Pypley vs Pipe Flow Liquid Flow Rate
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
Pypley
Calculate and analyze pumped pipe systems on your iPhone. This tool helps engineers determine pump operating points, check for cavitation, and analyze pressure loss across pipes and fittings. It supports a wide range of fluids, pipe materials, and equipment for comprehensive system analysis.
- Pump operating point calculation
- Cavitation check (NPSH)
- Pressure loss analysis
- Pump curve import/creation
- Fluid and pipe libraries
- System diagram generation
- Offline functionality
Read full descriptionHide full description
Size and check pumped pipe systems on your iPhone. Describe the fluid, pipes, pump and suction side, tap Calculate, and Pypley finds where the pump will run, shows where every psi goes and checks for cavitation. Free to download, with one full project and every feature included. A one-time purchase unlocks unlimited projects. No subscription, no ads. WHERE WILL THE PUMP RUN? • Operating point on the pump and system curves, with efficiency and shaft power • Speed changes and impeller trims with the affinity laws • Viscous fluid correction to ANSI/HI 9.6.7 • A duty finder that ranks library pumps by efficiency at your flow and head WILL IT CAVITATE? • NPSH available against NPSH required, with ANSI/HI 9.6.1 margins for your service: general, building services, water, chemical, hydrocarbon, cooling water or boiler feed • Atmospheric pressure corrected for your site's altitude • Every suction loss itemized, so you can see what is using up your margin WHERE DOES THE PRESSURE GO? • Every pipe, fitting and valve itemized, with its share of the pump head • Friction from Colebrook–White, with roughness for 69 pipe materials • Notes that flag negative pressure, velocities outside guidance, pumps running outside their preferred range and check valves that aren't fully open, each with a suggested fix PUMP CURVES FROM A PHOTO OR PDF • Calibrate the axes, then tap along the head, efficiency and NPSHr curves • Polynomial fit, with CSV export • Or choose a generic 50 Hz or 60 Hz pump from the library, import a CSV or enter the curve by hand CLOSED LOOPS, CHILLERS AND HEAT EXCHANGERS • Open tanks, pressurized tanks and closed loops • Expansion vessel sizing to EN 12828, with pre-charge and safety valve checks • Local pressure at every point around the loop • 14 types of rated equipment, including chillers with the AHRI 550/590 test tolerance, entered from the datasheet and corrected to your fluid • Plate, shell-and-tube, coil and double-pipe heat exchangers estimated from their geometry LIBRARIES • 413 fluids, from water and glycols to oils, fuels and acids, with density, viscosity and vapor pressure across temperature • Pipe sizes from 16 standards, including ASME B36.10M, ASTM, AWWA, EN and ISO • 20 check valve types, orifices, strainers, filters and packed beds • A Kv and Cv library of fittings and valves up to NPS 48, including HVAC balancing and triple-duty valves • Save your own pumps and fittings to reuse in any project REPORTS • Share a PDF report with the system diagram, curves, losses and notes • Export the results to CSV BUILT FOR ENGINEERS • US customary or metric units, switchable at any time • Everything is calculated on your iPhone, so it works offline • Projects sync across your devices with iCloud • Model Check shows what's missing before you calculate • A step-by-step guide, searchable help and a glossary
Pipe Flow Liquid Flow Rate
Calculate fluid flow rate in pipes, including friction and fitting losses, using accurate engineering equations. Features extensive databases for liquids, pipes, and fittings, with customizable units and reporting options.
