SecuraSmart Mobile

- Two search modes on the storeroom chooser: "Exact Search" and "Smart Search". - The button in the top right corner toggles the search mode, and a toast announces the active mode.

- New version of the restock eyeball picker with a plus/minus selector. - Add All Low Stock Items -> Add All Low Stock, Now always available. - Emptiness Guage, aka Eyeball Picker, now sets defaults. - The open orders search bar will include the individual items in each order. - Eyeball picker now builds a list of 6 values on the reorder screen based on pack qty if greater than 1. - ​Refill to Max = Y : Threshold for low stock items is based on Max inventory level. - Refill to Max = N: Threshold for low stock items is based on Min inventory level. This is how it always was before.

SecuraSmart 4.8.0 is a major release that includes a number of new features and improvements, including a new rapid mode, custom reports on mobile, and enhancements to reorders and the storeroom chooser. We hope that these new features will help you to be more productive and efficient in managing your inventory. Thank you for choosing SecuraStock! - Reordered items can be approved/rejected from the app! - Our patented eyeball count system has been added to the create reorder page. - Barcode on item has been changed. - The full power of custom reports is now available in your pocket! - Fuzzy Searching was added to the storeroom chooser page.

# SecuraSmart 4.7.0 - Release Notes ## Fuzzy Inventory Search - Fuzzy searching allows for finding approximate matches rather than exact matches. - This means that even if a user mistypes a word or enters a partial search, the fuzzy search can still provide relevant results by considering similar terms or patterns. - Fuzzy searching is important for mobile devices because it helps overcome the challenges posed by the small screen size, limited input options, and potential typing errors on mobile keyboards. - Fuzzy searching has been added on the items page and the item selector page. - The search is based on a weighted search where a higher value has more influence. The following weights are applied: 1. Product ID: 3 2. Description: 2 3. Everything Else: 1 ## Transfer Items Between Storerooms - The transfer item feature allows users to easily move items between storerooms. - This feature can be found here: Dashboard -> Items -> Tools -> Transfer Items. - Upon selecting this feature, users will be prompted to enter a target storeroom, which serves as the destination for the item. - Users can scan or select items from a list and then enter the transfer quantity per item. - There are two possible outcomes when an item is sent to a storeroom: 1. If an item with the same product ID already exists, the on-hand value will increase based on the entered quantity. 2. If the item does not already exist, it will be created with the on-hand value set to the entered quantity. ## Cycle Count / Restock - The restock feature enables the user to easily manage the transition of items from the backstock to the forward stock. - On the "Pick Your Own" Cycle Count page, you will be presented with a modal that prompts the user to select either "Cycle Count" or "Restock". This choice can be changed later using the "Type" input at the top of the page. - If the user selects "Cycle Count", things will operate as normal. The items' on-hand value will be set to the quantity entered. - If the user selects "Restock", there will be two inputs on the items' component instead of one. The two inputs are "Restock Amount" and "Quantity After Restock". Please refer to the other comment for the formula that will be used to set the on-hand value.

# SecuraSmart 4.7.0 - Release Notes ## Fuzzy Inventory Search - Fuzzy searching allows for finding approximate matches rather than exact matches. - This means that even if a user mistypes a word or enters a partial search, the fuzzy search can still provide relevant results by considering similar terms or patterns. - Fuzzy searching is important for mobile devices because it helps overcome the challenges posed by the small screen size, limited input options, and potential typing errors on mobile keyboards. - Fuzzy searching has been added on the items page and the item selector page. - The search is based on a weighted search where a higher value has more influence. The following weights are applied: 1. Product ID: 3 2. Description: 2 3. Everything Else: 1 ## Transfer Items Between Storerooms - The transfer item feature allows users to easily move items between storerooms. - This feature can be found here: Dashboard -> Items -> Tools -> Transfer Items. - Upon selecting this feature, users will be prompted to enter a target storeroom, which serves as the destination for the item. - Users can scan or select items from a list and then enter the transfer quantity per item. - There are two possible outcomes when an item is sent to a storeroom: 1. If an item with the same product ID already exists, the on-hand value will increase based on the entered quantity. 2. If the item does not already exist, it will be created with the on-hand value set to the entered quantity. ## Cycle Count / Restock - The restock feature enables the user to easily manage the transition of items from the backstock to the forward stock. - On the "Pick Your Own" Cycle Count page, you will be presented with a modal that prompts the user to select either "Cycle Count" or "Restock". This choice can be changed later using the "Type" input at the top of the page. - If the user selects "Cycle Count", things will operate as normal. The items' on-hand value will be set to the quantity entered. - If the user selects "Restock", there will be two inputs on the items' component instead of one. The two inputs are "Restock Amount" and "Quantity After Restock". Please refer to the other comment for the formula that will be used to set the on-hand value.

