Tagging
Need a way to tag when you are inside your vehicle, a subway an airplane. Data without tags and context is useless.
Leaves much to be desired
Issues with connectivity and wildly swaying readings
Unable to really have faith in the accuracy of the device.
Unable to really have faith in the accuracy of the device.
Works seamlessly
App paired seamlessly with my iPhone. Showed data in an accessible manner. Love using this at work and when I’m at home
Highly recommended
Highly recommended
Perfect for tracking air quality.
I like it a lot. At first, I was concerned with the device battery only lasting a day but then I realized I can change the measurement interval to 15 min within the app while still seeing real-time readings when I open it. Now the battery lasts over a week.
Works great
The app is easy to use and pretty straightforward. Measurements on the screen change quickly depending on real-time air pollution levels. Love it
Great for Home Project Air Quality Tracking
I bought Atmotube to track VOCs during my home renovation. It definitely helped me keep track of when my painting and cleaning supplies stopped offgassing. I was also surprised that it picked up offgassing from some of our new furniture that we ended up airing out for a bit. The app is easy to use. It does sometimes take up to 30 seconds to connect to the device, but you can speed that up by shutting down the app and opening it again. Very happy with the product.
Show more
Drains battery even when not using
The app drains phone battery even when not using. In iPhone settings -> battery I can see that this app is using the battery. I have to kill this app (swipe up) to prevent this. Annoying.
The graphs are very poor. Other apps, for example Govee thermometer and hygrometer, have much better graphs.
The graphs are very poor. Other apps, for example Govee thermometer and hygrometer, have much better graphs.
Battery drain
Experiencing extreme battery utilization from the app even after force close.
Support
According to ATMOS support, the app has the capability to convert barometric pressure to mean sea level. I’m at 5,167 feet so the display algorithm constantly reports “It’s stormy outside” due the uncorrected 24.4 inHg device reading. Quoting support “ The Atmotube PRO can calculate altitude data using GPS data so therefore the device can make this adjustment in the Atmotube app by itself.”
Despite my follow up question to ATMOS support on how to set the app to actually do this, I’ve received no response.
Continued no response from support will prompt me to return the unit.
Despite my follow up question to ATMOS support on how to set the app to actually do this, I’ve received no response.
Continued no response from support will prompt me to return the unit.
Show more
Super Buggy
App crashes every time I try to look at daily data
Need to fix bugs
PM meters only record every 15 minutes. It used to record every minute. Please fix this bug
Needs customization and streamlining: too much filler
Needs customization options. Theres a lot of pointless text where I would prefer data, for example explaining that “people generally feel comfortable in temperatures between..”. I know when its hot or cold! Feels like its just filling space. I also would like to set when the map and average score reset: it is pointless to know what the air quality was on my commute months ago.
The charts are decent, though again i would prefer customization, like to put PM on top versus on bottom. For something like this, people that buy a product like this likely know something about air pollution and it would be nice to put the data itself front and center rather than the dumbed-down things like the air quality score or comfort zone. Or at least to be able to configure it that way.
The charts are decent, though again i would prefer customization, like to put PM on top versus on bottom. For something like this, people that buy a product like this likely know something about air pollution and it would be nice to put the data itself front and center rather than the dumbed-down things like the air quality score or comfort zone. Or at least to be able to configure it that way.
Show more
Slo
Takes extremely extremely long to connect to tube with the tube right next to the app. Is terrible
Pretty good overall, but VOCs very slow to respond
If you use accessible fonts on your phone, then if the values go above 9 you can’t actually see the individual scores (you just get the first digit).
I’ve been very disappointed by the speed of response of the VOCs. I got it primarily to deal with this, as I’ve complex airborne chemical allergies.
Something has been irritating me in the bedroom. My suspicions were an Ikea unit, so I put the unit in the cupboard overnight. Watched it uptick every minute and hits before full effect felt (which I’d expected, as I’d had to open the door to put the Atmotube in!). It confirmed the unit as a high source of VOCs (IKEA unit has been offgassing in the bedroom for a couple of years - dread to think what it was like at the start!).
What wasn’t so good was I then took the Atmotube outside to clear (rural area), and it took almost an hour to reflect ambient conditions. I’d wanted to use this to help identify chemical laden shops (hold breath, pop in, wave Atmotube around to get VOC score, pop out breathe, assess whether to go in or repeat process in another shop). Simply won’t work if it takes an hour to reflect VOC conditions and another to reset to ambient conditions.
In summary, great for particulates (very responsive and I would say accurate going by my other meters) but VOC performance is underwhelming
NOTE: this was updated to remove comments on no detailed history (I eventually found it!)
I’ve been very disappointed by the speed of response of the VOCs. I got it primarily to deal with this, as I’ve complex airborne chemical allergies.
Something has been irritating me in the bedroom. My suspicions were an Ikea unit, so I put the unit in the cupboard overnight. Watched it uptick every minute and hits before full effect felt (which I’d expected, as I’d had to open the door to put the Atmotube in!). It confirmed the unit as a high source of VOCs (IKEA unit has been offgassing in the bedroom for a couple of years - dread to think what it was like at the start!).
What wasn’t so good was I then took the Atmotube outside to clear (rural area), and it took almost an hour to reflect ambient conditions. I’d wanted to use this to help identify chemical laden shops (hold breath, pop in, wave Atmotube around to get VOC score, pop out breathe, assess whether to go in or repeat process in another shop). Simply won’t work if it takes an hour to reflect VOC conditions and another to reset to ambient conditions.
In summary, great for particulates (very responsive and I would say accurate going by my other meters) but VOC performance is underwhelming
NOTE: this was updated to remove comments on no detailed history (I eventually found it!)
Show more
App Needs Serious Work
Currently the app displays a number of things that I have exactly zero use for. If the ability to customize the interface were available I’d actually use it. I’m interested in using in my shop when I’m welding or painting, but the app is so annoying that I’ve given up on it.
Searching
Takes forever to search and sync Eve when the tube is right next to my phone with the app running
Bogus
If I click on day it will say that air quality at a certain time was 42. If I click on the same time under hour it says air quality is 92.
Does not record all data
Partially synced and doe not record all data. Sync problem
