# SvitGrid Monitor — Solar & battery energy monitor > Solar & battery energy monitor (iPhone/iPad app by Ivan Ursul.) - Source: https://appshunter.io/ios/app/svitgrid-monitor/id6759446926 (this page in markdown: same URL + `.md`) - Developer: [Ivan Ursul](https://appshunter.io/developer/1583025193) - Category: Utilities, Lifestyle - Price: Free with in-app purchases - Age rating: 4+ - Requires: iOS 15.0 · 92 MB - Languages: American English - Released: 2026-05-07 - Data updated: 2026-08-27 - User reviews in markdown: https://appshunter.io/ios/app/svitgrid-monitor/id6759446926/reviews.md ## What is SvitGrid Monitor? Svitgrid turns your solar inverter into a smart energy platform. Connect directly to your Deye, Sunsynk, Sol-Ark, or Victron inverter and see every watt in real time — where it comes from, where it goes, and how much it's saving you. LIVE ENERGY DASHBOARD See solar production, home consumption, battery state, and grid flow at a glance. Clean visualizations update every second, so you always know what your system is doing right now. MULTI-BRAND INVERTER SUPPORT — Deye SG04LP3, SG03LP1, SG01HP3 (3-phase hybrid) — Deye SG01LP1, SG02LP1, Sun G3 (1-phase hybrid) — Sunsynk 1-phase and 3-phase hybrid — Sol-Ark 5K / 12K / 15K — Victron MultiPlus-II GX — Deye microinverters and string inverters INVERTER CONTROL Not just monitoring. Adjust battery charge/discharge limits, sell-to-grid settings, work modes, and time-of-use schedules right from your phone. BATTERY & GRID INSIGHTS Track state of charge, battery power flow, daily import and export, and self-consumption ratio. Know exactly when you're charging from the sun vs. pulling from the grid. HISTORICAL CHARTS Daily, weekly, and monthly views of production and consumption. Compare days, spot trends, and see how seasons and weather affect your system. MULTI-USER HOUSEHOLDS Invite family members to the same home. Role-based permissions keep sensitive settings safe while everyone stays in the loop. EDGE GATEWAY (OPTIONAL) Pair with the Svitgrid Edge Connector for continuous 24/7 cloud monitoring — your data keeps flowing even when your phone isn't home. Get alerts for low battery, grid outages, or unusual consumption. SMART DEVICE CONTROL Control Zigbee smart sockets directly from the app. Combined with the Edge Connector, you can schedule high-consumption devices around solar production automatically. FLEXIBLE CONNECTIVITY Connect directly to your inverter over local WiFi, or use the Edge gateway for cloud-based monitoring from anywhere. Your choice. PRIVACY FIRST Your energy data stays yours. No ads, no data selling. Optional cloud sync is fully encrypted. WHO IT'S FOR — Homeowners with solar + battery systems who want to understand and optimize their setup — Installers managing multiple customer sites — Energy enthusiasts who love seeing the numbers Get more out of your solar investment. Download Svitgrid and see your energy like never before. Terms of Use (EULA): https://svitgrid.app/terms Privacy Policy: https://svitgrid.app/privacy ## Pricing and in-app purchases Base price: Free. **Subscriptions** | Subscription | Price | Period | | --- | --- | --- | | Basic | $2.00 | per month | | Plus | $7.99 | per month | | Pro | $14.99 | per month | | Basic | $20.00 | per year | | Plus | $79.99 | per year | | Pro | $149.99 | per year | ## Version history (last 5 releases) ### 1.0.237 — 2026-08-24 Your battery, read by the phone • If your home is harvested by the phone rather than an Edge connector, the app can now read your battery packs directly over Bluetooth — cell voltages, temperatures, the spread between cells, and which pack is the outlier. Battery is now three screens: the bank, a pack, and a pack's cells. • You choose which protocol reads a pack (JK, JBD/Xiaoxiang, ANT and others), rather than the app guessing. • The cell-balance figure now always names the pack and the monitor it came from, and no longer explains away a spread on a resting pack. Adding an inverter • The app can now find every EyBond collector on your network and let you pick which ones to add, instead of asking you to type a serial you may not have. • Anenji (SmartESS) inverters can be selected and harvested. • An inverter added through a collector is now correctly bound to that collector. Calendar and schedules • Fixed: schedules that switch a smart device on or off — "use solar at home" and "lower consumption" — were never signed, so once your household had a signing key the inverter refused them and the event log filled with "Команда не була підписана" once a minute. They are signed now. • The app also renews schedule signatures before they lapse. A signature that quietly expired stopped the schedule running with no error anywhere, which is why a schedule could simply stop happening. • Fixed: the «РДН» pill no longer paints over the «Експорт» label in the chart legend. • Fixed: the app no longer claims your inverter supports