Electrical Calculator vs NEC Load Calculator

Filling out a panel schedule and need to check if total connected load passes the NEC 80% continuous load rule? Add your circuits, see kW totals, and get an instant panel utilization percentage — before the inspector shows up. Add circuits with name, voltage, phase, and amperage. The app calculates each circuit's watt load, tracks total connected load, and checks the 80% continuous load rule against your panel rating. WHAT IT CALCULATES: - Total connected load in W and kW - Per-circuit watt load from volts, amps, and phase - Panel utilization percentage with color-coded status - Total amperage at your panel voltage - Overload warning when utilization passes 80% VOLTAGE CONFIGURATIONS: - 120V, 208V, 240V, 277V, 480V - Single phase and three phase KEY FEATURES: - Editable panel schedule with swipe-to-delete and Clear All - NEC 80% continuous load rule check against your main breaker - Enter any main breaker amperage and panel voltage - Watt totals per circuit, W/kW total for the panel - Works completely offline Built for licensed electricians, electrical engineers, and building inspectors.

NEC Load Calculator answers panel sizing, feeder, motor, branch circuit, and cable tray questions directly from the 2023 NEC — with the article citation and math shown for every result. Built for licensed electricians and contractors, not students. CALCULATION MODULES Residential Dwelling unit service sizing per NEC 220.40–220.55 and 220.82. Standard and optional methods. General lighting, small appliance and laundry circuits, fixed appliances, dryer, cooking equipment, HVAC, and service sizing with 230.79(C) minimums. Commercial Feeder and service load calculations per NEC 220.12, 220.44, 220.60, 430.24. Lighting, receptacles, motors, HVAC units, sign circuits, and demand factors. Supports 220/127V and 440/254V systems alongside standard US voltages, with a built-in reminder to verify against NOM-001-SEDE where applicable. Branch Circuit Conductor and OCPD sizing per NEC 210.19, 310.12, 310.15(B)(1)(a). Continuous load handling, conduit fill derating, ambient temperature correction. Covers 120V through 480V circuits, including 127V, 220V, 254V, and 440V. Motor Conductor, overload, and OCPD sizing per NEC 430.22, 430.32, 430.52. Full motor table lookups by horsepower, voltage, and phase. Panel Schedule Circuit-by-circuit panel editor with phase balance, loading percentage, and imbalance calculations per NEC 220.40 and 220.87. Cable Tray Tray fill and ampacity derating per NEC 392.22(A) and 392.80(A). Ventilated trough and solid-bottom tray types, small-cable fill-area limits, and the 90% width rule for large-cable diameter sums. RESULTS SHOW THE CALCULATION Every result includes the NEC article reference, the demand factor table used, and the step-by-step math — not just a final number. Built to be checked against the code book. PANEL LAYOUT Generate a panel layout directly from a load calculation: circuit numbers, breaker sizes, two-pole spans, and spare spaces, arranged the way a real panelboard is wired. Hand off into the full Panel Schedule editor to adjust circuit labels, phase assignment, or breaker sizes. PDF EXPORT Export any result as a PDF report for permit submission, job documentation, or client records.