Caravan Leveler vs My CamperLevel

Stop running in and out of the door to check the level. Caravan Leveler turns your iPhone into a levelling sensor that tells you exactly what to do: which side to raise, which end, and by how many centimetres — then lets you read it from wherever you are standing. KNOW EXACTLY WHAT TO RAISE - Front and side silhouettes of your vehicle tilt in real time, with the angle to a tenth of a degree - Plain instructions: "Raise the right side ≈ 6.3 cm", then "Raise the front ≈ 2.4 cm" - Side to side first, then front to back — the order that actually works MADE FOR CARAVANS AND MOTORHOMES - Caravan: wind the jockey wheel up or down and chock a side — the app says which way and how far - Motorhome and autocamper: it knows you can only drive onto ramps, so it only ever asks you to raise, and names the wheels - If the ground is too steep for any ramp, it says so instead of quoting a number no ramp can reach - Air suspension? It reminds you to let it settle before you trust the reading SEE THE MOMENT YOU'RE LEVEL - Silhouettes, spirit-level bubble and readout all turn green when you get there - Choose the silhouettes, the bubble, or both on one screen - Drive-on guidance beeps faster as you approach level and chimes when you arrive, so your eyes can stay on the ramps. It ducks your music or radio instead of stopping it READ IT FROM OUTSIDE - Leave the sensor iPhone inside, flat on the floor or a worktop - A second iPhone or iPad connects directly and shows the live level — no Wi-Fi, no internet, no account - Or check it on your Apple Watch while you wind the steadies - Your vehicle type and display choice follow along to every device automatically - Streaming from the sensor iPhone to a Watch or second device comes with a Week Pass, Season Pass or Annual Premium, after a 24-hour trial. Levelling on the iPhone itself, and the display device, are always included MEASURE ONCE, RAISE EXACTLY - Two quick tape-measure readings — between the wheels, and from the wheel to the front support or across the wheelbase — turn degrees into centimetres - A visual guide shows exactly where to hold the tape CALIBRATE ON ANY SURFACE - If the surface under your iPhone isn't quite parallel to the chassis, level the vehicle once and hold to calibrate - Reset it with a tap whenever you move the phone AND A FEW MORE THINGS - Sun direction: see where the sun is relative to your vehicle, and park for shade or solar - Siri and Shortcuts: switch vehicle type, turn drive-on guidance on or off, change mode and calibrate by voice - In English, Danish, German, Dutch, Norwegian and Swedish Terms of Use (EULA): https://www.apple.com/legal/internet-services/itunes/dev/stdeula/

My CamperLevel turns your phone into a digital bubble level for your RV, camper or travel trailer. Measure tilt and check your vehicle while leveling it at your campsite. Place one device inside your vehicle and see at a glance whether your camper is level. CamperLevel shows the tilt live and can tell you which side needs adjusting while you work outside. Ideal at your campsite: • Place your phone inside the camper • Adjust the vehicle • See whether the front, rear, left, or right side is too high Highlights • Live leveling aid for motorhomes and travel trailers • Clear front, rear, left, and right guidance • Voice prompts such as “front too high,” “left side too high,” and “level now” • Device zeroing on a known level surface • Two-device mode: one device measures inside while another displays the values outside • Direct connection between devices • Simple, high-contrast display • Made for campsites, RV parks, and travel How it works 1. Zero the device once on a level surface 2. Place the phone inside your motorhome or travel trailer 3. Adjust the vehicle until CamperLevel confirms that it is level CamperLevel is for anyone who wants to level a camper quickly and clearly—without guesswork. Voice guidance uses the system voices available on your device. Two-device mode requires the app on both devices. Connection and range depend on your devices and surroundings. Try 10 free measurements. After that, a one-time Premium in-app purchase unlocks further measurements. Display-only mode on a second device remains free. No subscription. View your iPhone’s measurements on a paired Apple Watch. The iPhone remains the measurement source; the Watch does not measure independently.