- Barcode Scanner Tooltips: Tooltips can be accessed via a "?" with a circle around it! - Settings: New Settings page available via the menu. - Support Page Overhaul: A new contact form has been added because we wanted to make things as seamless and easy as possible. - A searchable FAQ section has been added to the support page. We will continue to build and improve the FAQs to best help users in the field who need immediate answers to their questions. - The date picker now uses a calendar view instead of a date wheel.

The most advanced app in industrial distribution brings you a host of new features in 4.5: == QR Codes == - Dashboard: Scanning a machine QR code will allow the user to switch to that machine in the app. - Storeroom Chooser: a machine QR code will allow the user to switch to that machine in the app. - Login Page: if in single storeroom mode, machine QR codes will auto-set the serial number. - Login Page Settings: machine QR codes will auto-set the serial number via the barcode button next to the serial input. == Dynamic Jobs == - On the transaction page, when selecting a job, there is now an option to add. == Custom Field Support == - Transactions: Job requirements will be toggleable via storeroom settings. - Nonstock Request: now has full custom fields support. - Inventory Request: now has full custom fields support. - Reorders: now has full custom field support. == Nonstock Request == - UPC lookup is now available for non-stock requests. - Add to inventory is now available for existing Nonstock Requests. - Inventory requests and nonstock requests have easier navigation. == Inventory == - The search bar field and filter is now persistent and doesn’t reset when leaving or refreshing the page. - The inventory editor now makes better use of default values from the CUI. - When accessing the item details page quickly after changing storerooms, it would hang, and the user would need to leave that page and return. This is now fixed. == Recent Storeroom Filter == - The recent storerooms filter can be found on the “choose storeroom” page adjacent to the search bar. - When you connect to a storeroom, it will add it to the recent storeroom filter. == UPC Lookup == -Images and approx cost added. == Storeroom Chooser == - The button adjacent to the search bar allows filtering by recent or all storerooms.

The most advanced app in industrial distribution brings you a host of new features in 4.5.0: == QR Codes == - Dashboard: Scanning a machine QR code will allow the user to switch to that machine in the app. - Storeroom Chooser: a machine QR code will allow the user to switch to that machine in the app. - Login Page: if in single storeroom mode, machine QR codes will auto-set the serial number. - Login Page Settings: machine QR codes will auto-set the serial number via the barcode button next to the serial input. == Dynamic Jobs == - On the transaction page, when selecting a job, there is now an option to add. == Custom Field Support == - Transactions: Job requirements will be toggleable via storeroom settings. - Nonstock Request: now has full custom fields support. - Inventory Request: now has full custom fields support. - Reorders: now has full custom field support. == Nonstock Request == - UPC lookup is now available for non-stock requests. - Add to inventory is now available for existing Nonstock Requests. - Inventory requests and nonstock requests have easier navigation. == Inventory == - The search bar field and filter is now persistent and doesn’t reset when leaving or refreshing the page. - The inventory editor now makes better use of default values from the CUI. - When accessing the item details page quickly after changing storerooms, it would hang, and the user would need to leave that page and return. This is now fixed. == Recent Storeroom Filter == - The recent storerooms filter can be found on the “choose storeroom” page adjacent to the search bar. - When you connect to a storeroom, it will add it to the recent storeroom filter. == UPC Lookup == -Images and approx cost added. == Storeroom Chooser == - The button adjacent to the search bar allows filtering by recent or all storerooms.

- Tabs at the bottom of the page for easier navigation. - Inventory Page user interface improvements. - Dashboard information pages are interactable for more information. - Storeroom Settings editor added - Rapid Scanning modes were added to the inventory tools. - UPC Lookup for easy item identification. - Added CMMS interface.

- UPC Lookup added for easy item identification - Speech to text service added - Crib crawl for easy organization of storerooms - Users can now access and manage one storeroom while offline - Improved interfaces when selecting items to be more initiative - Added advanced item tracking details page - Added more control over inventoried items - Added CMMS interface - Added kit interface