iFSC - Field Setup Controller

Utilities

1 review

⭐️3 / 5

Rating

🙌1

Ratings

📼3 scs

Content

📦w/o updates

Updates frequency

🗣❌ unsupported

Your locale

Versions
Price History
Description
FAQ

All Versions of iFSC

2.23

December 10, 2018

Add Sensor Model REF TEK Colt in Channel Parameters Configuration screen.

2.22

June 11, 2018

Fixes to crashes that surfaced when run in iOS 11.3.

2.21

September 30, 2015

Fix Aux Control->Off-set->Calc->Store operation lock up on older iOS devices.

2.20

April 21, 2015

* Removed 16 bit option for Data Format in Datastream configuration. * When editing configuration and mode is 130S, include 0.1, 1, and 5 SPS as Sample Rate options in Datastream. * Minor display bug fixes with iOS 7 and above.

2.10

June 18, 2014

* Match nomenclature, terminologies, specs, and capability changes on the latest DAS130 firmware and hardware. - Use RTP1/RTP2 in place of ENet/Serial labels. - Limit Parameter configuration to 4 Datastreams. - Removed 25 SPS from Datastream Sample Rate options. - Removed options for Sample Rates 0.1, 1, and 5 SPS if in 130REN mode. - 130REN mode supports 1 to 6 channels and added Compressed (CF) data format in the Datastream. - Add RT608 D board as Damped/Undamped Test capable unit. - Revised limits for Calibration Duration and Step Signal parameters. * Bug fixes

2.0

February 26, 2014

* Support communication via WiFi-Serial Adapter (hardware available from Trimble) on DAS 130 Serial Port. * Added support for DAS 130Q/QH Transmitter & Calibration Parameters Configuration.

1.41

June 28, 2013

Bug fix to allow support of standard Sensor Tests for DAS130 with the new 0527 Rev D Sensor Control board.

1.40

March 28, 2013

*Support Sensor Damped/Undamped test. [Note: Requires compatible DAS130 hardware and firmware.] *Support DAS130 Rapid Event Notification (REN) mode. [Note: Requires compatible DAS130 hardware and/or firmware.] - screens and display customized for REN configuration and parameters - Dual RTP Network DAS130 configuration - Added Difference (DIF) Trigger Type as Datastream parameter - Real Time Monitor option to display sensor reading value in numeric format * Bug fixes. Memory leak fixes.

1.30

May 29, 2012

* Support Sensor Lock/UnLock operations when used with compatible DAS 130 firmware and hardware. * Mode 130S for Configuration file edit screens to support reassignment of Datastream Sample Rate 50 samples/sec to Group 2. Requires compatible DAS 130 firmware. * Fixed memory leak in Data Stream Level Trigger Parameter screen. * Real time data monitor display fixes and improvements.

1.20

January 18, 2012

-Fix Mode menu selection screen crash on iOS 5 devices. -Support new Sensor Auto Re-center parameters. -Support real-time Sensor data display. Note: Requires DAS 130 firmware version 340 for the new features added.

Description of iFSC

iFSC (Field Setup Controller) is a Command/Control app for the REF TEK 130 DAS Seismic Recorder via the Serial Port.. iFSC is used to edit and program the acquisition parameters of the DAS. It also provides State-of-Health monitoring with an extensive set of Status commands. State-of-Health monitoring includes acquisition status, RAM and disk usage, GPS status, main and backup battery voltages, time, and temperature. Additional commands allow setting up network connections and checking network status. Data monitoring without stopping acquisition is also available. The Command/Control functionality of this app requires the iFSC cable or WiFi Serial Adapter which are available from the manufacturer of the REF TEK 130 DAS Seismic Recorder.

Show less