2.8.49
September 23, 2024
Optimizations / New Features: ◦ New Feature: Configuration of empty groups ▪ Empty groups can now be configured in advance. This allows the project to be set up with all groups and their respective settings beforehand. Later, individual products can be added to the respective groups. ◦ New Feature: Mass modification ▪ By long pressing and holding, multiple groups within a network can now be selected and edited simultaneously. The following parameters can be adjusted: • Motion Sensor (Sensitivity) • Brightness Value • Main Light Dimming Level & Run-on Time • Base Light Dimming Level & Run-on Time ◦ New Feature: Default templates ▪ In the network settings, the default profiles "Fully-Automatic", "Semi-Automatic", "Nightmatic", and "Switch Mode" can now be adjusted for the entire network. Every product and group added to the network after the adjustment of the default templates will now be set up with the new values. ◦ New Feature: Network sensor ▪ Light sensors of individual products can now be shared across the entire network and used across groups. ◦ New Feature: Move networks ▪ Networks can now be moved from one project to another. The user must be an "Administrator" in both projects. ◦ New Feature: Profile call via pushbutton ▪ When assigning button functions, profiles can now also be saved. ◦ New Feature: Save dimming value fixed/dynamic ▪ This feature determines whether a manually set dimming value via button should subsequently be permanently saved as the new setpoint or whether the product should revert to the old setpoint when switched on. ◦ Optimization: Networks can now be saved locally at any time, even if an upload to the cloud is currently not possible.
More2.8.35
June 26, 2024
Optimizations / New Features: ◦ New Feature: Configuration of empty groups ▪ Empty groups can now be configured in advance. This allows the project to be set up with all groups and their respective settings beforehand. Later, individual products can be added to the respective groups. ◦ New Feature: Mass modification ▪ By long pressing and holding, multiple groups within a network can now be selected and edited simultaneously. The following parameters can be adjusted: • Motion Sensor (Sensitivity) • Brightness Value • Main Light Dimming Level & Run-on Time • Base Light Dimming Level & Run-on Time ◦ New Feature: Default templates ▪ In the network settings, the default profiles "Fully-Automatic", "Semi-Automatic", "Nightmatic", and "Switch Mode" can now be adjusted for the entire network. Every product and group added to the network after the adjustment of the default templates will now be set up with the new values. ◦ New Feature: Network sensor ▪ Light sensors of individual products can now be shared across the entire network and used across groups. ◦ New Feature: Move networks ▪ Networks can now be moved from one project to another. The user must be an "Administrator" in both projects. ◦ New Feature: Profile call via pushbutton ▪ When assigning button functions, profiles can now also be saved. ◦ New Feature: Save dimming value fixed/dynamic ▪ This feature determines whether a manually set dimming value via button should subsequently be permanently saved as the new setpoint or whether the product should revert to the old setpoint when switched on. ◦ Optimization: Networks can now be saved locally at any time, even if an upload to the cloud is currently not possible.
More2.8.34
June 20, 2024
Optimizations / New Features: ◦ New Feature: Configuration of empty groups ▪ Empty groups can now be configured in advance. This allows the project to be set up with all groups and their respective settings beforehand. Later, individual products can be added to the respective groups. ◦ New Feature: Mass modification ▪ By long pressing and holding, multiple groups within a network can now be selected and edited simultaneously. The following parameters can be adjusted: • Motion Sensor (Sensitivity) • Brightness Value • Main Light Dimming Level & Run-on Time • Base Light Dimming Level & Run-on Time ◦ New Feature: Default templates ▪ In the network settings, the default profiles "Fully-Automatic", "Semi-Automatic", "Nightmatic", and "Switch Mode" can now be adjusted for the entire network. Every product and group added to the network after the adjustment of the default templates will now be set up with the new values. ◦ New Feature: Network sensor ▪ Light sensors of individual products can now be shared across the entire network and used across groups. ◦ New Feature: Move networks ▪ Networks can now be moved from one project to another. The user must be an "Administrator" in both projects. ◦ New Feature: Profile call via pushbutton ▪ When assigning button functions, profiles can now also be saved. ◦ New Feature: Save dimming value fixed/dynamic ▪ This feature determines whether a manually set dimming value via button should subsequently be permanently saved as the new setpoint or whether the product should revert to the old setpoint when switched on. ◦ Optimization: Networks can now be saved locally at any time, even if an upload to the cloud is currently not possible.
More2.8.33
June 17, 2024
Optimizations / New Features: ◦ New Feature: Configuration of empty groups ▪ Empty groups can now be configured in advance. This allows the project to be set up with all groups and their respective settings beforehand. Later, individual products can be added to the respective groups. ◦ New Feature: Mass modification ▪ By long pressing and holding, multiple groups within a network can now be selected and edited simultaneously. The following parameters can be adjusted: • Motion Sensor (Sensitivity) • Brightness Value • Main Light Dimming Level & Run-on Time • Base Light Dimming Level & Run-on Time ◦ New Feature: Default templates ▪ In the network settings, the default profiles "Fully-Automatic", "Semi-Automatic", "Nightmatic", and "Switch Mode" can now be adjusted for the entire network. Every product and group added to the network after the adjustment of the default templates will now be set up with the new values. ◦ New Feature: Network sensor ▪ Light sensors of individual products can now be shared across the entire network and used across groups. ◦ New Feature: Move networks ▪ Networks can now be moved from one project to another. The user must be an "Administrator" in both projects. ◦ New Feature: Profile call via pushbutton ▪ When assigning button functions, profiles can now also be saved. ◦ New Feature: Save dimming value fixed/dynamic ▪ This feature determines whether a manually set dimming value via button should subsequently be permanently saved as the new setpoint or whether the product should revert to the old setpoint when switched on. ◦ Optimization: Networks can now be saved locally at any time, even if an upload to the cloud is currently not possible.
