$4.99 $15.99
⭐️4.3 / 5
Rating
🙌11
Ratings
📼1 sc
Content
📦~ in 3 weeks
Updates frequency
- Versions+1
- Price History
- Description
- FAQ
All Versions of WoodStepper
4.1.1
July 1, 2024
Factory presets and samples not copied to user space any longer but read from the package.
Added more factory samples.
More4.0.4
May 11, 2023
- Fixed Ableton Link on iOS 14
- Fixed save/restore of "Osc3 phase mod by Smpls" setting.
More4.0.2
October 27, 2021
- fixed bug in displaying start and end of samples in sample display graph when sequencer is not running.
More4.0
October 24, 2021
- Samples, TrackAudio and the 3 Oscillators can now be used in parallel.
- All sources now have a step gain allowing for a different mixture per step.
- All (almost) existing OSC params are changed into a STEP parameter.
- Added Variations (Vari) panel :
allows to changes parameters over a number of sequences (opposed to the per-step changes).
is similar to LFO modulation at very low frequencies but timing is set by the number of sequences.
3 diff params can be changed .
for each param the number of sequences can be set.
params can be changed up/down.
params can be changed continuously or only after the sequence starts again at step 1.
3 different note offsets can be set.
Added Phase modulation to OSC1,2 & 3 (FM synthesis)
Phase mod of OSC 1 is done with OSC2
Phase mod of OSC 2 is done with output (pre gain) of the next sequencer.
Phase Mod of OSC3 is done by the Samples.
Added step frequency modulation LFO to the Samples.
Added step Detune to the Samples.
Sample Start and Width are now STEP params. (different sounds per step …).
Added Samples Auto Gain.
Added LFO waveform to Samples modulation LFO.
Added sync of OSC2 & 3 to OSC1.
Added modulation LFO waveform to OSC 2 & 3.
Added PulseWidth and Amplitude/PW modulation to OSC1.
Added Ring modulation to Pan/Out panel : OSC1-OSC2 OSC-SMPLS SEQ1-SEQ2
Added MidiLearn for almost all parameters.
Added distort function on the Track input source.
UI :
Replaced Next Sequencer button in each panel with radio buttons.
Source panel popup replaced by buttons to allow parallel sources
Midi settings (note range, channel) have their own panel (were in OSC 1)
Added OSC1 LFO bars popup.
Added Step note (pitch) recording mode : notes played are converted to pitch shift values.
Added Vol button which will show all step gain values and when clicking the step led will show a popup to set the gain.
Sequencer leds not shown any longer when sequencer row is off.
Recording samples is now controlled only by the “Sampling Armed” button. (Sample Source needed to be on previously).
Preset system updated :
real (multiple) subfolders supported
added Browser for presets and sample files
factory presets are now in a subfolder “factory”
factory synth presets are in subfolder “synth”
when iCloud is NOT used, the standalone app will copy the presets and sample files into a shared (App Group) folder to make them available for the AUv3 plugins (copy is done only when starting up the standalone app)
Bugs fixed :
Fixed working in GarageBand
Fixed popup menus in iOS15 (Vari notes, Volume popups, Copy/Paste popup)
More3.3.3
April 5, 2020
- fixed a potential crash in the delay section.
- fixed a resizing bug in the Prev/Next Preset buttons.
More3.3.2
March 30, 2020
- “Enable Ableton Link” button state is now only stored in the session (and not in the presets anymore).
- “Use 1 delay line per sequencer” setting (cpu saver) is now on by default and also stored in the presets.
- “Reset to default” (preset menu) now loads the saved default (was previously only loaded when a new plugin was instantiated)
More3.3
March 4, 2020
- Added new sampling record modes : record on Step 1, record on Next Step, record when Armed, record when Midi Note on received.
- Added “ALT” button :
when a step led is clicked, it will mute in stead of disable the step
when a parameter is changed, the same parameter will be updated in all sequencers.
- Added playhead display in sample graphs :
when Sampling is Armed, it displays the relative Step Time.
otherwise it displays the current samples being played.
- Presets are now visible and can be set in the DAW preset menu (DAW dependent).
- Added Previous Preset button (visible when sequencer is running)
- Fixed a bug in sampling when "first step" is on (samples were taken from wrong position)
More3.2
February 14, 2020
Added Ableton Link : Ableton Link is a new technology that synchronises beat, phase and tempo of Ableton Live and Link-enabled applications over a wireless or wired network.
More3.1
January 17, 2020
- added MIDI note off STOP mode.
- added MIDI All Notes off STOP mode.
- added 1/16 triplet to timing.
- added DAW BPM tracking (DAW button is now on-off in stead of push).
- Chordulator Midi Out can now follow the Arpeggiator.
- Midi Out follow input now has its own reference note (in the Midi Out panel).
- fixed bug in Midi note Start mode : starting transport also started the sequencer.
- fixed crash bug when setting Filter (bandpass) resonance to zero.
- Files app can now copy/move single sample files into the WoodStepper iCloud samples folder (previously only a folder could be copied/moved)
More3.0
December 27, 2019
Synthesizer mode :
- Each sequencer can be switched to synth mode both for VCO sources and the sample loop sources.
- The steps can then be used to have parameter automation along the bar(s) played.
- The VCO synth can be set to para-polyphonic mode (sending notes 2&3 to VCO’s 2&3), which allows a maximum of 12 voices.
- The global polyphonic mode (between the 4 sequencers/synths) allows a maximum of 4 full polyphonic voices.
