# VeloGPS — Handheld GPS for your iPhone > iPhone GPS device with track recording, waypoints, and GPX export. (iPhone/iPad app by AIDAN STANLEY MARCUSS.) - Source: https://appshunter.io/ios/app/velogps/id6759881017 (this page in markdown: same URL + `.md`) - Developer: [AIDAN STANLEY MARCUSS](https://appshunter.io/developer/1881440804) - Category: Navigation, Utilities - Price: Free - Rating: 5.00/5 from 2 App Store ratings · 2 written reviews indexed - Age rating: 4+ - Requires: iOS 18.0 · 4 MB - Languages: American English - Released: 2026-03-14 - Data updated: 2026-07-29 - Monetization: free - User reviews in markdown: https://appshunter.io/ios/app/velogps/id6759881017/reviews.md ## What is VeloGPS? VeloGPS turns your iPhone into a full handheld GPS. Precise coordinates, barometric altitude, compass, waypoints, track recording, and GPX export — everything a dedicated GPS unit does, on the device you already carry. Built for hiking, cycling, kayaking, sailing, skiing, backcountry travel, geocaching, and anything else you'd reach for a handheld for. Live GPS Dashboard A frost-glass overlay on the map shows coordinates, speed, and direction by default — tap the chevron to expand for altitude and pressure. The Info tab gives you the full readout: coordinates, speed, altitude, course, compass heading, and barometric pressure on one screen. Coordinates display in DD, DMS, or UTM. Track Recording & GPX Export Record your route with a single tap. Tracks auto-pause when you stop and resume the moment you move again, so distance and elevation gain reflect what you actually did. Each track is auto-classified as cycling, hiking, running, walking, driving, or flying based on motion sensors during recording. Saved tracks appear as colored polylines on the map and export as standard GPX files — complete with metadata block and activity type — for any mapping tool. Rename, recolor, re-tag activity, toggle visibility, swipe to delete with undo. Smooth, Accurate Altitude A fused altimeter combines the iPhone's barometer with GPS for steady, responsive elevation — with an outlier filter that rejects physically impossible pressure spikes from tunnels, doors, and cabin-pressure changes. EMA smoothing keeps recorded altitude clean. On iPads and devices without a barometer, GPS-only smoothing keeps the reading stable. Waypoints Save your current location with one tap. Tap a pin on the map to jump to details. Distance to each waypoint updates as you move. Mark trailheads, campsites, caches, hazards, summits — anywhere you want to find again. Interactive Map Standard, Hybrid, and Satellite views. A live accuracy circle shows your GPS precision. Tracking mode centers the map on you; pan or pinch to release it instantly. Long recorded tracks render smoothly at every zoom level. Haptic feedback confirms every interaction. Flight Mode A dedicated mode for aviation: GPS altitude (cabin pressure would corrupt the barometric altimeter), pre-flight checklist, and tuned filters. Live Activity & Lock Screen Keep speed, coordinates, altitude, distance, and your activity glyph on your Lock Screen and Dynamic Island — even when the app is in the background. Charts & Session Stats Real-time charts for speed, altitude, and pressure with windows from 1 minute to 1 hour. Session stats show distance, elevation gain/loss, max speed, average moving speed, and current grade — now on a true rolling window so the last hour is always the last hour. Power Saver Extend battery on long outings. Lowers GPS update frequency, pauses the magnetometer, and auto-suspends GPS when you're stationary. GPS Signal Quality A color-coded toolbar indicator shows your fix quality at a glance. Tap for detailed horizontal, vertical, speed, and course accuracy — plus a Processing section showing the current altitude source (fused, GPS-only, or flight mode) and live motion activity. Flexible Units Coordinates in DD, DMS, or UTM. Speed in mph, km/h, or knots. Distance in imperial or metric. Pressure in kPa, hPa/mbar, inHg, or mmHg. iPhone & iPad Tabbed navigation on iPhone, sidebar on iPad. Adapts to split-screen and slide-over. Portrait and landscape. Private by Design No accounts, no analytics, no servers. All data stays on your device. ## Key features - Precise GPS coordinates and barometric altitude - Compass and waypoint saving - Track recording with auto-pause - GPX export for mapping tools - Interactive maps with multiple views - Live Activity and Lock Screen integration - Power saver mode for extended use ## Recent user reviews (2 of 2) All indexed reviews: https://appshunter.io/ios/app/velogps/id6759881017/reviews.md ### 5/5 — Awesome for recording tracks of any type! *2026-04-11* Great app for recording your tracks! Free to use and pleasant user interface makes recording very fun! **Developer response:** Glad it is working well for you! ### 5/5 — Perfect fit *2026-03-27* Amazing app for all things navigation. No ads, no fuzz, just beautiful data. **Developer response:** Thank you! So glad you are enjoying it. ## Frequently asked questions about VeloGPS ### What devices does VeloGPS support? VeloGPS is available for iPhone and iPad devices. It leverages the device's built-in sensors for its navigation features. ### How accurate is VeloGPS's altitude reading? VeloGPS uses a fused altimeter that combines the iPhone's barometer with GPS data for steady and responsive elevation readings. It also includes an outlier filter to reject physically impossible pressure spikes. ### Can I use VeloGPS offline? While the app utilizes GPS for positioning, which generally works offline, the interactive map features and live data updates may require an internet connection for optimal performance. Track recording and GPX export function without a constant connection. ### How does VeloGPS handle battery consumption on long trips? VeloGPS includes a Power Saver mode that lowers GPS update frequency, pauses the magnetometer, and auto-suspends GPS when you are stationary to extend battery life on long outings. ### What kind of data can I export from VeloGPS? You can export your recorded tracks as standard GPX files. These files include metadata such as activity type, making them compatible with most mapping tools. ### Does VeloGPS have ads? No, VeloGPS is ad-free. This allows for an uninterrupted navigation experience, especially during outdoor activities. ### How often is VeloGPS updated? The latest version, 1.4.0, was released on June 6, 2026, indicating recent development and ongoing support for the application. ### What are the main benefits of using VeloGPS over a dedicated GPS unit? VeloGPS offers the convenience of using a device you already carry, providing precise coordinates, barometric altitude, compass, waypoints, track recording, and GPX export. It aims to replicate the functionality of a dedicated unit. ## Version history (last 5 releases) ### 1.4.1 — 2026-07-25 Track recording, rebuilt for accuracy This release overhauls the recording pipeline end to end. A new motion-aware filter suppresses GPS jitter as you record — no more zig-zags at stoplights or wander while you're stopped — and when you save, the entire track is re-smoothed using the full recording for the cleanest possible line. Stopped recordings no longer accumulate phantom distance, max speed ignores single-fix glitches, and average moving speed is properly time-weighted. Honest about signal loss When GPS drops out — tunnels, airplane cabins, urban canyons — VeloGPS now says so instead of guessing. Charts show a gap rather than a fabricated flat line, the Live Activity switches to a clear SIGNAL LOST state, the map draws a dashed bridge across the outage, and GPX exports split the track at real outages so other apps don't invent impossible speeds. Better in the air Flight mode adds an altitude filter that rejects physically impossible single-sample spikes, and it no longer accepts coarse ground-level fixes during a GNSS outage at cruise — your flight tracks stay at altitude where they belong. Better on rails and in traffic Multipath "teleports" — the sideways jumps you see on trains and among tall buildings — are now detected and rejected before they reach your track. Steadier on long recordings A new memory guard suspends the map view before iOS can terminate the app mid-recording, so all-day tracks survive aggressive memory pressure. Background recording is also more robust, no longer tied to UI updates. Sharper GPX exports Trackpoint timestamps now carry fractional seconds, so exported tracks show correct point-to-point speeds in other mapping tools. ### 1.4.0 — 2026-06-06 Redesigned map dashboard The map tab has a new frost-glass overlay at the bottom showing the readings you care about — coordinates, speed, and direction by default. Tap the chevron to expand to a five-cell view that adds altitude and pressure. The map stays fully interactive behind the overlay: pan, pinch, and tap annotations as usual. Adapts to