Not a Dremel supported app
Dose not connect to a Dremel printer
Real Time Video !!!
Great application, I like the real time video. If possible in a future update I would like to see the following.
While zooming, option to move up down left right.
When phone is on the side, have the video flip to the side full screen or option for full screen.
While zooming, option to move up down left right.
When phone is on the side, have the video flip to the side full screen or option for full screen.
Local only
Although the app works great if your on the same LAN as the printers, this is the ONLY time it works, which makes it useless compared to Dremel’s own printcloud website. I want my money back.
Dremel 3D printing
J’espère que j’ai pas payé $12.00 just pour ca.
La caméra fonctionne mais le temps de réalisation estimer sur l’application est = 1h30 mais en réalité sur l’imprimante il reste 5h45 .
Pourquoi en ne peut pas mettre en pause, seulement annuler 🤔🤔
Sa ne me dérange pas de payer mais donne moi quelques chose qui fonctionne.
Indication porte ouverte ou fermée 👍.
La température de la buse 👍.
La température du plateau 👍.
Type de filament 👍.
J’espère que cela va être corrigé.
La caméra fonctionne mais le temps de réalisation estimer sur l’application est = 1h30 mais en réalité sur l’imprimante il reste 5h45 .
Pourquoi en ne peut pas mettre en pause, seulement annuler 🤔🤔
Sa ne me dérange pas de payer mais donne moi quelques chose qui fonctionne.
Indication porte ouverte ou fermée 👍.
La température de la buse 👍.
La température du plateau 👍.
Type de filament 👍.
J’espère que cela va être corrigé.
Show more
App nimmt Keine Verbindung zum Drucker auf
Weder die Informationen, wie auf Bild 2 werden angezeigt.
Reagiert auch nicht auf „ Anklicken“
Keine Verbindung zur Cam des Druckers
So macht das wenig bis gar keinen Sinn 😢
Reagiert auch nicht auf „ Anklicken“
Keine Verbindung zur Cam des Druckers
So macht das wenig bis gar keinen Sinn 😢
Ganz nett aber nicht Up to Date
Ansicht eine schöne Sache wenn man nicht über den Webbrowser gehen will. Wenn man für eine solche App Geld verlangt und auch nicht zu wenig, dann sollte man auch etwas App Pflege betreiben.
1. Kein Querformat Modus 🤷🏻♂️
2. Keine Einzelansicht des jeweiligen Druckers.🧐
Es werden immer 3 Felder angezeigt.🤷🏻♂️
3. Anpassungen an IOS 15 🙏🏻
1. Kein Querformat Modus 🤷🏻♂️
2. Keine Einzelansicht des jeweiligen Druckers.🧐
Es werden immer 3 Felder angezeigt.🤷🏻♂️
3. Anpassungen an IOS 15 🙏🏻
Show more
Would like remote view
App is great on my home network wifi but does not work outside this.......this would be 5 star otherwise
App works great
The app connects and works great, a couple features that would be nice is the ability to view 1 printer in full screen instead of having all 3 on the same screen and 2 of them blank cause I only have one printer and not needing 3 screens, also when deleting ip addresses from the other two the statuses still remains as if it’s still connected. A way to record the time lapse of the printing process would be a nice add on as well. Other than that I would say it’s a must have for a 3d printer.
Show more
Ganz okay
Eig eine nette Idee das man mit der Kamera den Druck beobachten kann und stoppen im Notfall aber das war’s ja auch schon und wenn man keine feste Öffentliche ip hat kann man es nur von zuhause aus also da ist noch viel Luft nach oben so wie die ganzen Einstellung vllt auf die App zu bringen und für den Preis sind es einfach zu wenig Einstellungen. Auch das Problem mit ipv4 das man es hinbekommt mit ipv6 über eine cloud würde sowas gut gehen bei dem Preis müsste es drin sein.
Show more
Works great!
Works perfect with my iPhone XS Max and Dremel 3D45! Matter of fact I’m using it right now! Thanks so much for adding the ability to swap the temperature between C and F! 👍👍
Funktioniert!
Die Steuerung funktioniert wie versprochen, es ist zwar nicht alles auf Deutsch, aber man versteht sofort worum es geht.
Für Fußfaule 😎
Endlich muss ich nicht mehr in den Keller laufen, um den Druck zu überwachen. Cool.
Tolle App
Es funktioniert einwandfrei. Englischkenntnisse sind nicht notwändig, man gibt die IP ein und sieht life, was der Drucker macht.
Super, danke!
Super, danke!
Innovativ
Nach so einer App habe ich lange gesucht. Hat mir bei meinen Hardwareprojekten extrem weitergeholfen und kann ich auf Grund dessen nur weiterempfehlen.
Tip Top👍🏻
Super App 👌🏻
Geniale Idee 💡
Perfekt um den Druckvorgang zu kontrollieren 😊
Geniale Idee 💡
Perfekt um den Druckvorgang zu kontrollieren 😊
genauso habe ich es mir vorgestellt.
ich brenne auf die neuen Apps von eXoda. Super Tools, ausgereift und einfach tuffig und super
Very handy app
You can get access via web browser but having it on an app is much handier
Garbage
Don’t buy it. Give me my money back
Crashes
Cannot even open the app. Keeps crashing. Done all possible steps to resolve. Same thing. Will be trying to get my money back.
Gute Idee
Leider funktioniert es nicht mit der iP Adresse zudem ist die Sprache bei den Bildern Auf deutsch und in der App gibt es nur englisch