- Synth mode also works when the sequencer is not running (new Advanced setting).
- New Start Sequencer mode : a midi note received in a specified range, starts the sequencer.
- Each sequencer/synth can set the range of receiving notes (allows for up to 4 split keyboard regions).
- Samples (synth and sequencer) have new play back modes : random start, random slice, random reverse.
- Samples now have a "1 shot" setting (avoids repeating when the number of samples < step time in sequencer mode or holding the key in synth mode).
- Samples can now be loaded from file (.wav, .aif, .caf, etc).
- Sample files should be in the folder "samples" in the iCloud WoodStepper folder.
- In sequencer mode an offset can be set to select a part of the file (when the file duration is larger than the step time).
- Presets now have a “Made By” and comment field.
MorePrice History of WoodStepper
Description of WoodStepper
The WoodStepper is a sequencer/synthesizer/sampler having both audio and midi out.
The audio sources can be the track audio, sampled audio (live/track recorded or from file) or the built-in VCO's.
The VCO notes can also be set by the Chordulator which finds chord notes in a live stream or recorded track.
It consists of 4 independent 8-steps sequencers which can be linked to a 16, 24 or 32 steps sequencer.
Each sequencer can independently be set to Synth mode.
So WoodStepper can be used in any combinations of sequencers, synths and looper/samplers.
Each step can also send 4 midi messages (note on, CC, …) to 2 midi channels.
The audio part for each sequencer has a pitch (down) shifter, (Moog lowpass) filter with A(D)SR envelope, saturator, amplitude A(D)SR envelope and delay line which can all be set independently per step.
The VCO notes can be set by midi input and WoodStepper has a function to limit the notes produced by VCO + pitch shifters to a specified key and interval scale.
The app can be used stand-alone (device audio input and output) or as a plugin in a DAW.
The manual can be downloaded from : http://www.woodmansimmaculatemaplesyrupstudio.be/woodstepper/WoodStepperHelp.pdf
- IOS plugin type : AUv3 effect, AUv3 instrument and stand-alone app.
- Has 4 independent 8-steps sequencers.
- Each of the 4 sequencers can be set to Synth mode, the steps can then be used to automate parameters while playing.
- Sequencers can be linked to form 16, 24, or 32 steps sequencer(s).
- Each sequencer can have a different timing.
- Steps can be disabled for non 4/4 patterns.
- Each step can send up to 4 midi messages (+ all previous notes off) on 2 midi channels
- Audio sources can be the track audio, sampled audio or 3 VCO's (per sequencer).
- Sampling (audio coming live or from the DAW track) can be armed (per sequencer) with a button or a midi in CC.
- Samples can also be loaded from file (sample files should be in the WoodStepper iCloud folder)
- Each sequencer has it’s own gain, clipping led and brick-wall limiter.
- VCO’s have the usual waveforms and can be modulated in various ways.
- Full polyphonic mode sends 4 subsequent note-ons to the 4 sequencers/synths.
- Para-polyphonic mode (per sequencer) sends notes 2&3 to the sequencer/synth VCO's 2&3, giving max 12 voices.
- Each sequencer/synth can set the range of receiving midi notes (which allows for up to 4 split keyboard regions).
- Each step has a pitch down shifter (sequencer mode only).
- Pitch shifters have a glide control.
- Pitch shifters can be set to a random value (out of a list of scales).
- Pitch values can be harmonically locked to the Just Scale or the Equally Tempered Scale.
- VCO + Pitch can be limited to a specified key + interval scale (e.g. C Major Pentatonic)
- Each step has a 4-pole Moog Lowpass filter with resonance and ASR (sequencer) or ADSR (synth) envelope.
- Steps have an additional high-pass filter and a saturation control.
- All steps have an ASR (sequencer) or ADSR (synth) amplitude envelope and a step gain.
- Each step has its own delay line with independent timing, feedback, and filtering.
- Step audio and delay can be panned independently per step.
- Sequencers can be started manually, started with the DAW transport, start after receiving a midi note or start audio gated.
- Sequencers can be stopped manually or after a number of bars have been played.
- A “Play 1 Step” button allows to finetune step settings
- An “All Steps” button allows to set the same parameter value in all steps.
- Has a global Dry-Wet, Input gain and Output gain control.
- Presets can be stored in iCloud Drive (makes them available on all your devices).
- Presets can be switched with Midi Program Changes or with the "Next Preset" button when running.
- Major controls can be set with Midi CC messages.
- Ableton Link can synchronise tempo, phase and start-stop with other Ableton Link enabled apps.
Show less
WoodStepper: FAQ
Yes, WoodStepper is iPad-friendly.
The WoodStepper app was built by Woodman's Immaculate Maple Syrup Studio.
The minimum iOS version for the WoodStepper app is 11.4.
The WoodStepper app has a consumer rating of 4.3 and gets a lot of positive feedback.
The App Category Of Woodstepper Is Music.
The current version of WoodStepper is 4.1.1.
The latest WoodStepper update was released on July 2, 2024.
The WoodStepper app originally came out on February 6, 2023.
{{ name}} doesn’t contain potentially objectionable material and is rated Woodman's Immaculate Maple Syrup Studio.
Currently, WoodStepper supports .
No, WoodStepper is not featured on Apple Arcade.
Unfortunately, users cannot make in-app purchases within WoodStepper.
Sorry, WoodStepper is not designed for integration with Apple Vision Pro.