portrait, landscape, dark mode, and every map style. Direction at a glance Course (where you're heading) and compass heading (where the phone is pointing) are now combined into a single Direction cell, with an arrow that flips between travel and compass as appropriate. Smarter follow mode The map releases follow mode the instant you pan or pinch, so it never fights you for the camera. Tap the tracking-mode button to re-center. Session (Last Hour) is now a true rolling window Session stats on the Info tab now reflect the actual last 60 minutes of activity, dropping older samples as new ones come in. Steadier on long days The map view unmounts when you switch tabs and the camera + tracking mode persist across launches, so coming back to the map is instant. Background recording is more reliable, and a memory sampler keeps long sessions running smoothly in the background. Plus fixes for a Live Activity tap crash, smoother dashboard expansion animation, and iPhone landscape routing. ### 1.3.0 — 2026-05-18 Tracks auto-classify! Every recording is now auto-classified as cycling, hiking, running, walking, driving, or flying based on motion sensors while you record. The activity glyph appears in the track list, and on the save toast. Mixed activities are tagged "Mixed"; you can re-tag any track from its detail screen. Tracks recorded before 1.3.0 are tagged once, automatically, using a speed heuristic. Richer GPX exports Exported GPX files now include a metadata block (track name, recorded time, total distance, activity type) so the files round-trip cleanly into Strava, Garmin Connect, Caltopo, and other tools that read GPX metadata. Steady on long rides Map polylines for long recorded tracks are now decimated based on zoom level, so a multi-hour ride renders smoothly at every scale without losing detail when you zoom in. In-flight recording samples are bounded by reservoir sampling, so memory stays flat no matter how long the recording runs. Smoother recorded altitude Recorded altitude is now EMA-smoothed in the default fused mode, matching the on-screen reading. Elevation gain and the altitude chart on saved tracks line up with what you saw while recording. Plus minor reliability fixes across the Live Activity widget, activity-aware toast wording, and track save handling. ### 1.2.1 — 2026-04-19 Smoother, steadier altitude A new barometric outlier filter rejects physically impossible pressure spikes (think: driving into a tunnel or a sudden cabin-pressure change), so elevation gain and the altitude chart stay clean on real-world rides and hikes. Auto-pause when you stop Track recording now pauses automatically when CoreMotion detects you're stationary — no more drift-padded distance or phantom elevation gain while you're at a viewpoint or stopped at a light. Resumes the moment you move again. More accurate elevation gain Fixed a unit bug in the Kalman filter and improved how tracks split when you switch between moving and stationary. Recorded tracks now match what your legs actually did. Reliable background recording Long recordings no longer drop points when the app is backgrounded. Fused altitude, distance, and elevation keep accumulating the whole ride. GPS Signal Quality: new Processing section The quality sheet now shows your current altitude source (fused baro+GPS, GPS-only, or flight mode) and live motion activity, so you can see exactly what the app is doing under the hood. Plus smaller fixes across flight mode reporting, map zoom stability, and accessibility. ### 1.2.0 — 2026-03-28 Power Saver Mode New Power Saver option reduces battery consumption on long rides by lowering GPS update frequency and pausing sensors when stationary. GPX Export Share your recorded tracks as standard GPX files — tap the share button on any track detail screen. Smoother Charts Charts now use EMA smoothing for cleaner speed, altitude, and pressure lines. A new GPS Activity chart shows your location update frequency in real time. iPad Improvements Map state is no longer lost when switching sidebar tabs. Layout adapts correctly in split-screen and slide-over multitasking. Performance & Reliability Faster track saves, more stable map zoom, improved Live Activity updates, and numerous under-the-hood optimizations. --- *Data collected daily from the US App Store and indexed by [AppsHunter](https://appshunter.io/). User reviews are verbatim App Store reviews. Ratings, prices and chart positions refresh continuously; this snapshot is from 2026-07-29.*