More2.8.32
June 13, 2024
Optimizations / New Features: ◦ New Feature: Configuration of empty groups ▪ Empty groups can now be configured in advance. This allows the project to be set up with all groups and their respective settings beforehand. Later, individual products can be added to the respective groups. ◦ New Feature: Mass modification ▪ By long pressing and holding, multiple groups within a network can now be selected and edited simultaneously. The following parameters can be adjusted: • Motion Sensor (Sensitivity) • Brightness Value • Main Light Dimming Level & Run-on Time • Base Light Dimming Level & Run-on Time ◦ New Feature: Default templates ▪ In the network settings, the default profiles "Fully-Automatic", "Semi-Automatic", "Nightmatic", and "Switch Mode" can now be adjusted for the entire network. Every product and group added to the network after the adjustment of the default templates will now be set up with the new values. ◦ New Feature: Network sensor ▪ Light sensors of individual products can now be shared across the entire network and used across groups. ◦ New Feature: Move networks ▪ Networks can now be moved from one project to another. The user must be an "Administrator" in both projects. ◦ New Feature: Profile call via pushbutton ▪ When assigning button functions, profiles can now also be saved. ◦ New Feature: Save dimming value fixed/dynamic ▪ This feature determines whether a manually set dimming value via button should subsequently be permanently saved as the new setpoint or whether the product should revert to the old setpoint when switched on. ◦ Optimization: Networks can now be saved locally at any time, even if an upload to the cloud is currently not possible.
More2.8.31
June 13, 2024
Optimizations / New Features: ◦ New Feature: Configuration of empty groups ▪ Empty groups can now be configured in advance. This allows the project to be set up with all groups and their respective settings beforehand. Later, individual products can be added to the respective groups. ◦ New Feature: Mass modification ▪ By long pressing and holding, multiple groups within a network can now be selected and edited simultaneously. The following parameters can be adjusted: • Motion Sensor (Sensitivity) • Brightness Value • Main Light Dimming Level & Run-on Time • Base Light Dimming Level & Run-on Time ◦ New Feature: Default templates ▪ In the network settings, the default profiles "Fully-Automatic", "Semi-Automatic", "Nightmatic", and "Switch Mode" can now be adjusted for the entire network. Every product and group added to the network after the adjustment of the default templates will now be set up with the new values. ◦ New Feature: Network sensor ▪ Light sensors of individual products can now be shared across the entire network and used across groups. ◦ New Feature: Move networks ▪ Networks can now be moved from one project to another. The user must be an "Administrator" in both projects. ◦ New Feature: Profile call via pushbutton ▪ When assigning button functions, profiles can now also be saved. ◦ New Feature: Save dimming value fixed/dynamic ▪ This feature determines whether a manually set dimming value via button should subsequently be permanently saved as the new setpoint or whether the product should revert to the old setpoint when switched on. ◦ Optimization: Networks can now be saved locally at any time, even if an upload to the cloud is currently not possible.
More2.7.65
February 5, 2024
Bugfixes: - Due to a bug, times were not saved in the Nightmatic profile (e.g. for night saving mode). This bug has now been fixed. - The "Sensor-Nightmatic" operating mode sometimes did not work as intended. Bugs should no longer occur in this context. - General layout optimizations in the tile overview.
More2.7.59
November 23, 2023
The instructions and live tutorial for adding the new STEINEL wireless pushbuttons have been adjusted to explain the process more clearly and simply.
2.7.55
November 2, 2023
The instructions and live tutorial for adding the new STEINEL wireless pushbuttons have been adjusted to explain the process more clearly and simply.
2.7.54
October 23, 2023
The instructions and live tutorial for adding the new STEINEL wireless pushbuttons have been adjusted to explain the process more clearly and simply.
Yes, Steinel Connect can be used on iPad devices.
The Steinel Connect app was made by Steinel GmbH.
Steinel Connect currently supports iOS 15.0 or later.
Currently, Steinel Connect has a user rating of 1.
The Steinel Connect App Relates To The Utilities Genre.
2.8.49 is the newly released Steinel Connect version.
October 2, 2024 is the exact date of the latest Steinel Connect update.
The Steinel Connect app became available to the public on February 6, 2023.
Steinel GmbH: The Steinel Connect app is child-friendly.
Steinel Connect can be used in Danish, Dutch, English and 6 more.
Unfortunately, Steinel Connect is not on Apple Arcade.
No, Steinel Connect does not allow for in-app purchases.
Sorry, Steinel Connect is not specifically engineered for compatibility with Apple Vision Pro.
No, ads are not featured prominently in Steinel Connect.