Absolute Garbage
As a microcontroller developer who releases a lot of MIT-licensed code, I was looking for a nice Bluetooth app for my iPhone that I could use to my interact with my favorite microcontroller. I don’t use the Arduino, but that doesn’t matter; it’s all about serial communications. Let me just keep this short. This app will waste your time and your money. It barely works, and has a horrible interface that is not intuitive. It looks very sexy in the App Store, but after you’ve spent your 12 bucks to unlock everything, it’s nothing but a nightmare.
Show more
Ok
Very good
Unusable
App will not stay connected long enough to build a button. Do not buy!
Tệ
Tệ
Only recognizes smart devices
Would give a better review if it could see Bluetooth headsets
No agarró conexión.
No conecto mi robot, no agarra las conexiones
Awful app
Worst purchase of my life
I decided to purchase the "custom" mode to make a control panel for my BLuno. It only allows you to add buttons and switches, no sharing sensor data and no custom controls. Besides the very limited customization, the Bluetooth capability– the ENTIRE POINT of the app– barely works as intended. It's a pain to connect your board. Sometimes it registers as simultaneously connected and not connected so you need to restart the app. Don't waste your time on this and get a free standard Bluetooth scanning app. Any scanner will have better control and more information than this piece of junk app.
I decided to purchase the "custom" mode to make a control panel for my BLuno. It only allows you to add buttons and switches, no sharing sensor data and no custom controls. Besides the very limited customization, the Bluetooth capability– the ENTIRE POINT of the app– barely works as intended. It's a pain to connect your board. Sometimes it registers as simultaneously connected and not connected so you need to restart the app. Don't waste your time on this and get a free standard Bluetooth scanning app. Any scanner will have better control and more information than this piece of junk app.
Show more
Great App
I can’t get it to attach to my 05Bluetooth adapter for Arduino.
Falcon K rocket
Just did a latency test.. 68 mS! Plaz some one tell me the best electrics to buy
Text me the list @ 386-480-8483. Money is a problem. Thans
Text me the list @ 386-480-8483. Money is a problem. Thans
Space K rocket
We have been building and designing several different styles of drones from ultra long range called “ big hex” hexocopter to private protection drones that fly a pre programmed course around ur house if one of many sensors triggers then lands back on its pad and begins charging. All by it self
We have developed 7 types of FPV race freestyle and ultra long range. 80 miles!
Our next project we’re building is a 6” 2 stage rocket 1 is engine B12-4 2 is C15 10
The unique part of this is we want to be able to read telemetry and gather blackbox. Here is the challenge. We are using arduiono parts only. That means we Need a small powerful Arduino that has at a clock speed to have prefials to run a 6 axi gyro “ serial of course. GPS with barometer, a pwm anolog servo controls. The main board will also need a crossfire RX or ELRS in order to get real time updates and if need take manual adjustments or “ for safety incinerate of something goings wrong. I am asking the community if they have herd, know, or have done this before and what list of Arduino parts I must obtain we have the rocket built using think cardboard, carbon fiber and lots of 3d printing. Now it’s just time for the electronics. If anyone knows what’s the best. Plz send me a list and ur name and lunch is set for January 4th live on YouTube and ticktock and would be happy to give you credit for ur contribution
Thank
Owner StiXs UAV Tech LLc
Eli H.
We have developed 7 types of FPV race freestyle and ultra long range. 80 miles!
Our next project we’re building is a 6” 2 stage rocket 1 is engine B12-4 2 is C15 10
The unique part of this is we want to be able to read telemetry and gather blackbox. Here is the challenge. We are using arduiono parts only. That means we Need a small powerful Arduino that has at a clock speed to have prefials to run a 6 axi gyro “ serial of course. GPS with barometer, a pwm anolog servo controls. The main board will also need a crossfire RX or ELRS in order to get real time updates and if need take manual adjustments or “ for safety incinerate of something goings wrong. I am asking the community if they have herd, know, or have done this before and what list of Arduino parts I must obtain we have the rocket built using think cardboard, carbon fiber and lots of 3d printing. Now it’s just time for the electronics. If anyone knows what’s the best. Plz send me a list and ur name and lunch is set for January 4th live on YouTube and ticktock and would be happy to give you credit for ur contribution
Thank
Owner StiXs UAV Tech LLc
Eli H.
Show more
Help
Necesito ayuda, cómo se co figura los botones de gamepad
Very cool
Loving this
Basically useless on iPhone
“Fully Custom” sounds amazing, in reality it is only buttons, which once created are completely un editable, you can’t even delete them. No instructions, and pretty damn expensive for essentially nothing. Don’t make the mistake I did and purchase the unlocks!
Response from developer
Long press for editing/delete
This is troubling
Nothing but a locked screen
Some good but more bad
This was a really simple and great app at first it worked, The controller would definitely have been worth the 5$ if it worked reliably, then it didn’t it only works if Arduino is connected to computer. This app cause me a lot of headache thinking something was wrong with my Arduino circuit, testing every wire and making sure it’s at right voltage to only find out hours later that it was the app acting up. It’s already bad enough that iOS is really dodgy with Arduino, just download a hm10 reader on App Store and manually write the commands, so much better.
Show more
Arduino Bluetooth
Esta de lujo
Useless
Simply doesn’t work. No sign of life! Blank page.
Some feedback and improvements
Hi this is my first review ever as an 8+ years iphone user.
First of all thanks for implementing this I have been using it with my pico and ble module. I wanted to support it so I purchased everything. However there are some bugs in the app. First:
When you go back to the main menu it is still connected to the device however there is no chance to reach it. always requires restarting the app. It would be also nice to connect directly to your project instead establish the connection everytime. It would be nice to remember the device.
2) Gamepad doesnt work for me.
3) Lack of customization of the buttons are painful. It would be nice to scale buttons drag them as you want and create like a turntable menu with pre-defined button sets. For example I would like to use a joystick and 10 different keys but there is no way to use such a thing. Needs more freedom.
4) Overall UI is much better than any other app in the app store congrats.
First of all thanks for implementing this I have been using it with my pico and ble module. I wanted to support it so I purchased everything. However there are some bugs in the app. First:
When you go back to the main menu it is still connected to the device however there is no chance to reach it. always requires restarting the app. It would be also nice to connect directly to your project instead establish the connection everytime. It would be nice to remember the device.
2) Gamepad doesnt work for me.
3) Lack of customization of the buttons are painful. It would be nice to scale buttons drag them as you want and create like a turntable menu with pre-defined button sets. For example I would like to use a joystick and 10 different keys but there is no way to use such a thing. Needs more freedom.
4) Overall UI is much better than any other app in the app store congrats.
Show more
Disconnects a lot
Are used to test function in the free version many times before making the decision to purchase the unlock everything option. I noticed that after purchase, my Arduino will not stay connected via Bluetooth to the app anymore, the app locks up frequently, and I had none of those problems when I was using it in the free mode. The options with everything unlocked are somewhat limited, you can’t see what the controller looks like or what the options are for it before buying. While it kind of works for what I want, I wouldn’t recommend this product
Show more
Doesn’t work
Won’t stay connected to Arduino.
