Live Reviews:
WaveCloud

WaveCloud

Granular Synthesis

⭐️4.9 / 5
Rating
🙌15
Ratings
📼7 scs
Content
📉--33.36%
Price change
📦~ in 1 week
Updates frequency
🗣❌ unsupported
Your locale
Subscribe to price changes:

All Versions of WaveCloud

1.04

January 23, 2024

v1.04 B65 - Release Candidate Fixes an issue where starting a new recording immediately after launch did not make the editor visible. Fixed an issue where Grain Wrap was not being saved with the preset/session. When changing the exposed AU Position or grain position knob, it now updates all playing notes/orbit positions. Grain size can now be adjusted in 0.1K steps. Number of Grains per second can now be adjusted in 0.1s steps. The Setting option Append Recording has now become Recording Mode (OVERWRITE, APPEND and LOOP). You can now specify a record length as seconds or beats. The MONITOR button now needs to be engaged to hear any audio passing through, where previously it would allow passthrough during recording. Append Recordings, Record Mode, Max Record Length, Monitor and Monitor Mix are now saved with the session / preset. Exposed the Hold option as an AU parameter. The input Monitor has been made an AU parameter. Monitor Mix is exported as an AU Parameter. Added a new Live Mix Options window which can be accessed from the Open Window submenu or from long pressing the Record button. The Live Mix Options has a Threshold and Monitor Mix knob to mix monitor vs WaveGlide output. The new LOOP recording mode can be used to create some basic granular effects. Use in conjunction with Max Record Length and the Live Loop Options. NOTE: If Recording Mode is set to LOOP, it will work as follows:- 1) If Record Start is set to IMMEDIATELY, it will continuosly capture a loop of set length. 2) If Record Start is set to AUDIO DETECT, it will capture a loop then enter ARMED state, waitiing to be triggered again. Updated the manual and added links to the new videos.
More

1.03

January 10, 2024

v1.03 B58 Added support for 3 simultanious WaveGlides. Added a per node pitch shift option to each WaveGlide. Added a per node volume to the WaveGlide. Added AU parameters to individually turn on each of the 3 WaveGlides via AU params (rather than active WaveGlide). Added the new pitch abd volume setting to the Randomize WaveGlide window. Added an AU parameter to seek to the percentage position within a sample. Added an AU paramter to change the random tuning. Added AU parameters to control VCF1 & VCF2 cutoff and resonance. Added an input Monitor button to the Edit Options toolbar. Added an AU parameter to toggle remote recording with the interface closed. You can now choose to Append Recordings and set the Max Record Length by long pressing the Record button. Added the ability to set a maximum global recording length. Added the ability to control the play position using CC20. Added a file lock button to the right of the grain file selection. When enabled the the file will not be replaced when loading other presets. Improved the speed that presets are loading. Setting FULL screen mode in one instance now updates all instances. Fixed an error with running multpile instances under Loopy Pro. Fixed an issue which caused user Favourites not to stick between versions. Fixed an issue with legato due to none reseting variable on before loading preset. Fixed an issue where when running as an AUv3 the version in the about box was wrong. Fixed an issue where the total flight time is not updated when deleting all events. Updated Manual.
More

