Does not work.
Only shows >>"Waiting for device…" on Mac.
( UPDATE - does work with non Chinese USB cable, but does not fix my device - no further updates are available - so it is a hardware problem )
My ISDT Charger Q6 Nano is virtually impossible to use due to a very poor joystick which is flacky AF.
You can never judge what your input might do - eg go left right up down or enter ( For any input )
( UPDATE - does work with non Chinese USB cable, but does not fix my device - no further updates are available - so it is a hardware problem )
My ISDT Charger Q6 Nano is virtually impossible to use due to a very poor joystick which is flacky AF.
You can never judge what your input might do - eg go left right up down or enter ( For any input )
Show less
The most stupid apps ever
Better to work without it. The BT drops all the time, the apps don’t keep the previous setting, impossible to change sometimes. How can a so nice hardware can have a so lame software. Blame the developers
Looks good, preforms bad
Downlaoded for 16N, shows 8n is device it is seeing. says latest firmware is N Series V1.2.0.5 and what is on the device that it destroyed 3500mAh Li Ion AA's says Current Version is V1.2.0.6 so version on device is newer that what is on website.
TERRIBLE!
Just purchased K4, came with firmware 1.0.0.6.
Downloaded ISD GO for Mac.
Opened it.
Plugged in USB - Go saw my unit and showed correct firmware installed.
I clicked on "Check for updates".
Showed latest is 1.1.0.19
As a retired software developer I knew that is a huge number of releases from what is in my K4.
Clicked on Update.
Started - stalled - clicked on Update and it continued for 3 seconds - this continued for at least a dozen clicks on updates. I actually waited 1/2 hours before the first time I clicked on Update but the bar indicator indicated it was just stalled.
Now, finally finised the "Install" message appeared. As routine I did a Check for update BUT it showed it had not installed the update.
I have now tried 3 times to install the latest firmware.
No luck AND THE K4 IS LOCKED ON ITS SCREEN SHOWING "UPDATE" - NEVER DID THE K4 SCREEN GIVE ANY INDICATION IT WAS INSTALLING OR INSTALLATION WAS COMPLETE.
NOW, THE K4 IS LOCKED UP!!!
HORRIBLE PROGRAMMING BY ISDT.
Downloaded ISD GO for Mac.
Opened it.
Plugged in USB - Go saw my unit and showed correct firmware installed.
I clicked on "Check for updates".
Showed latest is 1.1.0.19
As a retired software developer I knew that is a huge number of releases from what is in my K4.
Clicked on Update.
Started - stalled - clicked on Update and it continued for 3 seconds - this continued for at least a dozen clicks on updates. I actually waited 1/2 hours before the first time I clicked on Update but the bar indicator indicated it was just stalled.
Now, finally finised the "Install" message appeared. As routine I did a Check for update BUT it showed it had not installed the update.
I have now tried 3 times to install the latest firmware.
No luck AND THE K4 IS LOCKED ON ITS SCREEN SHOWING "UPDATE" - NEVER DID THE K4 SCREEN GIVE ANY INDICATION IT WAS INSTALLING OR INSTALLATION WAS COMPLETE.
NOW, THE K4 IS LOCKED UP!!!
HORRIBLE PROGRAMMING BY ISDT.
Show less
iPad 12.9 Successfully Repaired damaged FW for fd-200 !
Yes, you read that correct. I tried many devices a year ago to get this stupid device to work. Mine came titled as brand new but someone had opened previously. After this method I am having no disconnecting issues. It was simply an error on the devs programming. I tried my iPhone, SamsungS8 & S2, iPad 11”. Then recently after a year past my OG purchase I tried it on my iPad Pro 3rd gen 12.9 running iOS13.3
Show less
Won’t Stay Connected
I just got the FD-200 and the app will sometimes connect and let you make changes but it always disconnects while discharging. Doesn’t matter where my phone is, next to it on either side, on top, in front or behind it still disconnects.
Times out/disconnects
Using it with an FD200 discharger. The app is useless it disconnects from discharger or does not connect. Also when lucky enough to get it to work the unit keeps discharging batteries regardless of parameters selected on the app. Renders the FD200 useless as it will continue discharging lipo batteries below the point of no return. Shame as it was a functional product before the latest update.
Show less
App needs to be fixed to work properly like iOS app and FD-200.
Most I am able to do with the app and FD-200 on my iPhone is select my parameters and start the discharge process. Shortly after it disconnects and won’t connect again for the whole process.
The discharge process on the FD-200 completes as it should for what it was initially configured. So long as you set end voltage and current, the cycle will automatically end there not draining your packs excessively.
This has been an issue for over a year now, that I have seen absolutely no improvements made for it whatsoever. I brought it to the attention of some of the folks at Isdt but they must not have thought it was important. I sincerely hope to see this get fixed soon getting the attention it deserves.
The discharge process on the FD-200 completes as it should for what it was initially configured. So long as you set end voltage and current, the cycle will automatically end there not draining your packs excessively.
This has been an issue for over a year now, that I have seen absolutely no improvements made for it whatsoever. I brought it to the attention of some of the folks at Isdt but they must not have thought it was important. I sincerely hope to see this get fixed soon getting the attention it deserves.
Show less
Fd200 Bluetooth
Fd200 Bluetooth disconnect all the time useless now do not get this discharger
App does not stay connected via Bluetooth
I have 2 ISDT FD-200 dischargers which I’ve tried to connect to via Bluetooth however they disconnect after a few seconds of being connected or when you try to update the settings.
