This app will help you configure the carb of your 2-strokes Yamaha YZ bike (PW 50, PW 80, YZ 65, YZ 80, YZ 85, YZ 125, YZ 125 X, YZ 250, YZ 250 X) to improve its performance. Using temperature, altitude, humidity, atmospheric pressure and oil-mix ratio, the app will show you a recommendation about jetting to your specific bike, so it can be useful to get a spot-on configuration and adapt it to the weather changes.
In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS and internet connection, in this case, the user has to give the altitude and weather data.
The application is made up of four tabs that are described next:
- Results: in this tab, the recommended main jet, needle type and clip position, pilot jet and air screw position are shown. These data are calculated depending on the weather conditions and the engine configuration introduced in the next tabs. In addition, this tab lets to make a fine tuning adjustment to adapt to a concrete engine.
- Weather: you can set the values for current temperature, altitude, pressure and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).
- Engine: you must set in this screen the information about the engine, that is, the year, region, model and carburetor, and the oil mix ratio that you're using.
- GPS: this tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
The application can manage different measure units: meters and feet for altitude, ºC and ºF for temperatures, mb, hPa, inHg, mmHg for pressure.
Yamaha YZ models that are included:
- PW50 from 1995 to 2024.
- PW80 from 1995 to 2024.
- YZ65 from 2018 to 2024.
- YZ80 / YZ85 from 1995 to 2024.
- YZ125 from 1995 to 2024.
- YZ125X from 2016 to 2024.
- YZ250 from 1995 to 2024.
- YZ250X from 2016 to 2024.
Show less
What's New in Jetting for Yamaha YZ 2T bikes
2.3
October 20, 2023
Minor adjustment to the calculation model of some engines after testing on the dynamometer. Engines are updated up to 2024.
But the pilot jet recommendations are far off, ie 5000 to 10,000 asl only recommends a turn out on a/s when I’ve found 2 sizes down on pilot is necessary, seems to recommend rich settings here. It’s difficult to input elevation with the keyboard being in the way.
Response from developer
Hello, the issue with the elevation input is solved since last update.
In the case of the pilot jet recommendation, our model tries to enrich at low in order to be safe (most seizes are after WOT and suddenly close throttle), and that let us put a one size leaner main jet to maximize power.
