, the −3 dB edges and Q marked • Toolbars re-laid out: the title takes only the width it needs, so the button ribbon gets the rest of the bar • Save dialogs no longer produce doubled or missing file extensions ## More apps by Morten Vinding - [AetherRF](https://appshunter.io/ios/app/aetherrf/id6782186076) - [Smith Designer Lite](https://appshunter.io/ios/app/smith-designer-lite/id6782214316) - [AetherRF Lite](https://appshunter.io/ios/app/aetherrf-lite/id6782214375) All apps by Morten Vinding: https://appshunter.io/developer/6782186078 --- *Data collected daily from the US App Store and indexed by [AppsHunter](https://appshunter.io/). User reviews are verbatim App Store reviews. Ratings, prices and chart positions refresh continuously; this snapshot is from 2026-09-22.*