1.02

December 19, 2023

v1.02 B43 Fixed an issue where the half cell shading extends too far on the play and record buttons. Fixed an issue where the HOLD and SHIFT buttons were not using the correct custom colours. The MPE keyboard and lock are now available to iPhone users. Added the ability to turn off the 3D half-cell shading button effect for clarity of button text (long press MENU). Minor tweaks to knob sensitivities. v1.01 Added the ability to drag WaveGlide markers within the editor window. Added SHIFT and HOLD buttons on the right of the TABBAR so it's there on all pages. Hold SHIFT while adjusting knobs and selectors to get fine adjust mode. Hold SHIFT when setting WaveGlide Hold Time, Transition Time, Transition Mode or Advance Mode to set ALL nodes to the same setting. Added smoothing to the Filter Env Amount knobs. Added a randomize dialog for the WaveGlide. You can now have up to 12 nodes in a WaveGlide. Long pressing the Delete button on the WaveGlide screen now clears the nodes. Added a new 'Jump' mode to WaveGlide which jumps to the destination with no glide or fade. Added an Advance option to WaveGlide that allows RANDOM jumps between nodes rather than simply moving to the NEXT node. Added an option to the Settings called 'Force Full Screen' which defaults to ON. When 'Force Full Screen' is OFF, shrinking the interface can split the view into two scrollable areas. This is also great for iPhone users. Added new help manual with links to MasterClass #2 video. Fixed an issue where quick repeat tapping of the Poly could cause the menu to appear empty. Fixed an issue with deleting entries in the WaveGlide chain. Fixed an issue with the MPE keyboard where we weren't getting full polyphony. Fixed an issue which could cause notes to stick if keys where pressed while changing patch. Fixed a spelling in the limiter setup menu. WaveCloud now prompts to run in standalone mode to setup the presets when first installed. This could cause issues if the presets were not setup correctly.
More

1.01

December 17, 2023

v1.01 B40 - Release Candidate Added the ability to drag WaveGlide markers within the editor window. Added SHIFT and HOLD buttons on the right of the TABBAR so it's there on all pages. Hold SHIFT while adjusting knobs and selectors to get fine adjust mode. Hold SHIFT when setting WaveGlide Hold Time, Transition Time, Transition Mode or Advance Mode to set ALL nodes to the same setting. Added smoothing to the Filter Env Amount knobs. Added a randomize dialog for the WaveGlide. You can now have up to 12 nodes in a WaveGlide. Long pressing the Delete button on the WaveGlide screen now clears the nodes. Added a new 'Jump' mode to WaveGlide which jumps to the destination with no glide or fade. Added an Advance option to WaveGlide that allows RANDOM jumps between nodes rather than simply moving to the NEXT node. Added an option to the Settings called 'Force Full Screen' which defaults to ON. When 'Force Full Screen' is OFF, shrinking the interface can split the view into two scrollable areas. This is also great for iPhone users. Fixed an issue where quick repeat tapping of the Poly could cause the menu to appear empty. Fixed an issue with deleting entries in the WaveGlide chain. Fixed an issue with the MPE keyboard where we weren't getting full polyphony. Fixed an issue which could cause notes to stick if keys where pressed while changing patch. Fixed a spelling in the limiter setup menu. WaveCloud now prompts to run in standalone mode to setup the presets when first installed. This could cause issues if the presets were not setup correctly.
More

