Doesn’t work 🤦
It sucks
Can’t get past settings window
How do I get past settings window to use please would give full marks otherwise
Works as advertised
The app does work, but requires some tweaking/experimenting with the microphone and speaker placement, signal/antenna.
Pretty good app, would like to see an update though. I copied signals from two different radios, an Icom ICR6 Communications Receiver and an XHDATA D808 portable shortwave radio . Both performed reasonably well tuned to 130.551 mHz Air band (AM).
Pretty good app, would like to see an update though. I copied signals from two different radios, an Icom ICR6 Communications Receiver and an XHDATA D808 portable shortwave radio . Both performed reasonably well tuned to 130.551 mHz Air band (AM).
Show more
Don’t Bother.
I downloaded this app and within 10 minutes had deleted it !
You’ll do the same !
You’ll do the same !
Requires some audio tweaking
First make sure you can get the RF from the planes as high quality as you can (good antenna, receiver tweaks).
Then it will require various experimenting placing the iPhone in good position so the phone mics can hear the transmission. And also experiment with the receiver’s volume.
You will see the data scrolling on the phone screen if you get all of the above correct. Now look at your data for quality decodes. If the data looks garbled, play around with the settings and positions again.
And....in the app’s configuration, make sure you have a file selected to store the data on the phone. Another thing I really dislike in the app is that if you open another app, all the data displayed in the ACARS screen goes blank and then if you want to view the data, you have to open the stored data files. It does this everytime you goto another app on your phone.
I want to try this app after adding an external microphone to my iPhone 8+ via a splitter cable. I really hope this will help with the decoding of crap data to quality data.
Good luck - when all is tweaked correctly, it is a great app. But honestly, use PDW on a PC.
Then it will require various experimenting placing the iPhone in good position so the phone mics can hear the transmission. And also experiment with the receiver’s volume.
You will see the data scrolling on the phone screen if you get all of the above correct. Now look at your data for quality decodes. If the data looks garbled, play around with the settings and positions again.
And....in the app’s configuration, make sure you have a file selected to store the data on the phone. Another thing I really dislike in the app is that if you open another app, all the data displayed in the ACARS screen goes blank and then if you want to view the data, you have to open the stored data files. It does this everytime you goto another app on your phone.
I want to try this app after adding an external microphone to my iPhone 8+ via a splitter cable. I really hope this will help with the decoding of crap data to quality data.
Good luck - when all is tweaked correctly, it is a great app. But honestly, use PDW on a PC.
Show more
受信機は必要
受信機でACARSの周波数にセットして、アプリを起動すれば受信出来るので…
暇つぶしにはなるけど…。
暇つぶしにはなるけど…。
It works.
VERY minimum application, it receives ACARS and that's it. You can put your earbud microphone next to radio speaker, but best bet would be a line-level microphone input. Even if packet doesn't fully decide properly, you get what does decode. Thats a plus. Wish it could run in the background. Only thing I understand is Tail number and type aircraft in packet. It would be nice if the rest of the jibberish is translated to what it actually means. However, it does work. I use in with SDR on the Airband.
Show more
Needs support for Apple Watch
Needs support for Apple Watch
Amateur
I have used top notch ham decoding apps and bad ones. I'm current iOS and this app works beautifully even unsquelched. This is my first time playing with this mode and this app let me confirm some very useful info. Even jumbled garbage tells you something. I had a minor career in comma and I am going to rate this a 5 because it works off the air( no cable), you have virtually unlimited number of folders. An improvement would be to have a bigger buffer per file but hey, it was worth it's weight In gold to ME, others not wanting specific data or range extrapolation might not rate it as high. All in all, if I wanted to follow say a friends aircraft using a minimal outside antenna for about 250 miles with just a used scanner and iOS device can have an easy relatively advanced system incorporating this quick down and cool app. I'm not into iOS, computers or apps and have no idea who or how this was written so take my 5 stars for what it's worth and who wrote it. A forever novice to iOS and apps!
Show more
Some issues with new ios9.0.2
Lots decoding errors displayed after upgrading to iOS 9.0.2. Hope you guys are working on fixing this.
Not good
Does not work on iOS 8.04 FAQ error with unable to read Avoid don't waste your money
Works better than most ACARS decoders
I’ve tried other ACARS decoding software and have been disappointed, but this app worked reasonably well. My only wish would be for it to work in the background.
I’ve already had $3 worth of fun with it...
I’ve already had $3 worth of fun with it...
Works perfectly
I have verified (iPhone 4/IOS 6) that this app works in both audio (scanner next to phone) and direct-connect (using home-made adapter) modes. If you are handy with electronics, build the adapter - it works better (there's a link to the plans in the description); if you're not, there are some commercial versions now available (google "iphone microphone adapter"). Obviously you need a scanner or other aircraft radio to receive signals in the first place. Nicely done app!
Show more
Does what it says!
Installed and placed near the speaker on my scanner. Within a few moments acars decodes appeared. A few issues with errors which were resolved with volume control adjustments.
Très bien
Seule app à décoder les messages ACARS à ma connaissance. Très bien, pour moi ça marche à merveilles parfois pas top mais ça provient de la réception.
Demand
I want to be able to plot on the map not only displays the data simply.
Irig
Tested with Irig
Neat, but needs work for the cost
Like the other reviews have alluded, this app operates like a proof-of-concept. Yes, it decodes, but that's it. There's no organization of data, no filtering, no background running of the app, screen colors are fixed at black on white. It's just simplistic.
Waste of money
Had this app sat at my radio for ages now with a superb reception but this app picked nothing up. Refund would be nice. Don't waste your time.
Perfect.
Excellent App, using it on iPad 2 and works great with just a standard VHF handheld scanner positioned beside the microphone.
To the developer just one suggestion, if you could please update it so that the decoder can run in the background while other apps are being used.
Many Thanks.
To the developer just one suggestion, if you could please update it so that the decoder can run in the background while other apps are being used.
Many Thanks.
