1.6.3
February 9, 2024
Minor improvements
1.6.2
July 4, 2023
Bugfixes: EMpower PROset ECP control gear: In some cases emergency luminaires with control gear EMpower PROset ECP could not be addressed.
More1.6.0
November 15, 2022
New features: - the NFC connection to the EMpower PROset ballast is now possible also using iPhones / iOS mobile devices. This enables the user to read out and configure the EMpower PROset ballasts using the iOS mobile devices without the aid of the PROset Pen. - immediately after reading out the ballast, the app provides a link to the luminaire datasheet as well to the Zumtobel eShop. The App also lists all relevant spare parts for the luminaire and provides a link to Zumtobel eShop. This way the user can easily order the needed components in case a defect has occurred. - the App offers further information on the EMpower PROset ballast: current HW&FW-Version as well as the luminaire type: exit sign/safety luminaire. - spare part ballasts can be now configured directly without the need of a prior power cycle. Additional features for the EMpower PROset ExD (E1D, E3D, E8D) ballast: - signalize the current status of the luminaire. In case of an error, the type of error is shown. The error status information is available starting with the FW-Version 1.0.35 of the ballast. - enable the visualization and configuration of the Status LED Intensity - allow the deactivation of the Autotest feature, converting the luminaire to a Manual test version. - enable the configuration of the switching mode: maintained/non-maintained/switched maintained Additional features for the EMpower PROset ECP ballast: - visualization of the eBox sub-distribution and output circuit number - possibility to correct the ballast random address in case it was wrongly stored Additional features for the EMpower PROset ELP ballast: - visualization of the nBox controller device-ID & output circuit where the ballast was installed - visualization & configuration of the PLC carrier frequency Further improvements: - NFC connection: user is notified in case the mobile device NFC-interface is not enabled - Bluetooth connection: user is allowed to enable the mobile device BLE-interface in case it is not yet enabled - luminaires configurations are automatically loaded on PROset App startup each time a new ballast configuration is available
More1.5.3
February 4, 2021
Rebranding
1.5.0
November 18, 2020
Support for the EMpower PROset ELP 48V control gears - configuration of address, switching mode and control value in mains and emergency operation - device exchange (via copy function and via the database) - blackbox feature Extended support for the EMpower PROset ECC control gear - configuration of the control value in emergency operation
More1.2.0
April 13, 2019
- now also centrally supplied emergency luminaires ECD, ECP and ECC can be configured and maintained via the PROset App - the function READ allows you to see configured values (e.g. the set address) directly in the application, without the need of connecting and disconnecting the luminaire from the mains supply - BLUETOOTH CONNECTION: if several PROset Pen are within reach of the application, the desired Pen can be identified by its serial number. The serial number can be found on the label
More1.1.1
July 12, 2018
Addressing, configuration and maintenance of emergency luminaires via NFC interface
1.1.0
June 15, 2018
- Addressing, configuration and maintenance of emergency luminaires via NFC interface - Data Privacy Statement
1.0
April 12, 2018
Yes, PROset App has support for iPad devices.
The PROset App app was made by Zumtobel Lighting Gmbh.
Your iOS device must have at least iOS 12.4 installed to use the app.
No ratings are available for the PROset App app yet.
The Main Genre Of The Proset App App Is Utilities.
The latest PROset App version released is 1.6.3.
The last update for PROset App was on October 4, 2024.
PROset App was first released on February 6, 2023.
This app is appropriate for all ages, with no offensive or inappropriate content.
PROset App is available in American English.
Sorry, PROset App is not on Apple Arcade.
Sorry, in-app purchases are not available for users of PROset App.
No, you cannot use PROset App with Apple Vision Pro.
No, users are not exposed to ads in PROset App.