Daintree EZ Connect

September 23, 2024

This update includes the following new features: - Adds support for new Transition to Off Time setting in zones and profiles

September 14, 2023

This update includes the following new features: - Support adding switches and sensors to multiple Zones in a Room - Support WWD2-4 switch in dual dimmer switch personality - Create up to six Zones in a Room for any hardware type - Support multiple WA220/WA230 room controllers up to 6 relay outputs - Support unlimited number of WWD2 switches in a Room - More intuitive page layout and navigation for Zoning and Scenes - Adds new Auto ON @ Background strategy for Occupancy (firmware update required) - Adds new Low-End Trim setting for Dimming - Apply custom names to zones, switches, and scenes within a Room - Default channel selection for new Rooms is now Automatic ** Note that none of new features are not available for the WIT100 sensor We've fixed the following issues to improve the stability of the App: - Incorrect Daylighting behaviour when Occupancy feature is disabled - Restarting phone Bluetooth after firmware upgrade no longer needed - App occasionally crashes after certain Scene configurations are saved - App occasionally crashes after removing ownership of a Room - App crashes in rare cases when applying certain types of settings Profiles - App crashes in rare cases when connecting to an older Room - Occupancy enable/disable button occasionally freezes - Back button to exit Room screen occasionally disappears - Too many warnings shown when using the App with GPS enabled - Devices aren't detected by app when using iOS 12 - Faster page loading after exiting a Room to main menu - Faster response to errors in removing a switch/sensor from Room - Minor issues with form length and format validations - Minor color, layout, and alignment issues on some pages

September 20, 2022

This update includes the following new features*: - Supports WOS3 occupancy/daylight sensor - Supports WWD2-4 scene controller switch (latest firmware required) - Supports WA220 in two-zone and WA230 in three-zone configurations (latest firmware required) - New mode for updating firmware on all nearby devices at once - New control for identifying all lights in a room or zone at once - Warn user while configuring Room if not all devices were found - Improved user interface layout for switches page We've fixed the following issues to improve the stability of the App: - Errors when aborting in progress WWD2 switch add - Errors when retrying after a WWD2 switch add failure - Resolves a rare error preventing ZBT switch add from succeeding in large networks - Unable to select new light sensor node for WA200 after deleting the previous one - Star and Loading icons displayed on top of each other - Removes incorrect option for creating rooms using wireless channel 26 * Note that these new features are not available for the WIT100 sensor

April 1, 2022

This update includes the following new features: - Adds "Edit" button to make deleting objects easier to find in the user interface These new features are not available for the WIT100 sensor: - Support for WIZ20 occupancy/daylight sensor - Support for WA210 zone controller device - Support for WWD2-2 wireless wall dimmer switches - Group settings into Dimming, Occupancy, and Daylighting categories - Can disable occupancy detection functionality if desired - Add Occupancy "control strategy" setting and remove "grace time" - Rename "settling time" as "dwell time" for better clarity - Replace "0"/"1" settings with "On"/"Off" for better clarity - Shorten identify pattern from 60 seconds to 5 seconds - Replace "chain link" with "data transfer" icon for better clarity - Adds "diagnostics" feature to display technical information for troubleshooting - Adds reminder to user to use Automatic channel selection for best performance We've fixed the following issues to improve the stability of the App: - Camera zoom is too high by default on recent model phones when scanning barcodes - "Hold Time" setting description specified the wrong units (secs instead of minutes) - Wrong channel listed when adding a switch right after creating a room with "auto" channel - Fixes an issue causing settings save to fail in large networks of WHS20 sensors - Fixes an issue causing app to freeze after an error while selecting a node to join room - Fixes an issue causing app to freeze after an error while fetching node details info - Fixes an issue causing app to crash upon immediately existing a newly created room - Fixes an issue causing the app to crash occasionally if no nearby sensors are found - Fixes an issue where device scanning may not restart after finishing commissioning - Fixes an issue where room node count was incorrectly labelled as a “room” count

