Enigma Semi vs Evoke

Enigma Semi-Full EASY mode exclusive operation application. This application is for Enigma Semi-Full only. It can not be used for the conventional another Enigma series. This application is only for EASY mode which can adjust the ignition time. There is a dedicated application in PRO mode that can set the ignition time. This application can be downloaded for free. When it is free, you can connect with all Enigma Semi-Full, but only the tachometer screen is displayed. (Only tachometer and TPS are displayed). In order to set various functions of Enigma Semi-Full, you need to purchase the bike model corresponding to Enigma Semi-Full you have from the model selection screen. When purchasing and selecting bike model , the following functions can be used. - Preset a data combined. Preset data can be easily written to Enigma Semi-Full. - + 20 / - 20 degree spark advance / delay angle can be adjusted for each engine rotation / throttle position. It is also possible to adjust the dwell time. - The fuel injection amount can be set for each engine rotation / throttle position. - Fuel correction at idling can be performed. - Startability and idling stabilization correction function when using a big injector. (Only for compatible models) - Adjustment of fuel injection time by engine temperature and intake air temperature is possible. - It is possible to set injection timing at each rotation speed. - Various maps can be displayed in 3D graph. - Two maps can be put inside Enigma Semi-Full, and it can be switched with an external switch. - In real time, you can display tachometer, throttle opening monitor, injector opening / closing rate, oil / water · engine temperature (depending on model),Voltage (Applicable models only),air-Fuel ratio(Applicable models only). - Display the current engine speed and throttle position in real time in the fuel & ignition adjust map. - Revolution Limit can be set . - Pit-in limit can be set (Applicable model only) - Digital acceleration pump can be set. - It is possible to correct the TPS sensor according to the actual machine. - You can make several fuel data and save it, you can change it immediately when you need it. - It corresponds to Japanese and English. No pairing is necessary. On the Bluetooth setting screen, Enigma is not searched. Please turn on Bluetooth on the Bluetooth setting screen, then exit the setting screen with the Home button, launch the application, and connect from "Connect to Semi-Full" of the application.

Use your Mac from your iPad or iPhone, even when you are away from your desk. Evoke is the new name for RemotePad. Open a Mac app, edit a document, or finish a quick task from the sofa. Evoke brings your Mac screen to your iPad or iPhone with touch, scrolling, keyboard shortcuts and voice input. ONE-TIME PURCHASE Buy once and use Evoke on Mac, iPad and iPhone with the same Apple Account. No subscription or in-app purchases. WORK WITH YOUR MAC - View and control your Mac screen. - Tap, drag, scroll and type with controls designed for iPad and iPhone. - Send keyboard shortcuts and text entered by voice. - Find your Mac on the same local network and follow the setup guide. - Save a remote address for use with your own VPN. BEFORE YOU BUY A Mac running macOS 26 or later and an iPad or iPhone running iPadOS 26 or iOS 26 or later are required. Install and run Evoke on both devices. The Mac app shares its screen; the iPad and iPhone app controls it. Allow Screen Recording, Accessibility and Local Network access as prompted on your devices. Your Mac must be running and reachable. First connect on the same local network. Access from another network requires a reachable Mac address through a VPN or router port forwarding you set up separately; Evoke does not include a VPN or a cloud relay service. It controls Macs and does not connect to Windows or Linux computers.