Garbage
Will not connect. App permissions won’t allow network connectivity. Tried on the latest iOS. Tried on different devices with iOS 26. Trash.
Blank dynamic island
The app is using the dynamic island (aka camera notch) when a printing task is going and there’s an active status notification.
The problem is that the island is pitch black and clicking it immediately opens the anycubic app.
Would be nice to have the dynamic island display printing progress or something, but having it look like it doesn’t have anything (aka clicking it won’t do anything) and open the app when misclicking while opening a notification center is really annoying. Give a visual indicator that the Dynamic Island has an app on it.
The problem is that the island is pitch black and clicking it immediately opens the anycubic app.
Would be nice to have the dynamic island display printing progress or something, but having it look like it doesn’t have anything (aka clicking it won’t do anything) and open the app when misclicking while opening a notification center is really annoying. Give a visual indicator that the Dynamic Island has an app on it.
Show more
Dark mode would be great
Super easy to use. Great for beginners to pros. Just wish it had a dark mode.
Failure to connect to its own device
The app will not connect to the Wi-Fi although the phone connects to it fine 👎 total failure. this device will not work. I cannot get it to join a network. The only way to get content to this thing is with the USB. What a joke.
Not good
The system was perfect before and with the cloud service everything is wrong and pushed all the great features out.
My story
I started 3d printing in November 2025 and now I have 1900 hrs and 1200 flawless prints. The Kobra 3 v2 combo is a work horse. I am thinking of getting the Kobra 4 but I have to sell some of my stuff so I can buy it. Would be nice if Anycubic would send me one so I could do a video and test it out , but I don’t have a print farm and I am not in a printing business. I am a 100% disabled veteran trying to get other vets into 3d printing
Show more
Great app
Super easy to use. Great for beginners to pros. Just wish it had a dark mode.
Absolut zufrieden
Einrichtung war Kinderspiel. Ich nutze die App lediglich um laufende Druckprozesse zwischendurch zu überwachen und das funktioniert einwandfrei. Das rumgeheule von einigen hier bezüglich der Druckqualität ist Quatsch. Druckeinstellungen werden im Sliceprogramm vorgenommen. Und damit muss man sich halt beschäftigen. Genauso wie mit den verschiedenen Filamenttypen.
Show more
App lag
The app lags A LOT
App won’t work
App won’t work for me to sign on
Barely work, other 3d printers have better projects to make
Barely work, other 3d printers have better projects to make.
Used to work
I have a few Anycubic printers. My oldest is a Kobra 2 Max. I use PrusaSlicer to slice my models, then upload the g-code to the cloud. Then I could initiate printing from the iOS app. With this latest 2.0.0 update, cloud files no longer show as available. Basically useless for working with my Max. I hope it gets fixed.
Show more
Update 2.0
Thank you for the new and improved experience
It’s actually pretty decent
The app performs surprisingly better than I expected. It very easy to use but sometimes limiting, but fundamentally get the job done.
Bad
You have to login which is a long process and hard to do all of and after you finish that you seem fine until they update it and you have to log back in.
Nothing but problems
I can connect from any windows pc without any problems but connecting from iPad using this application is another story. App says printer is off line and many my attempts to correct the issue are fruitless. I tried support help and still the same outcome. Please , fix the problem
Sehr gelungenes Update
Ich bin happy mit dem Update. Die vielen negativen Äußerungen kann ich nicht nachvollziehen. Wahrscheinlich kommt die Kritik vor allem von reinen App-Nutzern, die den Slicer am PC gar nicht benutzen. Daher dringender Tipp: für anständigen 3D Druck bitte unbedingt den vollwertigen Slicer nutzen, dann hat man wirklich Einfluss auf die Druckqualität etc. Diese App hier nutze ich nur zur Überwachung bzw. absolute Basics.
Show more
Good app but not bad update
I like the app but I think you should add more designs into the model library, however I did find a way to download prints from other websites such as make world and then upload them into the app. But in this new update that feature seems to be removed so now when I press print, I can see my old my old files that I had downloaded into it but I can’t add any more.
Show more
New ui love it
Finally they updated the app. A long waited ask from anycubic. I have 3 printers and i test the app with printer alot. This new app has good function and better ui. Thanks anycubic.
Ich bin zufrieden
Ich hab mit den Anycubic Cobra s1 als einstiger geholt . Was soll ich sagen … es gab fehldrucke aber auch deutlich mehr gute als schlechte .
Man kann alles erdenklich mögliche einstellen . Man muss sich eben mit dem Thema 3D-Druck auseinandersetzen.
Ich bin echt zufrieden ! Das Preis Leistungsverhältnis ist super .
Man kann alles erdenklich mögliche einstellen . Man muss sich eben mit dem Thema 3D-Druck auseinandersetzen.
Ich bin echt zufrieden ! Das Preis Leistungsverhältnis ist super .
Show more
