Comparison

CLY vs MeasureMate

Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.

Head to head
About

CLY

Features
Read full description

CLY-24.8DX is a kind of APP program similar to DM24.8,CLY-24.8DX Its operation object is the second generation digital mixer product which is researched and developed independently, and it controls the device through the way of network connection with iPad. Its main function is as the followings: -24 microphone preamplifiers with dedicated trim control 24 -24 line-level inputs -8 Aux sends(4 Analog aux sends and 4 internal aux sends) -8subgroups and stereo main outs - All channels Control Room output -24 headphone output -USB record/play in main channel -100mm sliding electric fader -touchable color LCD display -24-bit/48KHz sampling rate -Program, save, load & copy functions -Digital gate -Digital compressor -Digital 4-band full parametric EQ -PAN -Phase reverse -Time delay -Scenes with digital fader and aux position reference -12 DCA for Digital Control Audio Amplifier or MUTE -Remote Control: Ethernet or USB, -Expand socket for option module:  Multi-track USB audio recording module (USB Audio Module or 32in/32 out Digital ) Requirements: * iPad with iOS9.0 or above. * a wireless router. * CLY-24.8DX Device (for control)

About

MeasureMate

Features
Read full description

Built by Jakup Andrias Knudsen, solo developer and live sound engineer. 20 years of mixing FOH and monitors and tuning PA systems. MeasureMate: the live sound engineer’s remote for Smaart®, Meyer Sound Galaxy and 10EaZy. Walk the room and keep your measurements in your hand. MeasureMate connects to your rig over Wi-Fi so you can measure, monitor and tune from the listening position. SMAART® REMOTE (V8 & V9) • Full rendering of spectrum, transfer function and SPL readouts • Two-channel spectrum for source vs. position or dual-input comparison • DiffSpec: a colour-mapped spectrograph of the difference between two inputs • Coherence masking hides unreliable phase and magnitude data below your threshold • Phase wrap boundaries you can toggle for accurate delay alignment • Custom hotkey board with Signal Generator control • Capture a new measurement in four taps or fewer • Supports Smaart® V8 (DI2) and all V9 editions (LE, RT, ST & SPL) MEYER SOUND GALAXY DSP CONTROL Adjust levels, mutes, delays and polarity on Galaxy processors in real time, right next to your Smaart® trace, without leaving the measurement position. 10EAZY SPL MONITORING Watch SPL on every 10EaZy system in the venue, with alerts when a limit gets close. Try it free for 5 minutes of connected time. BUILT-IN RTA, NO SMAART NEEDED A stand-alone real-time analyser with up to 1/24-octave resolution, a 3D spectrograph waterfall, split view and SPL with calibration against an external reference meter. Use the device microphone or any compatible audio input. BUILT FOR DARK VENUES High-contrast layouts and large touch targets for low light and gloved hands. Works on iPhone and iPad. FREE TO START, PAY ONLY FOR THE SYSTEMS YOU USE MeasureMate is free to download. Smaart, 10EaZy and the full RTA are separate unlocks, so you only pay for the systems you work with. Where offered, each comes as a monthly or annual subscription or a one-time lifetime licence, and Smaart + 10EaZy is sold as a bundle. Prices for your country are listed under In-App Purchases on this page. Galaxy control is included when connecting to Smaart systems. WHAT YOU GET FREE - Built-in RTA at 1/6 octave, no weighting - 3D spectrograph preview for 30 seconds each time you turn it on, then back to 2D - SPL readout for 5 minutes per launch - SPL calibration, kept until you close the app TRYING 10EaZy You get 10 5-minute trials. It starts when you choose it and only counts while a system is connected. A countdown shows in the nav bar and turns orange in the last minute. When it ends, every system disconnects. For a longer test, start the free trial on a subscription. THE RTA LICENCE Unlocks finer resolutions and weightings, the 3D spectrograph and SPL without time limits, and keeps your SPL calibration between launches. PRIVACY MeasureMate does not track you across other apps or websites. No data is linked to your identity. The App Privacy section on this page lists exactly what is collected. DISCLAIMER MeasureMate is an independent third-party app and is not affiliated with or endorsed by Rational Acoustics LLC, Meyer Sound Laboratories or 10EaZy. It does not include a Smaart® licence. A valid Smaart® licence from Rational Acoustics LLC is required to use the Smaart® features. Smaart® is a registered trademark of Rational Acoustics LLC. Meyer Sound and Galaxy are trademarks of Meyer Sound Laboratories, Inc. Terms of Use (EULA): https://www.apple.com/legal/internet-services/itunes/dev/stdeula/

Screenshots

MeasureMate3 screens

Verdict

The call

The clearest difference is in-app purchases: CLY at none against MeasureMate's 16. CLY also leads on iOS requirement (9.0 vs 17.6). MeasureMate's advantage is update cadence (every 5 weeks vs every 4 months). On price, ads and device support there is nothing between them.

Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS

CostPrice · In-app purchases · Ads · Monetization

Both are free to download. MeasureMate sells 16 in-app purchases, starting at $2.99 per month. CLY asks for nothing beyond the download.

UpkeepUpdate frequency

CLY ships an update every 4 months, MeasureMate every 5 weeks. The most recent releases landed on October 26, 2026 and October 30, 2026 respectively.

Scorecard3 real differences · 3 level
CLY versus MeasureMate: the parameters behind the verdict, then further details
ParameterCLYMeasureMate
PriceFreeFree
Update frequencyEvery 4 monthsEvery 5 weeks — better
AdsNoNo
In-app purchasesNo — betterYes
DevicesiPadiPhone, iPad — better
Requires iOS9.0 — better17.6
Further details — not scored
Size13 MB46 MB
Age rating4+4+
DeveloperSENSEY ELECTRONICS S.A. DE C.V.Jakup Andrias Knudsen

In-app purchases

None

CLY

No in-app purchases

16 purchases

MeasureMate

Subscriptions10
  • V8 + DI2 Monthly Subscription7 Days trial$2.991 Month
  • V9 Monthly Subscription7 Days trial$2.991 Month
  • 10EaZy, Monthly7 Days trial$3.991 Month
Show 7 more
  • V8 + V9 Monthly Subscription7 Days trial$4.991 Month
  • Smaart + 10EaZy, Monthly7 Days trial$7.991 Month
  • V8 Annual Subscription14 Days trial$34.991 Year
  • V9 Annual Subscription14 Days trial$34.991 Year
  • 10EaZy, Annual14 Days trial$39.991 Year
  • V8 + V9 Annual Subscription14 Days trial$55.001 Year
  • Smaart + 10EaZy, Annual14 Days trial$79.991 Year
One-time6
  • RTA$19.99
  • 10EaZy Perpetual$169.99
  • V8 Lifetime Access$199.99
Show 3 more
  • V9 Lifetime Access$199.99
  • V8 + V9 Lifetime access$349.99
  • Smaart® + 10EaZy$469.99

Questions

Is CLY free?
CLY is free to download, with no in-app purchases.
Is MeasureMate free?
MeasureMate is free to download, with in-app purchases available.
Do CLY or MeasureMate have ads?
Neither CLY nor MeasureMate shows ads.
Which is updated more often, CLY or MeasureMate?
CLY ships an update every 4 months, and MeasureMate every 5 weeks. Most recently, CLY was updated on October 26, 2026 and MeasureMate on October 30, 2026.

Other comparisons