nothing when it does. • Time-of-use now shows the master state, not only the grid-charge part of it. Smaller fixes • The generator-port icon holds still when the port reads OFF, instead of animating as though power were flowing. • Long titles on the home screen's detail cards no longer break mid-word. • The inverter settings list no longer jitters near the bottom. • An outage notification is no longer re-posted as a fresh banner on iOS every time it updates. ### 1.0.234 — 2026-08-19 Multi-inverter homes • The energy flow chart's pages are now labelled tabs (Home, Inv 1, Inv 2…) instead of plain dots, and every tile in the whole-home view carries the same number — so you can finally tell your inverters apart. Tap a tab or a tile to jump straight to that inverter. • A home with exactly two inverters no longer shows "Master" under both of them. Home Assistant • Fixed: the app kept reopening on "Add inverter" after a successful pairing, asking for a logger serial a Home Assistant home does not even need. The inverter was never lost — a leftover setup wizard was. If you are stuck in this loop right now, close the wizard with the X in its corner and confirm discarding it, rather than deleting the household. • In local mode, the dashboard, charts, daily statistics and energy summary now fall back to the cloud when you are away from home and your household is uploading, instead of showing errors. • Switching to local mode no longer silently switches off cloud upload, and the cloud-sync switch can no longer fail every single time. Calendar and inverter control • Editing an event now opens on your event's own mode — ticked, in its own colour, first in the list — instead of the create-a-new-event mode picker. • Fixed: changing a charge time slot left "Applying…" spinning and then claimed the change never reached the inverter, on a change the inverter had already applied within seconds. Work mode, sell-to-grid and generator controls were affected the same way. • The day-ahead price-range condition is available again on the "Активний споживач (РДН)" tariff, and that tariff can now use drain-to-grid in battery maintenance. Settings and tariffs • Fixed: on the "Для підприємців (фікс. ціна)" tariff there was no way to save the import price you typed. Worth checking yours — choosing that tariff saved a price of 0 straight away, so it may still be sitting at 0. The sell-price cap on "Активний споживач" had the identical problem and is fixed alongside it. • The grid limit setting now explains itself: it caps household use and battery charging together, and is not the same as the grid charging current limit. • A multi-pack battery bank now shows its total capacity, and in every language. Alerts • Notification preferences are now stored as the alerts you have muted rather than the ones you want, so newly added alert types reach you by default. Five types that were never offered a toggle at all — your inverter or its WiFi logger unreachable, an inverter configuration problem, and a solar string producing almost nothing while the others are fine — will start arriving; four of them bypass quiet hours. • Alerts that need a decision from you now open onto a screen leading with what happened and the numbers behind it, and carry a one-tap "stop showing this". • When your battery stops charging above the reserve you set because a time-of-use slot is capped lower, the alert can now raise that slot for you directly. Also in this release • You can add a grid-tie inverter that feeds your hybrid's generator port, so its panels finally count towards the generation forecast. • An inverter with no battery — a grid-tie or a microinverter — is no longer drawn with an empty battery card sitting at zero. • Charts no longer mark the last few minutes as a break in data collection while data is arriving normally. • On an iPad held sideways, pull-to-refresh now works over the left-hand half of the home screen too. • Fixed an error storm behind the lingering unread badge on iOS 27. • Fixed: if your inverter runs a smart load and you had not switched the generator port on for display, part of your house consumption was subtracted and then shown nowhere — the app read lower than the inverter's own screen and than the home-screen widget. The three now agree. ### 1.0.224 — 2026-08-08 Multi-inverter homes • The energy flow chart's pages are now labelled tabs (Home, Inv 1, Inv 2…) instead of plain dots, and every tile in the whole-home view carries the same number — so you can finally tell your inverters apart. Tap a tab or a tile to jump straight to that inverter. • A home with exactly two inverters no longer shows "Master" under both of them. Home Assistant • Fixed: the app kept reopening on "Add inverter" after a successful pairing, asking for a logger serial a Home Assistant home does not even need. The inverter was never lost — a leftover setup wizard was. If you are stuck in this loop