- Fluid flow rate calculation
- Friction and fitting loss calculation
- Extensive material and fluid databases
- Customizable units (Imperial/Metric)
- Professional Excel and PDF reports
- Results verification against published data
Read full descriptionHide full description
Pipe Flow Liquid Flow Rate is a flowrate calculator app from Pipe Flow Software that calculates the fluid flow rate in a pipe for a given pressure loss (includes friction losses and fitting losses). It uses the Darcy-Weisbach equation with Colebrook-White friction factors, together with K values for fittings, to provide accurate calculations. Pipe Flow Software applications are used by engineers in over 100 countries worldwide. The Liquid Flow Rate App has an intuitive user interface that allows for easy entry of input data, including changes in elevation, and selection of valves & fittings. Comprehensive results include Reynolds number, friction factor, friction losses, fitting losses, fluid velocities and more. Each result is clearly displayed using expandable sections that reveal further information as needed. Users can select pipe materials, pipe diameters, pipe fittings (k factors) and liquids from the integrated databases, and these can also be extended with user specific data for custom pipe materials, diameters, fittings, and liquids. The App can operate in Imperial or Metric units and each individual field can be further customised to use a specific unit. Results values can be displayed to a specified number of decimal places. The Liquid Flow Rate calculation results have been verified against multiple cases of published data from well known sources. The results of these calculations are included in the Results Verification PDF document which can be accessed from within the App. Engineers can easily perform their flow rate calculations in the office or on site. Professional Excel and PDF reports can easily be shared with others. Results can also be saved to the library within the App. The Pipe Flow Liquid Flow Rate software has unrivalled functions and features: - Liquid properties database for water, oils, acids, and other fluids. - Pipe material database for various Steel, Aluminium, Copper, HDPE, and other pipes. - Fitting database for standard valves and bends, with associated K factor values. - User definable custom materials, fluids and fittings. - Professional Excel and PDF reports showing calculation results. - Results verification against published data to provide confidence in the calculation results. - Configurable post decimals for display on screen and in reports. - Automatic conversion between a wide range of units. - Compatibility with Pipe Flow Wizard files for iOS, macOS and Windows. - Calculations based on the same reliable calculation engine that is used by Pipe Flow Software's premier Pipe Flow Expert software, which is trusted by users in over 100 countries worldwide. - High quality, reliable software, and unrivalled customer support. Pipe Flow Liquid Flow Rate is offered as a free trial download and can be purchased for a one-time fee within the App. Terms of Use: https://www.pipeflow.com/pipe-flow-mobile-software/pipe-flow-mobile-software-license-terms
Screenshots
Verdict
The clearest difference is price: Pipe Flow Liquid Flow Rate at Free against Pypley's $2.99. Pipe Flow Liquid Flow Rate also leads on device support (3 vs 1) and iOS requirement (11.0 vs 17.0). On update cadence, ads, in-app purchases and monetization model there is nothing between them.
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
Pipe Flow Liquid Flow Rate is free to download; Pypley costs $2.99 up front. Pypley sells 1 one-off in-app purchase and Pipe Flow Liquid Flow Rate sells 1 one-off in-app purchase. Whichever you choose, the download price is not the number that matters.
Pypley ships an update every 3 weeks, Pipe Flow Liquid Flow Rate fortnightly. The most recent releases landed on November 15, 2026 and November 11, 2026 respectively.
| Parameter | Pypley | Pipe Flow Liquid Flow Rate |
|---|---|---|
| Price | $2.99 | Free — better |
| Rating | — | 4.9 (8 ratings) — better |
| Positive reviews | 83.3% of reviews | — |
| Number of ratings | — | 8 — better |
| Update frequency | Every 3 weeks | Fortnightly — better |
| Ads | No | No |
| In-app purchases | Yes | Yes |
| Monetization | Free with in-app purchases | Free with in-app purchases |
| Devices | iPhone | iPhone, iPad, iPod — better |
| Requires iOS | 17.0 | 11.0 — better |
| Further details — not scored | ||
| Size | 8 MB | 67 MB |
| Age rating | 4+ | 4+ |
| Developer | Ali Mohammed | Pipe Flow Software |
Customer experience
Pypley
Pipe Flow Liquid Flow Rate
In-app purchases
Pypley
- Unlimited Project$19.99
Pipe Flow Liquid Flow Rate
- Pipe Flow Flow Rate$4.99
Questions
Is Pypley free?
Is Pipe Flow Liquid Flow Rate free?
Do Pypley or Pipe Flow Liquid Flow Rate have ads?
Which is updated more often, Pypley or Pipe Flow Liquid Flow Rate?
Other comparisons















