
ATEM Tally Light
Live tally & camera recording
0 ratings
Free
About
Turn your iPhone or iPad into a clear, full-screen tally display for your ATEM production setup.
RED, GREEN OR BLACK
See program/on air in red, preview in green, and standby in black. Discover an ATEM or connect by IPv4 address, choose an input, and optionally display its camera number and name. Each device remembers its own selection.
OPTIONAL CAMERA RECORDING
Connect one supported recording camera per device. Use manual Record/Stop, or enable Follow ATEM Record / Stop to relay the ATEM recorder's transitions to that camera. One ATEM can be followed by multiple devices, each with its own camera target.
Tested recording setups include Blackmagic PYXIS 6K, original RED KOMODO over a network, and Nikon ZR V1.10 over USB on iPhone. The Pocket 6K Pro profile requires Blackmagic 8.6 beta firmware. Compatibility notes in the app describe model and firmware limits.
FOR YOUR PRODUCTION NETWORK
Requires external ATEM hardware and a reachable local network. Recording requires a supported camera, its documented settings, and compatible connections. ATEM Mini Pro requires a recording drive attached for the recorder-state follow trigger. Camera-only commands that do not change the ATEM recorder state are not relayed.
Keep the app open while using tally and recording follow. A lost connection clears stale tally and disables uncertain camera controls. Check camera REC indicators after an interruption. Recording control does not provide timecode synchronization or frame-accurate starts.
No app account, subscription, developer relay, or app analytics service. Requires iOS/iPadOS 17 or later. USB camera setups require compatible host hardware and a data cable.
Independent software; not affiliated with Blackmagic Design, Nikon, or RED.
Show more
What's New in ATEM Tally Light
1.0
November 6, 2026