1.0

December 11, 2023

Price History of WaveCloud

Description of WaveCloud

WaveCloud is an innovative granular synthesizer that offers powerful tools for manipulating and playing sounds. Granular synthesis divides an audio sample into tiny fragments, called grains, each typically a few milliseconds in length. These grains are then manipulated independently in terms of pitch, duration, position in time, and amplitude. Unlike traditional synthesis, the capability to manipulate tiny grains of audio offers enormous precision of sound control, transformation, and compositional possibilities. WaveCloud offers a wide range of tools for experimentation – oscillator, LFOs, filters, envelopes, routing matrix, innovative WaveGlide and Orbit modules for grain movement, effects, MPE support, extensive waveform editing, customizable themes, MIDI CC control, aftertouch, audio pool manager, and 200+ presets to get you started. Granular synthesis is extremely versatile and can produce a vast range of sounds and textures, from subtle, atmospheric sounds to complex, dynamic ones. WaveCloud offers dozens of parameters, enabling you to sculpt the sound grains in any way you wish – textural pads and atmospheres, time-stretched effects, glitchy and stutter effects, vocal and instrumental manipulations, granular synthesis percussive sounds, experimental effects, as well as microtonal and harmonic soundscapes. WaveCloud features a drag and drop system for importing and exporting of audio files and presets. It has its own built-in Preset and Audio Managers to help keep everything in order. WaveCloud even features a fully-fledged zoomable audio editor along with a suite of tools to crop, fade, cut, copy, paste, and normalise your samples. We include a morphing 3-state Oscillator to support the granular engine. The granular engine allows up to 50 grains per second per note, with grain lengths up to a second in length. Grains can be sculpted with our morphing envelope generator, manipulated with our LFOs, FEGs and VCFs, and passed through lots of randomisation to keep things continually evolving. WaveCloud also features two unique features for adding movement to audio grains. Orbit mode allows you to play sweeping patterns tied to the physical host tempo of your DAW, and WaveGlide is a sequencer with glides and fades from one location to another. To top it all off, we include 7 built-in effects, delay, reverb, chorus, overdrive, phaser, resonator, and 8-band EQ. The resonator controls per-note feedback and dispersion for amazing MPE effects. WaveCloud is not only a deep and powerful granular synth but also a fun way to create many incredible sounds. Features • Over 200 presets • 3-state morphing oscillator (sine, square, saw) • Morphing grain shapes • 2 low-frequency morphing oscillators • 4 multistep envelope generators • 2 visual filters (series and parallel modes) • Per-channel feedback resonators with dispersion • MPE Support (per-channel pitch bend, aftertouch, and CC74) • Orbit mode • WaveGlide sequencing • Fully Featured Mod-Matrix • Direct record and playback of samples • Built-in sample editor with editing tools • 7 built-in effects • Built-in Audio Manager with drag and drop support • Preset Manager with easy import/export, drag and drop • Colour scheme editor
Show less

WaveCloud: FAQ

Can WaveCloud be used on iPad devices?

Yes, there is an iPad version available for WaveCloud.
The WaveCloud app was developed by Limelight Software.
Currently, WaveCloud supports iOS 12.0 or later.
4.9 out of 5 is the fantastic rating that WaveCloud has received from users.
The App Category Of Wavecloud Is Music.
1.04 is the newly released WaveCloud version.
WaveCloud updated on July 5, 2024.
The specific date when the app came out was July 2, 2024.
No objectionable content, suitable for young children.
Currently, WaveCloud supports American English.
Sorry, WaveCloud is not part of Apple Arcade.
Sorry, there are no in-app purchases available in WaveCloud.
Sorry, WaveCloud is not designed for integration with Apple Vision Pro.

ASO: Keywords of WaveCloud

Screenshots of WaveCloud

iphone
ipad

More Applications by Limelight Software

Reviews of WaveCloud

  • Better now! Thank you.

    This synth is nice sounding! The developer is quick, responsive, and has worked out a UI solution that will help with the app sizing…and it also seems like the knobs work better? Kool!

    There were some other improvements as well, making this synth even more desirable to use.

    Developer Response

    I’ve added a new option to Settings called Force Full Screen. If you turn this off the interface will be more accessible on the iPhone allowing scrolling between the two parts of the interface. I really wasn’t sure if to allow this app to run on iPhone since it really does need the screen space, but I was hoping people would except the limitation and be thankful it was at least supported. Maybe in future I will have to reconsider adding support if it harms my review status.
  • Unresponsive UI and auv3 crash

    I don’t know why I keep giving 4Pockets apps a chance. Every time it’s disappointing. The UI is unresponsive and cluttered. The knobs don’t always move smoothly or as expected. You should go look at Bleass apps for how to create a smooth UI experience.

    Loading it in AUM crashed once after installing. Running iOS 16.6.1. iPad
    Pro 2018.

    Developer Response

    Sorry to hear you are having issues, but these issues can be easily resolved. In most cases the knob issue is because people are trying to move the knobs in a circular motion, which is incorrect. In the Settings menu there are options to control how the knobs work (vertical, horizontal or both axis) so you simply TAP and drag either horizontally or vertically. The next version also has a SHIFT button for fine tuning parameters using the knobs. NOTE: You always need to open AUv3's in standalone mode first to ensure the app and presets are setiup correctly, after that it should function fine. This is true of all AUv3 apps that have upgradable content.