Pypley vs GPS for Driver+
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
Pypley
Calculate and analyze pumped pipe systems on your iPhone. This tool helps engineers determine pump operating points, check for cavitation, and analyze pressure loss across various components. It supports a wide range of fluids, pipe types, and equipment, generating detailed reports for system design and verification.
- Pump operating point calculation
- NPSH available vs. required analysis
- Pressure loss breakdown
- Pump curve import and analysis
- Closed loop and heat exchanger modeling
- Extensive fluid and pipe libraries
- PDF report generation
Read full descriptionHide full description
Size and check pumped pipe systems on your iPhone. Describe the fluid, pipes, pump and suction side, tap Calculate, and Pypley finds where the pump will run, shows where every psi goes and checks for cavitation. Free to download, with one full project and every feature included. A one-time purchase unlocks unlimited projects. No subscription, no ads. WHERE WILL THE PUMP RUN? • Operating point on the pump and system curves, with efficiency and shaft power • Speed changes and impeller trims with the affinity laws • Viscous fluid correction to ANSI/HI 9.6.7 • A duty finder that ranks library pumps by efficiency at your flow and head WILL IT CAVITATE? • NPSH available against NPSH required, with ANSI/HI 9.6.1 margins for your service: general, building services, water, chemical, hydrocarbon, cooling water or boiler feed • Atmospheric pressure corrected for your site's altitude • Every suction loss itemized, so you can see what is using up your margin WHERE DOES THE PRESSURE GO? • Every pipe, fitting and valve itemized, with its share of the pump head • Friction from Colebrook–White, with roughness for 69 pipe materials • Notes that flag negative pressure, velocities outside guidance, pumps running outside their preferred range and check valves that aren't fully open, each with a suggested fix PUMP CURVES FROM A PHOTO OR PDF • Calibrate the axes, then tap along the head, efficiency and NPSHr curves • Polynomial fit, with CSV export • Or choose a generic 50 Hz or 60 Hz pump from the library, import a CSV or enter the curve by hand CLOSED LOOPS, CHILLERS AND HEAT EXCHANGERS • Open tanks, pressurized tanks and closed loops • Expansion vessel sizing to EN 12828, with pre-charge and safety valve checks • Local pressure at every point around the loop • 14 types of rated equipment, including chillers with the AHRI 550/590 test tolerance, entered from the datasheet and corrected to your fluid • Plate, shell-and-tube, coil and double-pipe heat exchangers estimated from their geometry LIBRARIES • 413 fluids, from water and glycols to oils, fuels and acids, with density, viscosity and vapor pressure across temperature • Pipe sizes from 16 standards, including ASME B36.10M, ASTM, AWWA, EN and ISO • 20 check valve types, orifices, strainers, filters and packed beds • A Kv and Cv library of fittings and valves up to NPS 48, including HVAC balancing and triple-duty valves • Save your own pumps and fittings to reuse in any project REPORTS • Share a PDF report with the system diagram, curves, losses and notes • Export the results to CSV BUILT FOR ENGINEERS • US customary or metric units, switchable at any time • Everything is calculated on your iPhone, so it works offline • Projects sync across your devices with iCloud • Model Check shows what's missing before you calculate • A step-by-step guide, searchable help and a glossary
GPS for Driver+
Read full descriptionHide full description
GPS for driver Plus cuenta con el mejor sistema de seguridad para tu vehículo lo que nos caracteriza como empresa Nº 1 en recuperación. Con nuestra App podrás localizar tu vehículo en todo momento, activar bloqueo de motor y contarás con funciones adicionales para asistencia técnica.
Screenshots
Verdict
The clearest difference is price: GPS for Driver+ at Free against Pypley's $2.99. GPS for Driver+ also leads on in-app purchases (none vs 1) and device support (3 vs 1). Pypley's advantage is update cadence (every 2 weeks vs every 48 months). On ads there is nothing between them.
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
GPS for Driver+ is free to download; Pypley costs $2.99 up front. Pypley sells 1 one-off in-app purchase. GPS for Driver+ asks for nothing beyond the download.
Pypley ships an update every 2 weeks, GPS for Driver+ every 48 months. The most recent releases landed on November 16, 2026 and November 7, 2026 respectively.
| Parameter | Pypley | GPS for Driver+ |
|---|---|---|
| Price | $2.99 | Free — better |
| Positive reviews | 83.3% of reviews | — |
| Update frequency | Every 2 weeks — better | Every 48 months |
| Ads | No | No |
| In-app purchases | Yes | No — better |
| Monetization | Free with in-app purchases | — |
| Devices | iPhone | iPhone, iPad, iPod — better |
| Requires iOS | 17.0 | 15.0 — better |
| Further details — not scored | ||
| Size | 8 MB | 26 MB |
| Age rating | 4+ | 4+ |
| Developer | Ali Mohammed | salvador lemus |
In-app purchases
Pypley
- Unlimited Project$19.99
GPS for Driver+
No in-app purchases
Questions
Is Pypley free?
Is GPS for Driver+ free?
Do Pypley or GPS for Driver+ have ads?
Which is updated more often, Pypley or GPS for Driver+?
Other comparisons