right now, close the wizard with the X in its corner and confirm discarding it, rather than deleting the household. • In local mode, the dashboard, charts, daily statistics and energy summary now fall back to the cloud when you are away from home and your household is uploading, instead of showing errors. • Switching to local mode no longer silently switches off cloud upload, and the cloud-sync switch can no longer fail every single time. Calendar and inverter control • Editing an event now opens on your event's own mode — ticked, in its own colour, first in the list — instead of the create-a-new-event mode picker. • Fixed: changing a charge time slot left "Applying…" spinning and then claimed the change never reached the inverter, on a change the inverter had already applied within seconds. Work mode, sell-to-grid and generator controls were affected the same way. • The day-ahead price-range condition is available again on the "Активний споживач (РДН)" tariff, and that tariff can now use drain-to-grid in battery maintenance. Settings and tariffs • Fixed: on the "Для підприємців (фікс. ціна)" tariff there was no way to save the import price you typed. Worth checking yours — choosing that tariff saved a price of 0 straight away, so it may still be sitting at 0. The sell-price cap on "Активний споживач" had the identical problem and is fixed alongside it. • The grid limit setting now explains itself: it caps household use and battery charging together, and is not the same as the grid charging current limit. • A multi-pack battery bank now shows its total capacity, and in every language. Alerts • Notification preferences are now stored as the alerts you have muted rather than the ones you want, so newly added alert types reach you by default. Five types that were never offered a toggle at all — your inverter or its WiFi logger unreachable, an inverter configuration problem, and a solar string producing almost nothing while the others are fine — will start arriving; four of them bypass quiet hours. • Alerts that need a decision from you now open onto a screen leading with what happened and the numbers behind it, and carry a one-tap "stop showing this". • When your battery stops charging above the reserve you set because a time-of-use slot is capped lower, the alert can now raise that slot for you directly. Also in this release • You can add a grid-tie inverter that feeds your hybrid's generator port, so its panels finally count towards the generation forecast. • An inverter with no battery — a grid-tie or a microinverter — is no longer drawn with an empty battery card sitting at zero. • Charts no longer mark the last few minutes as a break in data collection while data is arriving normally. • On an iPad held sideways, pull-to-refresh now works over the left-hand half of the home screen too. • Fixed an error storm behind the lingering unread badge on iOS 27. ### 1.0.222 — 2026-08-06 Fixes the 1.0.221 sign-in problem. If updating to 1.0.221 logged you out and your system was then missing, this build restores it — and nothing of yours was lost. That build was sent to the store carrying the settings for our internal test environment, so the app looked you up in the wrong place. Your household, inverters, connector and full reading history were never touched. After updating, sign in the same way you originally signed up. If you created your account with an email and password, use that — signing in with Google or Apple instead creates a separate account. ### 1.0.221 — 2026-08-04 Planning • Maximum selling is now a single planning model, offered only if your tariff actually lets you sell to the grid. • Each planned cycle explains itself: what it earns, the price it was valued at, where the battery refills from and what that costs. • Battery-hold windows now show the expected charge level at the start and end, and why the battery is being held. • Green-tariff earnings are now shown net of the 18% ПДФО and 5% military levy, so the figure matches what you are actually paid. Setup and calendar • Huawei SmartLogger setup now finds inverters at Modbus addresses 1 to 32, not just 1 to 10, and reports save failures instead of appearing to do nothing. • The calendar scrolls continuously through midnight, and a single event can now span it. • Edge-connector setup works on WiFi networks with no password. Fixes • The app no longer opens into the Add inverter wizard for a household that no longer exists. • Firmware-update banners clear correctly instead of showing an install that already finished. • Ukrainian wording corrections across the plan and trial screens. ## Related topics [deye home](https://appshunter.io/ios/topics/deye-home) --- *Data collected daily from the US App Store and indexed by [AppsHunter](https://appshunter.io/). User reviews are verbatim App Store reviews. Ratings, prices and chart positions refresh continuously; this snapshot is from 2026-08-27.*