October 25, 2021

This update includes the following new features: - Adds daylight harvesting calibration for WHS20 sensors - Adds an audible alert when a device firmware update finishes - Extend maximum switches per room from four to five - Show support identifier of nearby rooms belonging to other users - Cache sensor firmware between updates to reduce data consumption - Improve clarity of daylight harvesting settings descriptions - Add description to indicate character length limits for room names - Prevent screen lock during room commissioning operations - WHS20 Sensor: Add built-in settings profiles to help new users get started - WHS20 Sensor: Allow user to select desired settings profile during room creation - WHS20 Sensor: Allow switch to be used in either orientation (Requires firmware v5.0+) - WHS20 Sensor: Improve switch commissioning time (Requires firmware v5.0+) - WHS20 Sensor: Block user from adding switches while sensor commissioning is already active - WHS20 Sensor: Add "Repair" feature to reconfigure room if sensors are not working correctly - WHS20 Sensor: Check that firmware is up to date during room connection We've fixed the following issues to improve the stability of the app: - Remind users to reset Bluetooth after updating firmware - Improved signal strength determination when selecting closest nodes - Improved visual alignment of certain elements throughout the application - Improved description of Grace Time setting for WHS20 sensors - Fixes a bug preventing adding nodes to a room after long inactivity - Fixes a bug that could cause the app to freeze after aborting room creation - Fixes a bug preventing closing the new account creation dialog screen - Fixes a bug causing the node to temporarily still appear after being reset - Fixes several misspellings throughout the application - Shorten WHS20 device identifiers to improve visual layout - Removes unneeded "Edit" button from certain firmware selection pages - Fixes an issue that can occasionally block the user from performing a password reset - Fixes an issue causing slow responsiveness of the user interface for large networks

June 16, 2021

This update includes the following new features: -Support for WHS20 wireless high bay sensors -Support for wireless firmware update of WHR1 wireless handheld remotes We've fixed the following issues to improve the stability of the App: -Resolves issues with the "Back" button during room commissioning -Added on-screen message text when maximum switch count for room is reached

November 18, 2020

We've fixed the following issues to improve the stability of the App: -Fixes an account login error that sometime occurred when waking from sleep -Fixes an issue where room switch list fails to load immediately after room creation -Fixes an issue preventing user from leaving a room after aborting room creation -Removes unnecessary Edit button from room switches list

November 6, 2020

This update includes the following new features: - Allows user to create Teams and share Rooms with entire Teams - Updated color scheme throughout the application - Apply signal strength averaging for sensor devices - Adds ability to change the name of existing rooms - Adds warning text when account is locked after failed logins - Displays app version number from Account page We've fixed the following issues to improve the stability of the App: - Switches could not be deleted if commander sensor is powered off - Fixes an error causing the sensor to receive multiple disconnects

September 1, 2020

We've fixed the following issues to improve the stability of the App: - Fixed an issue where text fields are invisible when using iOS Dark Mode

August 24, 2020

This update includes the following new features: - Added ability to remotely manage your Rooms from the Account tab - Automatic reminder to share Room access with others after creating - Support for scanning switches with 3D barcodes instead of 2D - Added new page to assist with changing wireless channel on switches - Added ability to download latest sensor firmware via the Internet - Added ability to share updated sensor firmware with the entire room - Added additional error handling to improve firmware upgrade process - Reduced loading screen time delay after creating a new room - Improved login screen design for better usability on some devices - Autofill last used email address on login and password reset forms - Now hiding screen contents when app is backgrounded for user privacy - Update GE Current, a Daintree Company branding and logo We've fixed the following issues to improve the stability of the App: - Resolved multiple error handling bugs causing occasional application crashes - Fixed an Unauthorized error that could appear after long inactivity periods - Fixed multiple communication issues causing excessive network traffic - Fixed multiple communication issues causing errors while connecting to sensors - Fixed a communication issue causing the scan for nodes process to become stuck - Fixed an issue incorrectly causing the signal strength to appear as +127 or N/A - Added error handling and retrial mechanism while adding a switch - Added cancel option to abort failed room creation process - Added controls to prevent adding more than the maximum allowed 5 switches to a Room - Handling for latest iOS 13 swipe gestures in text fields and navigation forms - Detect when another user has added or removed devices from the current room